• Tunnel and Underground Space
• /
• v.33 no.1
• /
• pp.57-69
• /
• 2023

In this study, we simulated induced seismicity in the Groningen natural gas reservoir using 2D hydro-mechanical coupled discrete element modelling (DEM). The code used is PFC2D (Particle Flow Code 2D), a commercial software developed by Itasca, and in order to apply to this study we further developed 1)initialization of inhomogeneous reservoir pressure distribution, 2)a non-linear pressure-time history boundary condition, 3)local stress field monitoring logic. We generated a 2D reservoir model with a size of 40 × 50 km² and a complex fault system, and simulated years of pressure depletion with a time range between 1960 and 2020. We simulated fault system failure induced by pressure depletion and reproduced the spatiotemporal distribution of induced seismicity and assessed its failure mechanism. Also, we estimated the ground subsidence distribution and confirmed its similarity to the field measurements in the Groningen region. Through this study, we confirm the feasibility of the presented 2D hydro-mechanical coupled DEM in simulating the deformation of a complex fault system by hydro-mechanical coupled processes.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.36 no.6
• /
• pp.209-212
• /
• 2022

We recently reported that Gastrodia elata extracts (GEE) had an effects to protect against lipopolysaccharide-induced cognitive impairment in vivo model. In this study, we investigated the neuroprotective effects and the mechanism of action of GEE in hydrogen peroxide (H₂O₂)-induced cell death of SH-SY5Y human neuroblastoma cell. The SH-SY5Y cells were divided into five groups, including control(non-treated group), 100 μM H₂O₂, 100, 200, 500 ㎍/㎖ GEE+ 100 μM H₂O₂ groups. Pre- and co-treatment with GEE prevented cell death induced by 100 μM H₂O₂ for 24 h in SH-SY5Y cells. Our findings also showed that anti-oxidants enzymes (Cu/Zn superoxide dismutase, Mn superoxide dismutase, catalase) were up-regulated by 100 μM H₂O₂. But GEE suppressed H₂O₂-induced anti-oxidants enzymes decrease in a dose-dependent manner. Treatment with GEE also inhibited phosphorylation of eukaryotic initiation factor-2α (eIF-2α) and p38 by H₂O₂. Taken together, the neuroprotective effects of GEE in terms of recovery of antioxidant enzymes expression, down-regulation of eIF-2α and p38 phosphorylation, and inhibition of cell death are associated with reduced oxidative stress in SH-SY5Y cells.

• Journal of Life Science
• /
• v.33 no.5
• /
• pp.429-435
• /
• 2023

Epidemiological studies suggest that maternal infection, maternal stress, and environmental risk factors during pregnancy increase the risk of brain development abnormalities associated with cognitive impairment in the offspring and increase susceptibility to schizophrenia and autism spectrum disorder. Several animal models have demonstrated that maternal immune activation (MIA) is sufficient to induce abnormal brain development and behavioral defects in the fetus. When polyinosine:polycytodylic acid (poly I:C) or lipopolysaccharide (LPS), which is commonly used in maternal immune activation animal models, was introduced into a pregnant dam, an increase in pro-inflammatory cytokines and microglial activity was observed in the offspring's brain. Microglia are brain-resident immune cells that play a mediating role in the central nervous system, and they are responsible for various functions, such as phagocytosis, synapse formation and branching, and angiogenesis. Several studies have reported that microglia are activated in MIA offspring and influence offspring behavior through interactions with various cytokines. In addition, it has been reported that they play an important role in brain circuits through interactions with neurons and astrocytes. However, there is controversy concerning whether microglia are essential to brain development or lead to behavioral defects, and the exact mechanism remains unknown. Therefore, for the potential diagnosis and treatment of brain developmental disorders, a functional study of microglia should be conducted using MIA animal models.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.4
• /
• pp.185-194
• /
• 2019

The purpose of this study is to examine the effects of short-term foresters on brain waves and pulse waves. For this purpose, 484 foresters who visited the natural recreation forest located in Cheongpyeong city, Gyeonggi province, measured the before and after experiences of EEG and pulse waves, and the following results were obtained. First, foresters have been shown to be effective on concentration, brain activity, and brain stress. Second, foresters had positive effects on cardiac health and autonomic health. In other words, when various substances released from the forest come into the body through the respiratory system, it firstly affects the heart activity positively, and it seems to be able to expect various improvements by acting on the emotional side of the brain. Therefore, based on the scientific basis of the forest experience, it is expected that the experience of forests will be widely used as a guide for healthy life by creating conditions for participation by many people. In addition, the mechanism of respiration, heartbeat, and brain interaction is also possible, and various experimental studies on the forest experience in the future are important.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.7
• /
• pp.25-36
• /
• 2008

