• Steel and Composite Structures
• /
• 제3권6호
• /
• pp.439-450
• /
• 2003

The finite strip transition matrix technique, a semi analytical method, is employed to obtain the buckling loads and the natural frequencies of symmetric cross-ply laminated composite plates with edges elastically restrained against both translation and rotation. To illustrate the accuracy and the validation of the method several example of cross play laminated composite plates were analyzed. The buckling loads and the frequency parameters are presented and compared with available results in the literature. The convergence study and the excellent agreement with known results show the reliability of the purposed technique.

• Steel and Composite Structures
• /
• 제28권6호
• /
• pp.735-748
• /
• 2018

In this study, the semi-analytical finite strip method is adopted to examine the free vibration of cylindrical shells made up of functionally graded material. The properties of functionally graded shells are assumed to be temperature-dependent and vary continuously in the thickness direction according to a simple power law distribution in terms of the volume fraction of ceramic and metal. The material properties of the shells and stiffeners are assumed to be continuously graded in the thickness direction. Theoretical formulations based on the smeared stiffeners technique and the classical shell theory with first-order shear deformation theory which accounts for through thickness shear flexibility are employed. The finite strip method is applied to five different shell theories, namely, Donnell, Reissner, Sanders, Novozhilov, and Teng. The approximate procedure is compared favorably with three-dimensional finite elements. Finally, a detailed numerical study is carried out to bring out the effects of power-law index of the functional graded material, stiffeners, and geometry of the shells on the difference between various shell theories. Finally, the importance of choosing the shell theory in simulating the functionally graded cylindrical shells is addressed.

• Structural Engineering and Mechanics
• /
• 제60권3호
• /
• pp.529-545
• /
• 2016

In this article, the generalized coupled non-Fickian diffusion-thermoelasticity analysis is carried out using an analytical method. The transient behaviors of field variables, including mass concentration, temperature and displacement are studied in a strip, which is subjected to shock loading. The governing equations are derived using generalized coupled non-Fickian diffusion-thermoelasticity theory, which is based on Lord-Shulman theory of coupled thermoelasticity. The governing equations are transferred to the frequency domain using Laplace transform technique and then the field variables are obtained in analytical forms using the presented method. The field variables are eventually determined in time domain by employing the Talbot technique. The dynamic behaviors of mass concentration, temperature and displacement are studied in details. It is concluded that the presented analytical method has a high capability for simulating the wave propagation with finite speed in mass concentration field as well as for tracking thermoelastic waves. Furthermore, the obtained results are more realistic than that of others.

• 한국정밀공학회지
• /
• 제7권1호
• /
• pp.37-52
• /
• 1990

In this study, the characteristics of cooling and rolling during strip casting process is obtained in comparison with the experimental and analytical results. The prupose of this study is to effectively analyze the thermal and mechanical deformation of roller applying the results of the heat transfer and the pressure distribution to boundary conditions. And then the relation between strip thickness and roll deformation is shown. The second purpose is to obtain the proper condition of the continuous casting for stainless steel. The summary and conclusions can be made on the basis of the results obtained by the theories and experiments. a) The strip casting condition for the fine surface quality of tin-alloy as-cast material was obtained in accordance with the velocity of roll rotation and initial roll gap. b) The experimental condition that the dimension of the cast strip thickness coincide with that of the initial roll gap was according to the experimental result of continuous casting by twin-roll type. c) The thermoelastic finite element model to calculate the roll deformation is represented. Thermoelastic model prediction for the roll deformation are in good agreement with the experimental results considering the thermal expansion of the roll. d) The higher cooling rates were obtained by a twin-roller quenching technique. Also quenched microstructure of the rapidly solidified shell was verified. e) The magnitude of roll deformation due to the thermal expansion and roll separating force is quantit- atively represented in the analysis of continuous casting for stainless steel.

• 한국공간구조학회논문집
• /
• 제1권1호
• /
• pp.157-166
• /
• 2001

In general, the cutting pattern of the membrane structures is determined by dividing the complicated curved 3-D surface into several 2-D plane strip by using flattening technique. In this procedure, however, some discrepancies ore occurred between actual stresses of equilibrated state and designed uniform stresses because the material properties are not considered. These deviations can cause the critical structural problems, wrinkling or overstress, and thus a optimization process should be considered. In this paper, a new analytical method for determining an optimum cutting pattern considering material properties is presented. Here, iterative procedure is introduced to decrease the errors caused in numerical process. The optimization method proposed can diminish the deviations occurred by material properties and numerical errors, simultaneously. As a results, it is shown that the final stress distributions for the HP shell model are sufficiently near to design stress distributions, and it can be concluded that this method can be used to obtain the optimized cutting pattern of membrane structures.

