• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.4
• /
• pp.67-80
• /
• 1989

This Paper is concerned with the fracture behavoir of Unidirectional Laminate(UD) and the characteristic length of Multidirectional Laminate(MD) around hole under the Uniform Tensial Strain. Two fracture mechanical concepts of the Waddoups-Eisenman-Kaminski(WEK) model based on the Linear Elastic Fracture Mechanics(LEFM) and the Whitney-Nuismer Model based on Point and Average Stress Criteria were applied. The characteristic length of a laminate with a hole is then obtained using the coefficient of stress reduction and the experimental results, and it can be utilized in predicting the stress level at which the specimen will fracture. The results of the fracture characteristics and the strength of the specimens having a hole in the center can be used as the important experimental data in the research branch of the mechanical fastening of laminated structures. The Ultrasonic scanning and the Acoustic Emission(AE) method were utilized in order to find out the initial defects and the fracture behavior, respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.99-104
• /
• 2002

In this paper the influence or specimen length on flexural compressive strength and parameter or equivalent rectangular stress block of polymer concrete was evaluated. For this purpose, a series of C-shaped specimens subjected to eccentric compression were tested using four different length-to-depth ratios(from 1.0, 2.0, 3.0 and 4.0) of specimens with compressive strength of 1,020kgf/cm$^2$. Results indicate that for the region of h/c$\leq$3.0 the reduction in equivalent rectangular stress block depth and flexural compressive strength with increase of length-to-depth ratios was apparent but for the region of h/c$\geq$3.0 they were nearly constant. It means that for the region of h/c$\geq$3.0 effect of specimen length on equivalent rectangular stress block depth and flexural compressive strength was negligible. It was also founded that the effect of specimen length on v, a coefficient of strength, that was from 0.84 to 0.86 regardless of h/c was petty. Finally, predictive equation is, suggested by using modified law of effect of specimen length and results.

• Structural Engineering and Mechanics
• /
• v.62 no.5
• /
• pp.587-593
• /
• 2017

The objective of this analytical study is to calculate the elasto-plastic stresses of Functionally Graded (FG) hyperbolic disc subjected to uniform temperature. The material properties (elastic modulus, thermal expansion coefficient and yield strength) and the geometry (thickness) of the disc are assumed to vary radially with a power law function, but Poisson's ratio does not vary. FG disc material is assumed to be non-work hardening. Radial and tangential stresses are obtained for various thickness profile, temperature and material properties. The results indicate that thickness profile and volume fractions of constituent materials play very important role on the thermal stresses of the FG hyperbolic discs. It is seen that thermal stresses in a disc with variable thickness are lower than those with constant thickness at the same temperature. As a result of this, variations in the thickness profile increase the operation temperature. Moreover, thickness variation in the discs provides a significant weight reduction. A disc with lower rigidity at the inner surface according to the outer surface should be selected to obtain almost homogenous stress distribution and to increase resistance to temperature. So, discs, which have more rigid region at the outer surface, are more useful in terms of resistance to temperature.

• Journal of Korean Public Health Nursing
• /
• v.31 no.3
• /
• pp.518-527
• /
• 2017

Purpose: This study examined the relationship among stressful life events, mindfulness and depression, and explored the mediating role of mindfulness between stressful life events and depression in nursing students. Methods: A cross-sectional survey was undertaken. A sample of 120 nursing students participated in the study. The self-reported measures of stressful life events (revised life stress scale), depression (DASS-D) and mindfulness (MAAS) were adopted in April, 2017. The data were analyzed using descriptive statistics, frequency, Pearson correlation coefficient and multiple regression. Mediation analysis was performed using the Baron & Kenny method and Sobel test. Results: The mean scores of stressful life events, mindfulness and depression were 39.50, 77.03, and 8.18, respectively. Higher levels of stressful life events were associated with lower mindfulness (r = -46, p < .001) and higher depression (r = -44, p < .001), and mindfulness was negatively associated with depression (r = -72, p < .001). Mindfulness showed full mediation in the relationship between stressful life events and depression. Conclusion: Stressful life events influenced the nursing students' depression via the full mediating effect of mindfulness. Promoting mindfulness plays an important role in reducing depression in nursing students. Therefore, it is important to develop a mindfulness program or use a mindfulness-based stress reduction program (MBSR) for nursing students.