The plane strain test can reproduce the real field condition and failure behavior precisely over other laboratory shear tests. Accordingly, this test has been utilized to investigate the shearing behaviors associated with overall failure behavior and local deformation of soils. However, most plane strain tests have been carried out with restrained end plates due to difficulties in manufacturing the equipment and also performing it. This restraint induces different results with real field because of shear stress on end plates. In this study, plane strain tests with/without bottom plate restraint were performed on Jumunjin-sand. The measurement of overall and local deformation was accomplished by digital image correlation technique as well as external LVDT. By applying digital image correlation method using two consecutive images captured through the transparent wall, local deformation behavior of various parts inside the specimen was estimated. And the formation and development of shear band caused by the restrained effect of end plate and the deformation mechanism of sand under plane strain condition were examined.

• Journal of Life Science
• /
• v.33 no.4
• /
• pp.343-348
• /
• 2023

Acne is one of the most common skin diseases, mainly occurring in adolescence. The pathophysiology of acne involves not only hormonal, genetic and environmental factors, but also other factors including hyperseborrhea, inflammation, over-keratinization of follicular keratinocytes and overgrowth of Cutibacterium acnes (C. acnes). Cannabidiol (CBD) is known to relieve pain, stress and inflammation. Moreover, cannabis extracts containing CBD have been reported to be effective in treating acne. However, the therapeutic effect of CBD on acne remains unclear. Therefore, this study aimed to investigate the effect and mechanism of CBD on lipogenesis in SEB-1 sebocytes. We treated sebocytes with CBD and found that it not only inhibited lipid synthesis, but also inhibited cell proliferation by inducing apoptosis. We then demonstrated that sterol response element-binding protein-1 (SREBP-1) mediates the inhibitory effect of CBD on lipogenesis. Furthermore, Akt and adenosine monophosphate-activated protein kinase (AMPK), upstream regulators of SREBP-1, were regulated by CBD treatment. Taken together, our studies demonstrate that CBD inhibits adipogenesis by regulating the Akt/AMPK-SREBP-1 signaling pathway, providing potential for use as a therapeutic agent for acne. Further research is needed to confirm the effect of CBD on inflammation caused by hyperkeratosis, which will increase the possibility of using CBD for acne treatment.

• Nuclear Engineering and Technology
• /
• v.17 no.3
• /
• pp.211-215
• /
• 1985

The effects of temperature and strain rate on the I-SCC behaviors of Zircaloy-4 were investigated by constant load test at 30$0^{\circ}C$ and constant elongation rate test at 300, 350 and 40$0^{\circ}C$ in 3.34mg $I_2$/㎤. The results showed that I-SCC susceptibility increased as the strain rate decreased or the temperature increased. The empirical relation between the stress and the time to failure at 30$0^{\circ}C$ was given by 1/ $t_{f}$∝exp (0.3$\sigma$/$\sigma$$_{UTS}$-31.5) When the I-SCC susceptibility was expressed by the ratio of fracture energy in iodine atmosphere to that in the inert atmosphere, severe I-SCC susceptibility was found near 7.6$\times$10$^{-6}$ sec at 30$0^{\circ}C$ and the maximum point of I-SCC susceptibility tended to shift to the higher strain rate with increasing the temperature. The quasi-cleavage fracture was observed in I-SCC fracture surface. From these results, it was certain that the film repture step was involved as an important process in the I-SCC mechanism of Zircaloy-4.4.

