• Title/Summary/Keyword: Stress- ratio

Search Result 4,009, Processing Time 0.033 seconds

Investigation on Translocation of De-icing Salts influenced by the Intensity of Foliar Damage of Roadside Trees in Chung-ju City (충주시 가로수의 황변정도에 따른 토양 내 제설제 성분의 흡수이행성 평가)

  • Kim, Jae-Young;Kim, Won-Tae;Yoon, Young-Han;Ju, Jin-Hee
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.21 no.4
    • /
    • pp.1-10
    • /
    • 2018
  • Use of de-icing salts results in accumulation of high concentrations of ions on roadside soils and tree. The purpose of this study isto determine translocation of seasonal impact of exchangeable cations originating from de-icing salt on roadside surface soil-plant influenced by the intensity of foliar damage (NY = 0-25%, SY = 26-50%, CY = 51-75%) of trees. This paper investigated the concentration of four exchangeable cations ($K^+$, $Ca^{2+}$, $Na^+$, and $Mg^{2+}$) on the roadside surface soil. The tree (Ginko biloba) samples were collected from the Konkuk and Judeok intersections in Chung-ju city. The sequential extraction procedure was applied to 120 soil samples of the soilsurface and 30 tree samples. Four cation exchange ions were determined by ICP-OES. The content of four exchangeable cations present on roadside soil was found to be the lowest in NY but highest in CY from tree pits in the order of NY < SY < CY. Especially, the results were apparent during spring time compared to other seasons. Soil collected from tree pits had the highest concentration of $Ca^{2+}$ possibly due to a higher volume of traffic on those streetsresulting in splashing of more calcium chloride ($CaCl_2$). The analysis of three exchangeable cations ($K^+$, $Mg^{2+}$, and $Na^+$) in the tree leaves revealed higher levels than roadside surface soil when foliar damage ratio increased in the order of NY < SY < CY in summer. In addition, a strong positive linear relationship was observed between the concentration of exchangeable cations in soil and trees. It is hypothesized that the results of this study can be a valuable baseline for managing de-icing salt on roadside soil and trees, in order to mitigate the salt stress that can damage the roadside soil and trees.

Effect of Garlic Oil (diallyl disulfide)/ Vitamin A( retinol acetate on Heat Shock Protein Induction in Cadmium Treated Rats. (마늘유(diallyl disulfide)와 비타민 A(retinol acetate)가 카드뮴 투여 랫드에 미치는영향)

  • 김판기
    • Journal of Food Hygiene and Safety
    • /
    • v.13 no.2
    • /
    • pp.171-187
    • /
    • 1998
  • Garlic occupies a special position among the many foods of vegetable origin because it is the sole food for Koreans during the their lives. And vitamin A has been ingested by forms of food or additives. Cadmium has been described as one of the most dangerous trace elements in the food and environment of man and livestocks. Since the de novo synthesis of stress proteins can be detected early after exposure to some agents, analysis of cadmium-induced changes in gene expression , ie. alterations in patterns of protein synthesis, may be useful to develop as biomarkers of exposure and damage for food hygiene. He acute and chronic combine effects of cadmium (Cd, CdCl2 20mg/kg), garlic oil(Dds: diallyl disulfide 50mg/kg, 3 times a week) and vitamin A(Ra: retinol acetate 50,000 IU/kg, 3 times a week) on Wistar male rats were evaluated concerning cadmium contents, tissues enzyme activity, HSP expression histopathological and electron microscopical examinations. The results of the study are as follows ; 1. Less cadmium was absorbed through the digestive tracts, but the ratio of contents in tissue were not changed by the simultaneous adminstration of diallyl disufide or retinol acetate. 2. ALT(alanine aminotransferase) , AST(aspartate aminotransferase), glucose, BUN (blood urea nitrogen), creatinine, the key indices of the clinical changes in hepatic and renal function were significantly hanged by the cadmium treatment after 1 week in liver, after 4 weeks in kidney. 3. Histopathological changes in cadmium treated rats were appeared at 8 weeks age treatment in kidneys. Homogenous eosinophilic material was accumulated in cortical and collecting tubular lumens at 16 weeks. Degenerated or necrotized tubular cells were observed in cortex and medulla. Degenerated seminiferous tubules and homogeneous eosinophilic material was seen in interstitial tissue of rat treated with cadmium for 16 weeks. Calcium deposits were seen in degenerated seminiferous tubules and the tubules showed severe calcification of rat treated with cadmium for 16 weeks. Electron microscope changes in kidney were observed in rats treated with CdCl2 20 mg/kg. Proximal convoluted tubule cells showed selling of cytoplasm and narrow lumen. Capillary endothelial cells showed cytoplasmic vacuoles and swelling. Degenerated epithelial cells were accumulated in tubular lumen of kidney. 4. Enhanced synthesis of 70 KDa relateve molecular mass proteins were detected in 2 hours after cadmium, exposure, with maximum activity occurring at 8~48 hours. Induction of HSP 70 was evident at proximal tubules and glomeruli in kidney. Testicular cells produced enough HSP to be detected normally. From the above results, it could be concluded that HSP70 induction by the cadmium treatment was a rapid reaction to indicated the exposure of xenobiotics, and retinol acetate reduced the cadmium induced nephrotoxicity.