• Tribology and Lubricants
• /
• v.35 no.4
• /
• pp.237-243
• /
• 2019

Through this study, we investigate the effects of ultrasonic nanocrystal surface modification (UNSM) technology on the fatigue life of needle roller bearings. The fatigue life of untreated and UNSM-treated needle roller bearings is evaluated using a roller fatigue tester at various contact stress levels under oil-lubricated conditions. We can ascertain that the fatigue life of an UNSM-treated needle roller bearing was extended by approximately 34.3% in comparison with an untreated one, where the effectiveness of UNSM technology diminishes with increasing contact stress. The surface roughness and surface hardness of needle roller bearings before and after being treated by UNSM technology are compared and discussed to understand the role of UNSM technology in improving the fatigue life of needle roller bearings. In addition, a fractograph of the damaged bearings is observed using a scanning electron microscopy to shed light on the fracture mechanisms of bearings under different contact stress levels. We can therefore conclude that the application of UNSM technology to the needle roller bearings improves the fatigue life by reducing the friction coefficient and increasing the wear resistance; this may be attributed to a reduction in surface roughness from 0.5 to $0.149{\mu}m$ and an increase in surface hardness from 58 to 62 HRc.

• Geomechanics and Engineering
• /
• v.24 no.6
• /
• pp.531-543
• /
• 2021

Freezing and thawing of pore water within backfill can affect the stability of retaining wall as the phase change of pore water causes changes in the mechanical characteristics of backfill material. In this study, the effects of freezing and thawing on the mechanical performance of retaining wall with granular backfill were investigated for various temperature and groundwater level (GWL) conditions. The thermal and mechanical finite element analyses were performed by assigning the coefficient of lateral earth pressure according to phase change of soil for at-rest, active and passive stress states. For the at-rest condition, the mobilized lateral stress and overturning moment changed markedly during freezing and thawing. Active-state displacements for the thawed condition were larger than for the unfrozen condition whereas the effect of freezing and thawing was small for the passive condition. GWL affected significantly the lateral force and overturning moment (Mo) acting on the wall during freezing and thawing, indicating that the reduction of safety margin and wall collapse due to freezing and thawing can occur in sudden, unexpected patterns. The beneficial effect of an insulation layer between the retaining wall and the backfill in reducing the heat conduction from the wall face was also investigated and presented.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.321-337
• /
• 2000

Dental caries, one of the most frequent dental disease, become larger because it can be thought as a simple disease. Further more, it can progress to unexpected root canal therapy with fabrication of crown that needs reduction of tooth structure. Base is required in a large caries and ZOE, ZPC, glass ionomer are used frequently as base material. They, with restorative material, can affect the longevity of the restoration. In this study, we assume that the mandibular 1st molar has deep class I cavity. So, installing the 3 base material, 3 kinds of fillings were restored over the base as follows; 1) amalgam only, 2) amalgam with ZPC, 3) amalgam with ZOE, 4) amalgam with GI cement, 5) gold inlay with ZPC, 6) gold inlay with GI cement, 7) composite resin only, 8) composite resin with GI cement. After develop the 3-dimensional model for finite element analysis, we observe the distribution of stress and temperature with force of 500N to apical direction at 3 point on occlusal surface and temperature of 55 degree, 15 degree on entire surface. The analyzed results were as follow : 1. Principal stress produced at the interface of base, dentin, cavity wall was smallest in case of using GI cement as base material under the amalgam. 2. Principal stress produced at the interface of base, dentin, cavity wall was smaller in case of using GI cement as a base material than ZPC under gold inlay. 3. Composite resin-filled tooth showed stress distributed over entire tooth structure. In other words, there was little concentration of stress. 4. ZOE was the most effective base material against hot stimuli under the amalgam and GI cement was the next. In case of gold inlay, GI cement was more effective than ZPC. 5. Composite resin has the small coefficient of thermal conductivity. So, composite resin filling is the most effective insulating material.