• 대한임상검사과학회지
• /
• 제47권3호
• /
• pp.105-111
• /
• 2015

2013년 12월 말, 에볼라 바이러스는 서아프리카에서 발발했다. 기니를 시작으로 라이베리아, 시에라리온으로 빠르게 퍼지게 되었다. 에볼라 바이러스(자이르형 에볼라 바이러스)는 외피, 비분절, 음성단일가닥 RNA바이러스이다. 에볼라 바이러스는 인수공통 전염병이다. 바이러스는 처음 감염된 야생동물과 접촉 한 후, 혈액, 땀, 소변, 정액, 모유 등의 체액과의 직접적인 접촉을 통해 사람 대 사람으로 전염된다. 그러나 공기로 전염되지는 않는다. 잠복기는 2~21일이다. 에볼라 바이러스는 내피세포, 단핵 식세포, 간세포를 감염시킨다. 감염 후 바이러스가 숙주의 면역 시스템을 회피하기 위해 여러 메커니즘을 사용한다. 이것은 혈관, 간 등의 내부 조직 및 기관에 막대한 피해를 주어 죽음에 이르게 한다. RNA 바이러스에 대한 대부분의 실험은 역전사 중합효소 연쇄반응(RT-PCR)라 기술에 의존한다. 이 방법은 매우 민감하지만 숙련된 과학자, 전원 공급 장치 요구하며 비싸다. 스트립 분석기법(효소면역분석법, ELISA)은 에볼라 바이러스 항원 또는 항체를 검출한다. 이 기법은 저렴하며, 전기, 냉장 장치가 필요하지 않다. 실험적인 치료 및 백신 개발에 관한 지속적인 노력에도 불구하고, 에볼라 바이러스 질환은 현재 치료법에 제한이 있다. 그러므로 신속하고 정확한 진단이 환자관리, 감염예방, 관리대책에 있어서 매우 중요하다.

• 한국재난정보학회 논문집
• /
• 제13권1호
• /
• pp.81-88
• /
• 2017

이 논문에서는 강재 보와 보강을 위하여 부착한 탄소섬유판의 동일거동을 분석하기 위하여 시험과 유한요소해석을 수행하고, 시험 및 해석 결과를 이용한 분석을 실시하였다. 현재 국내외의 연구에서는 복합재료를 사용한 보수 보강 복구에 대한 사용검토가 많이 연구되어지는 실정에서 섬유보강 복합재료는 얇고 강도가 좋으며 가벼워 구조물의 보강 시에 사하중의 증가를 발생시키지 않고 부재의 치수 증가에도 영향이 없어 매우 유용한 재료로 부각된다. 그러나 노후화에 따른 부착력 저하 등의 문제와 경제성 및 설계상의 어려움으로 사용이 극히 제한적인 부분이다. 이 연구에서는 탄소섬유판이 부착된 단순한 강재보의 성능을 평가하였으며, 부착성능 측면에서는 양호한 사용성능을 가지는 것으로 나타났다. 향후 노후화에 대한 검토가 수행된다면 실제 구조물에 대한 적용에도 문제가 없을 것으로 판단된다.

• Journal of Electrochemical Science and Technology
• /
• 제14권1호
• /
• pp.1-14
• /
• 2023

The overuse of pesticides in agricultural sectors exposes people to food contamination. Pesticides are toxic to humans and can have both acute and chronic health effects. To protect food consumers from the adverse effects of pesticides, a rapid monitoring system of the residues is in dire need. Molecularly imprinted polymer (MIP) on a screen-printed electrode (SPE) is a leading and promising electrochemical sensing approach for the detection of several residues including pesticides. Despite the huge development in analytical instrumentation developed for contaminant detection in recent years such as HPLC and GC/MS, these conventional techniques are time-consuming and labor-intensive. Additionally, the imprinted SPE detection system offers a simple portable setup where all electrodes are integrated into a single strip, and a more affordable approach compared to MIP attached to traditional rod electrodes. Recently, numerous reviews have been published on the production and sensing applications of MIPs however, the research field lacks reviews on the use of MIPs on electrochemical sensors utilizing the SPE technology. This paper presents a distinguished overview of the MIP technique used on bare and modified SPEs for the detection of pesticides from four recent publications which are malathion, chlorpyrifos, paraoxon and cyhexatin. Different molecular imprint routes were used to prepare these biomimetic sensors including solution polymerization, thermal polymerization, and electropolymerization. The unique characteristics of each MIP-modified SPE are discussed and the comparison among the findings of the papers is critically reviewed.