  • PDF

Effect of Bedding Conditions on Earth Pressure Distribution of Embedded Pipes (EPS베딩재가 지중매설관의 토압에 미치는 영향)

  • Yoo, Nam-Jae;Lee, Hee-Kwang;Park, Byung-Soo;Jeong, Gil-Soo;Sim, Do-Sik
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.11 no.6
    • /
    • pp.121-130
    • /
    • 2007
  • In this paper, large scale experimental model tests were performed to investigate the distribution of earth pressure acting on embedded rigid pipes having different bedding conditions. For these tests, very light weighted EPS blocks were installed at top and bottom of the rigid pipe and Jumunjin Standard Sand was used as a ground material. As results of model tests, for the case of no bedding on the pipe, the measured pressure at the bottom of the pipe was $4.96_{tf/m^2}$ whereas they were in the range of $1.87{\sim}4.96_{tf/m^2}$ in the case of EPS beddings being installed at the top and the bottom of the pipe. Therefore, for the case of EPS bedding being installed, the ratio of reduced pressures acting on the pipe, compared with the case of no EPS beddings, were in the rage of 16~62%. As a result of parametric test with changing the locations of EPS bedding, the trend of reducing the stress acting on the pipe was in the order of bottom bedding, top bedding, and top and bottom bedding. Effect of bedding positions on the reduced magnitude of acting pressure on the pipe was more significant in the case of top bedding than in the case of the bottom bedding.

Production of Extrudates Formulated from Pacific Sand Lance Sauce By-Product and Dried Biji (까나리 액젓 부산물과 건조 비지를 첨가한 압출성형물의 제조)

  • Han, Gyu-Hong;Kim, Byung-Yong;Lee, Jae-Kwon
    • Korean Journal of Food Science and Technology
    • /
    • v.34 no.2
    • /
    • pp.186-193
    • /
    • 2002
  • This study was conducted to enhance the protein quality of wheat flour extrudates with the addition of fish sauce by-products and dried biji. The experimental design was used to determine the optimum ratio of each ingredient. The compositional and functional properties of test extrudate were measured, and these values were applied to the mathematical models. A canonical form and trace plot showed that the influence of each ingredient on the mixture final product. Protein content of extrudate was increased by the addition of the dried biji, and bending failure stress of extrudate became hardened due to interaction effects between dried biji and pacific sand lance sauce by-product. Also, the addition of dried biji decreased ash and salt contents. An optimum formulation was obtained as 15.83 : 44.17 : 40% with numerical and 15.74 : 44.26 : 26.40% with graphical method (pacific sand lance sauce by-product : dried biji : wheat flour). Based on the growth performance, feed conversion efficiency was slightly lower than control group, but the protein content in feed extrudate increased to a large extent compared to that mixed with wet biji.

Orientations of Vertical Rift and Grain Planes in Mesozoic Granites, Korea (국내의 중생대 화강암류에서 발달하는 수직의 1번 및 2번 면의 방향성)

  • Park, Deok-Won
    • The Journal of the Petrological Society of Korea
    • /
    • v.16 no.1 s.47
    • /
    • pp.12-26
    • /
    • 2007
  • We have studied orientational characteristics of vertical rift and grain planes developing in 108 quarries for Mesozoic granites. Orientations of these planes vary in different localities. In general, orientations of these planes are predominantly NNE in South Korea. From the regional distribution chart, orientations of these planes show three dominant sets in terms of frequency orders: (1) $N2{\sim}10^{\circ}E(1st-order),\;(2)\;N15{\sim}25^{\circ}E(2nd-order),\;(3)\;N45{\sim}70^{\circ}E,\;N10{\sim}30^{\circ}W\;and\;N70{\sim}80^{\circ}W(3rd-order)$. These granite quarries are classified by the relative difference in the easiness of rock splitting between horizontal and vertical quarrying planes into: R-type, G-type, and H-type. The results showed that quarries for Triassic granites belong to R and G-types;those for Jurassic granites belong to R, G and H-types. In addition, quarries for Cretaceous granites belong mainly to R-type. Among these quarry types, the most diverse type was identified in the quarries for Jurassic granites. R-type (77.8%) shows a higher distribution ratio compared with G and H-types (22.2%). In general, anisotropy of physical properties is found in granitic rocks and there exists close correlation between orientations of granitic rock splitting planes and those of the open microcracks. Meanwhile, it has been reported that preferred orientations of open microcracks suggest maxinum principal stress orientations.

