Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Elasto-plastic thermal stress analysis of functionally graded hyperbolic discs

  • Demir, Ersin (Department of Mechatronics Engineering, Pamukkale University) ;
  • Callioglu, Hasan (Department of Mechatronics Engineering, Pamukkale University) ;
  • Sayer, Metin (Department of Mechatronics Engineering, Pamukkale University)
  • Received : 2016.02.12
  • Accepted : 2017.02.10
  • Published : 2017.06.10
⟨ Previous Next ⟩

Abstract

The objective of this analytical study is to calculate the elasto-plastic stresses of Functionally Graded (FG) hyperbolic disc subjected to uniform temperature. The material properties (elastic modulus, thermal expansion coefficient and yield strength) and the geometry (thickness) of the disc are assumed to vary radially with a power law function, but Poisson's ratio does not vary. FG disc material is assumed to be non-work hardening. Radial and tangential stresses are obtained for various thickness profile, temperature and material properties. The results indicate that thickness profile and volume fractions of constituent materials play very important role on the thermal stresses of the FG hyperbolic discs. It is seen that thermal stresses in a disc with variable thickness are lower than those with constant thickness at the same temperature. As a result of this, variations in the thickness profile increase the operation temperature. Moreover, thickness variation in the discs provides a significant weight reduction. A disc with lower rigidity at the inner surface according to the outer surface should be selected to obtain almost homogenous stress distribution and to increase resistance to temperature. So, discs, which have more rigid region at the outer surface, are more useful in terms of resistance to temperature.

Keywords

References

  1. Alexandrova, N.N. and Vila Real, P.M.M. (2007), "Elastic-plastic stress distributions and limit angular velocities in rotating hyperbolic annular discs", Proceedings of the Institution of Mechanical Engineers, Part C: J. Mech. Eng. Sci., 221(2), 137-142. https://doi.org/10.1243/0954406JMES325
  2. Bayat, M., Saleem, M., Sahari, B.B., Hamouda, A.M.S. and Mahdi, E. (2008), "Analysis of functionally graded rotating discs with variable thickness", Mech. Res. Commun., 35(5), 283-309. https://doi.org/10.1016/j.mechrescom.2008.02.007
  3. Chiba, R. (2009), "Stochastic heat conduction analysis of a functionally graded annular disc with spatially random heat transfer coefficients", Appl. Math. Model, 33(1), 507-523. https://doi.org/10.1016/j.apm.2007.11.014
  4. Callioglu, H. (2011), "Stress analysis in a functionally graded disc under mechanical loads and a steady state temperature distribution", Sadhana Indian Acad. Sci., 36(1), 53-64.
  5. Callioglu, H., Sayer, M. and Demir, E. (2015), "Elastic-plastic stress analysis of rotating functionally graded discs", Thin Wall. Struct., 94, 38-44. https://doi.org/10.1016/j.tws.2015.03.016
  6. Callioglu, H., Sayer, M. and Demir, E. (2011), "Stress analysis of functionally graded discs under mechanical and thermal loads", Indian J. Eng. Mater. S., 18, 111-118.
  7. Damircheli, M. and Azadi, M. (2011), "Temperature and thickness effects on thermal and mechanical stresses of rotating FG-disks", J. Mech. Sci. Technol., 25(3), 827-836. https://doi.org/10.1007/s12206-011-0110-z
  8. Erdogan, F. (1995), "Fracture mechanics of functionally graded materials", Compos. Eng., 5(7), 753-770. https://doi.org/10.1016/0961-9526(95)00029-M
  9. Garg, M., Salaria, B.S. and Gupta, V.K. (2015), "Modeling creep in a variable thickness rotating FGM disc under varying thermal gradient", Eng. Comput., 32(5), 1230-1250. https://doi.org/10.1108/EC-02-2014-0028
  10. Kar, A. and Kanoria, M. (2007), "Thermoelastic interaction with energy dissipation in a transversely isotropic thin circular disc", Eur. J. Mech. A-Solid., 26(6), 969-981. https://doi.org/10.1016/j.euromechsol.2007.03.001
  11. Khanna, K., Gupta, V.K. and Nigam, S.P. (2015), "Creep analysis of a variable thickness rotating fgm disc using tresca criterion", Defence. Sci. J., 65(2), 163-170. https://doi.org/10.14429/dsj.65.8045
  12. Kordkheili, S.A.H. and Naghdabadi, R. (2007), "Thermoelastic analysis of a functionally graded rotating disk", Compos. Struct., 79(4), 508-516. https://doi.org/10.1016/j.compstruct.2006.02.010
  13. Liew, K.M, Kitipornchai, S., Zhang, X.Z. and Lim, C.W. (2003), "Analysis of the thermal stress behaviour of functionally graded hollow circular cylinders", Int. J. Solids Struct., 40(10), 2355- 2380. https://doi.org/10.1016/S0020-7683(03)00061-1
  14. Mohammadi, M. (2015), "Axisymmetric and one-dimensional thermoelastic fields of radially graded bodies", J. Therm. Stresses., 38(7), 716-732. https://doi.org/10.1080/01495739.2015.1039927
  15. Mohammadi, M. and Dryden, J.R. (2008), "Thermal stress in a nonhomogeneous curved beam", J. Therm. Stresses., 31(7), 587-598. https://doi.org/10.1080/01495730801978471
  16. Nie, G.J. and Batra, R.C. (2010), "Stress analysis and material tailoring in isotropic linear thermoelastic incompressible functionally graded rotating disks of variable thickness", Compos. Struct., 92(3), 720-729. https://doi.org/10.1016/j.compstruct.2009.08.052
  17. Owen, D.R.J. and Hinton, E. (1986), Finite elements in plasticity, Pineridge Pres, Swansea, UK.
  18. Pindera, M.J., Aboudi, J., Glaeser, A.M. and Arnold, S.M. (1997), "Use of composites in multi- phased and functionally graded materials", Special issue of Compos.: Part B-Eng., 28B, (1/2).
  19. Reddy, T.Y. and Srinath, H. (1974), "Effect of acceleration stresses on the yielding of rotating disks", Int. J. Mech. Sci., 16(8), 593-596. https://doi.org/10.1016/0020-7403(74)90025-3
  20. Timoshenko, S. and Goodier, J.N. (1970), Theory of Elasticity, (3rd Edition), McGraw Hill, California, USA.
  21. Wang, Y.C., Alexandrov, S. and Jeng, Y.R. (2013), "Effects of thickness variations on the thermal elastoplastic behavior of annular discs", Struct. Eng. Mech., 47(6), 839-856. https://doi.org/10.12989/sem.2013.47.6.839
  22. You, L.H., You, X.Y., Zhang, J.J. and Li, J. (2007), "On rotating circular disks with varying material properties", Zeitschrift fur Angewandte Mathematik und Physik (ZAMP), 58(6), 1068-1084. https://doi.org/10.1007/s00033-007-5094-2
  23. Zenkour, A.M. (2005), "Analytical solutions for rotating exponentially-graded annular disks various boundary conditions", Int. J. Struct. Stab. D., 5(4), 557-577. https://doi.org/10.1142/S0219455405001726