• Journal of Digital Convergence
• /
• v.18 no.9
• /
• pp.285-295
• /
• 2020

The purpose of this study was to identify factors affecting college-based stress and develop stress-relieving educational programs. Data were collected from 169 students in G-province, from June 15th to july 15th, 2020. Analysis was done using IBM SPSS 21.0 for frequency, percentage, average, standard deviation, t-test, ANOVA, Pearson correlation coefficient, and Multiple regression. College-based stress positively correlated with life event, life event importance, interpersonal emotion, and self-control. The most important factor affecting college-based stress was psychological hardiness (β=-.323, p<.001), followed by club activities (β=.237, p<.001), interpersonal conflict (β=.215, p=.001), grade-2 (β=-.203, p=.001), department adaptation (β=.161, p=.010), and age-21 (β=-.149, p=.024). The explanatory power was 44.4% (F=42.43, p<.001). The results of this study are expected to be used as basic data for the development of educational programs for stress reduction at the university level. Therefore, educational programs considering age and grade, using club activities as support systems, and dealing with psychological hardiness and department adaptation are needed.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.5
• /
• pp.797-804
• /
• 2015

Objectives: The purpose of the study was to investigate the influence of organizational communication satisfaction on the job satisfaction, organizational commitment, and turnover intention in the dental hygienists. Methods: A self-reported questionnaire was completed by 227 dental hygienists in Chungnam. The questionnaire consisted of 4 questions of general characteristics of the subjects, 8 questions of interpersonal stress, 12 questions of organizational communication satisfaction, 5 questions of job satisfaction, 5 questions of organizational commitment, and 5 questions of turnover intention. The four variables were measured by Likert 7 point scale. Data were analyzed using SPSS version 18.0 for frequency analysis, t test, one way ANOVA, Pearson's correlation coefficient, and stepwise regression analysis. Sobel test was used to verify the mediating effects. Results: The interpersonal stress was proportional to turnover intention and inversely proportional to the organizational communication satisfaction, job satisfaction, and organizational commitment(p<0.01). The organizational communication satisfaction was proportional to the job satisfaction and organizational commitment, and inversely proportional to turnover intention(p<0.01). The interpersonal stress had a meditating effect between organizational communication satisfaction, and job satisfaction. It also gave the mediating effect between organizational communication satisfaction and organizational commitment. Conclusions: The effective organization management system can enhance the job satisfaction, organizational commitment, and turnover intention reduction in the dental hygienists.

• Science of Emotion and Sensibility
• /
• v.16 no.1
• /
• pp.75-84
• /
• 2013

The underlying changes in biological processes that are associated with reported changes in mental and physical health in response to yoga breathing ($pr{\bar{a}}n{\bar{a}}y{\bar{a}}ma$) have not been systematically explored yet. In this study, the effects of a yoga breathing program on prefrontal EEG were tested with middle-aged women. Participants were collected as volunteers and controlled into two groups. Two channel EEG was recorded in the prefrontal region (Fp1, Fp2) from the yoga breathing group (n=17) and control group (n=17). QEEG quotients were transformed from the EEGs and analyzed by the ANOVAs on gain scores. As a result, ${\alpha}/{\delta}$ (left, right) and CQ (correlation quotient) for yoga breathing participants were significantly decreased compared to control group (p<.05). ${\alpha}/{\beta}_H+{\alpha}/{\delta}$ (left, right) were increased significantly (p<.05). For those significantly changed QEEG quotients, the interaction effects of Group x prefrontal alpha (${\alpha}$) and beta (${\beta}$) asymmetry were tested. Only the ${\alpha}$ asymmetry showed main effect on the gain score of ${\alpha}/{\beta}_H+{\alpha}/{\delta}$ (right) with F (1, 34)＝5.694 (p<.05). Pearson's correlation coefficient between ${\alpha}$ asymmetry and gain score of ${\alpha}/{\beta}_H+{\alpha}/{\delta}$ (right) was .374 (p<.05). The gain score of ${\alpha}/{\beta}_H+{\alpha}/{\delta}$ (right) was increased for the right ${\alpha}$ dominance of yoga breathing group. On the contrary it was decreased for the left ${\alpha}$ dominance of yoga breathing group as well as the control regardless of the dominance. The result of this study implies that yoga breathing increases stress resistance and is effective in the management of physical stress. Emotionally relaxed people may have greater instantaneous stress reduction after yoga breathing. Moreover, yoga breathing could be also beneficial for depressed who may be more vulnerable to stress.