• Structural Engineering and Mechanics
• /
• v.81 no.2
• /
• pp.243-258
• /
• 2022

In this paper, tensile behavior of joint filling has been investigated under experimental test and numerical simulation (particle flow code). Two concrete slabs containing semi cylinder hole were prepared. These slabs were attached to each other by glue and one cubic specimen with dimension of 19 cm×15 cm×6 cm was prepared. This sample placed in the universal testing machine where the direct tensile stress can be applied to this specimen by implementing a special type of load transferring device which converts the applied compressive load to that of the tensile during the test. In the present work, two different joint filling thickness i.e., 3 mm and 6 mm were prepared and tested in the laboratory to measure their direct tensile strengths. Concurrent with experimental test, numerical simulation was performed to investigate the effect of hole diameter, length of edge notch, filling thickness and filling length on the tensile behavior of joint filling. Model dimension was 19 cm×15 cm. hole diameter was change in four different values of 2.5 cm, 5 cm, 7.5 cm and 10 cm. glue lengths were different based on the hole diameter, i.e., 12.5 cm for hole diameter of 2.5 cm, 10 cm for hole diameter of 5 cm, 7.5 cm for hole diameter of 7.5 cm and 5 cm for hole diameter of 10 cm. length of edge notch were changed in three different value i.e., 10%, 30% and 50% of glue length. Filling thickness were changed in three different value of 3 mm, 6 mm and 9 mm. Tensile strengths of glue and concrete were 2.37 MPa and 6.4 MPa, respectively. The load was applied at a constant rate of 1 kg/s. Results shows that hole diameter, length of edge notch, filling thickness and filling length have important effect on the tensile behavior of joint filling. In fixed glue thinks and fixed joint length, the tensile strength was decreased by increasing the hole diameter. Comparing the results showed that the strength, failure mechanism and fracture patterns obtained numerically and experimentally were similar for both cases.

• Biomolecules & Therapeutics
• /
• v.31 no.4
• /
• pp.446-455
• /
• 2023

The mechanistic functions of 3-deoxysappanchalcone (3-DSC), a chalcone compound known to have many pharmacological effects on lung cancer, have not yet been elucidated. In this study, we identified the comprehensive anti-cancer mechanism of 3-DSC, which targets EGFR and MET kinase in drug-resistant lung cancer cells. 3-DSC directly targets both EGFR and MET, thereby inhibiting the growth of drug-resistant lung cancer cells. Mechanistically, 3-DSC induced cell cycle arrest by modulating cell cycle regulatory proteins, including cyclin B1, cdc2, and p27. In addition, concomitant EGFR downstream signaling proteins such as MET, AKT, and ERK were affected by 3-DSC and contributed to the inhibition of cancer cell growth. Furthermore, our results show that 3-DSC increased redox homeostasis disruption, ER stress, mitochondrial depolarization, and caspase activation in gefitinib-resistant lung cancer cells, thereby abrogating cancer cell growth. 3-DSC induced apoptotic cell death which is regulated by Mcl-1, Bax, Apaf-1, and PARP in gefitinib-resistant lung cancer cells. 3-DSC also initiated the activation of caspases, and the pan-caspase inhibitor, Z-VAD-FMK, abrogated 3-DSC induced-apoptosis in lung cancer cells. These data imply that 3-DSC mainly increased mitochondria-associated intrinsic apoptosis in lung cancer cells to reduce lung cancer cell growth. Overall, 3-DSC inhibited the growth of drug-resistant lung cancer cells by simultaneously targeting EGFR and MET, which exerted anti-cancer effects through cell cycle arrest, mitochondrial homeostasis collapse, and increased ROS generation, eventually triggering anti-cancer mechanisms. 3-DSC could potentially be used as an effective anti-cancer strategy to overcome EGFR and MET target drug-resistant lung cancer.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.293-300
• /
• 2023

The Shape Preferred Orientation (SPO) method has been used to analyze the orientation of fault motion, which is utilized as basic data for fault kinematics studies. The rigid grains, which as quartz, feldspar, and rock fragments, in the fault gouge are arranged in the P-shear direction through rigid body rotation by a given shear stress. Using this characteristic, the fault motion can be estimated from the SPO inversely. Recently, a method for securing precision and reliability by measuring 3D-SPO using X-ray CT images and examining the shape of a large number of particles in a short time has been developed. As a result, the SPO method analyzes the orientation of thousands to tens of thousands of particles at high speed, suggests the direction of fault motion, and provides easy accessibility and reliable data. In addition, the shape information and orientation distribution data of particles, which are by-products obtained in the SPO analysis process, are expected to be used as basic data for conducting various studies such as the local deformation of fault rocks and the fault generation mechanism.