GEOMETRIC NINLINEAR ANALYSIS OF UNERGROUND LAMINATED COMPISITE PIPES (기하학적 비선형을 고려한 지하매설 복합재료 파이프의 해석)

  • 김덕현;이인원;변문주
    • Computational Structural Engineering
    • /
    • v.2 no.1
    • /
    • pp.65-70
    • /
    • 1989
  • An analytical study was conducted using the Galerkin technique to determine behaviour of thin fibrereinforced and laminated composite pipes under soil pressure. Geometric nonlinearity and material linearity have been assumed. It is assumed that vertical and lateral soil pressure are proportional to the depth and lateral displacement of the pipe respectively. It is also assumed that radial shear stress is negligible because the ratio of thickness to the radius of pipe is very small. The above results are verified by the finite element analysis.

  • PDF

Relationships between Obesity Types and Periodontitis according to Characteristics of Subjects (대상자 특성에 따른 비만유형과 치주질환의 관련성)

  • Kong, Young-Mi;Han, Gyeong-Soon
    • Journal of dental hygiene science
    • /
    • v.12 no.3
    • /
    • pp.279-286
    • /
    • 2012
  • The aim of this study was to evaluation the association between obesity and periodontitis according to the characteristics of subjects. The subjects of this study was 429 subjects aged 19 years or older from March to May, 2010. Data were analyzed with chi-square test, Multivariable logistic regression and Statistics were analyzed linear regression analysis using SPSS 18.0. WHR had dose-effect relationship with the number of sextants with periodontitis. With regard to relationships between obesity type and periodontitis depending on characteristics of objects, the WHR obesity group showed results higher than the normal group, for twice(OR: 2.24; 95% CI: 1.17-4.28) and three times or more(OR: 3.34; 95% CI: 1.53-7.27) in frequency of daily teeth brushing, 0-3 points(OR: 2.47; 95% CI: 1.09-5.59) and 4-6 points(OR: 3.99; 95% CI: 1.75-9.08) in the self-perception of stress level, and the group with 8 hours or more(OR: 4.20; 95% CI: 2.11-8.34) in the sleeping time. If anyone is judged to have obesity by WHR, we can say that the risk to have periodontitis together with it is 2.56 times more likely(95% CI: 1.58-4.13).

Health and Nutritional Factors Related to Hypertension of Subjects Aged Over 50 in High Income Class - Based on the 2005 Korea National Health and Nutrition Examination Survey - (50세 이상 고소득층 성인 및 노인의 고혈압 관련 건강 및 영양 요인에 관한 연구 - 2005년 국민건강영양조사 결과에 근거하여 -)

  • Ahn, So-Hyun;Son, Sook-Mee;Park, Jin-Kyung
    • Journal of the Korean Dietetic Association
    • /
    • v.15 no.3
    • /
    • pp.311-327
    • /
    • 2009
  • This study was performed to determine the health and nutritional risk factors associated with hypertension in Koreans over the age of 50 in a high-income class (more than twice as much family income as the 2005 Korean minimum cost of living, 668,540 Won). A total of 505 subjects aged over 50 from the 2005 Korean National Health and Nutrition Examination Survey (KNHANES) were divided into two groups: A hypertension group (HG) (N=151, Systolic Blood Pressure ${\geq}$140 mmHg or Diastolic Blood Pressure ${\geq}$90 mmHg) and normal group (NG) (N=354). Subjects who took hypertension medicines or underwent diet therapy were excluded. In HG, mean daily alcohol intake and the amount of alcohol consumption per one occasion were significantly higher than in NG, respectively. A greater number of hypertension subjects answered that they drank alcohol to reduce stress as compared to normal subjects. HG also took fewer dietary supplements than NG. Mean body mass index (BMI), waist circumference, fasting blood sugar level, and 2 hour postprandial blood sugar following a glucose load were significantly higher in HG than in NG, respectively. Also, iron, thiamin, and niacin intakes and the consumption frequency of seaweeds were significantly lower in HG than in NG, respectively. Finally, obesity (BMI ${\geq}$25 $kg/m^2$), abdominal obesity (waist circumference ${\geq}$90 cm for males, ${\geq}$ 80 cm for females), high blood sugar level 2 hours after an oral glucose load (${\geq}$140~200 mg/dl), and hypertriglyceridemia (serum TG ${\geq}$200 mg/dl) were related to a significantly higher risk of hypertension in the subjects (odds ratio: 1.884~3.040). In conclusion, dietary factors such as higher alcohol consumption; lower intakes of iron, thiamin, and niacin; lower consumption frequency of seaweeds; and metabolic syndrome were associated with hypertension in the study subjects.

  • PDF

Characteristic and Adhesive Strength Change by Heat Treatment of the Plasma Sprayed $ZrO_{2}$- Thermal Barrier Coatings(TBC) (플라즈마 용사된 $ZrO_{2}$-단열 코팅층의 특성 및 열처리에 따른 접합강도변화)

  • Kim, Byoung-Hee;Suhr, Dong-Soo
    • Korean Journal of Materials Research
    • /
    • v.8 no.6
    • /
    • pp.505-512
    • /
    • 1998
  • In this study, two-layer thermal barrier coatings composed of plasma sprayed 0.3mm $ZrO_2(8wt% Y_2o_3)$ ceramic coating layer and O.lmm $NiCrAlCoY_20_3$ bond coating layer on AISI 316 were investigated microstructure of the coating, oxidation of the metallic bond coating and adhesive strength to evaluate the durability of coating layer after cyclic and isothermal test at 90$0^{\circ}C$. And quantitative phase analysis of $ZrO_2(8wt% Y_2o_3)$ ceramic coating was performed as a function of thermal exposure time using XRD technique. The results showed that the amount of m - 2rO, phase in the coating was slightly increased with increasing thermal exposure time at 90$0^{\circ}C$. The c/a ratio of t' - $ZrO_2$ in the as-sprayed coating was 1.0099 and slightly increased to 1.0115 after 100 hours heat treatment. It was believed that $Y_2O_3$ in high yttria tetragonaJ(t') was transformed to low yttria tetragonaJ(t) by $Y_2O_3$ diffusion with increasing thermal exposure time. The adhesive strength was gradually decreased as thermal exposure time increased. After the isothermal test, the failure predominantly occured in ceramic coating layer. On the other hand. the specimens after cyclic thermal test were mostly failed at bond coating/ceramic coating interface. The failure was oeeured by decreasing the bond strength between bond coating and oxide scale which were formed by oxidation of the metallic elements within bond coating and by thermal stress due to thermal expansion mismatches between the oxide scale and ceramic coating.

  • PDF

The Effect of the Replacement of Grinded Fly Ash according to Curing Temperature on Repair Mortar Based on Polymer Admixture (폴리머수지 기반 보수모르타르에서 양생온도에 따른 미분쇄된 플라이애시 치환율의 영향)

  • Sim, Jae-Il;Mun, Ju-Hyun;Yun, In-Gu;Jeon, Young-Su
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.19 no.4
    • /
    • pp.116-124
    • /
    • 2015
  • The objective of this study is to evaluate the effects of the replacement levels of grinded fly-ash on the repaired mortar based on a polymer. The main parameters are the curing temperature and replacement levels of grinded fly-ash. The curing temperature and the replacement levels of grinded fly-ash are varied at $40^{\circ}C$, $20^{\circ}C$ and $5^{\circ}C$, and between 0% and 35% of the total binder by weight, respectively. The flow in fresh mortar and compressive strengths according to ages, the relationship of stress-strain, elastic modulus and modulus rupture in hardened mortar, as well as scanning the electron microscopy and the X-ray diffraction of mortar, were measured, respectively. The test results showed that the flow, elastic modulus and modulus rupture are great in mortar specimens with 20~30% of the replacement levels of grinded fly-ash. In addition, compressive strengths according to ages were affected by the replacement levels of grinded fly-ash and the curing temperature indicated that the strength development ratio of mortar with 20% of the replacement levels of grinded fly-ash was greater than others. In the prediction of the compressive strength specified by the ACI 209 code, the strength development at an early and late age can be generalized by the functions of the replacement levels of grinded fly-ash and the curing temperature. In the analysis of scanning the electron microscopy and the X-ray diffraction, the number and intensity of peaks increased and the form of CSH gels on the surface of the particle of grinded fly-ash was observed.