• 한국안전학회지
• /
• 제29권4호
• /
• pp.34-41
• /
• 2014

The goal of this study is to investigate some crack behaviors which affect the crack propagation angle at the planar solid oxide fuel cell with cracks under the fabricating and operating temperature and analyze the stresses by 3 steps processing on the solid oxide fuel cell. Currently, there are lots of researches of the performance improvement for fuel cells, and also for the more powerful efficiency. However, the planar solid oxide fuel cell has demerits which the electrode materials have much brittle properties and the thermal condition during the operating process. It brings some problems which have lower reliability owing to the deformation and cracks from the thermal expansion differences between the electrolyte, cathode and anode electrodes. Especially the crack in the corner of the electrodes gives rise to the fracture and deterioration of the fuel cells. Thus it is important to evaluate the behavior of the cracks in the solid oxide fuel cell for the performance and safety operation. From the results, we showed the stress distributions from the cathode to the anode and the effects of the edge crack in the electrolyte and the slant crack in the anode. Futhermore the crack propagation angle was expected according to the crack length and slant angle and the variation of the stress intensity factors for the each fracture mode was shown.

• Composites Research
• /
• 제19권4호
• /
• pp.15-22
• /
• 2006

구조물 설계에 복합재료-금속 접착제 결합 조인트의 개발 및 사용을 제한하는 가장 큰 요인은 접착 조인트의 하중지지 능력 예측을 위한 접착 계면의 강도 평가 방법의 부재이다. 본 연구에서는 복합재료-탄소강의 접착 강도를 계면 모서리에서의 응력강도계수와 파괴 인성 값으로 평가하였다. 구체적으로 동시 경화 성형법으로 제작된 복합재료-탄소강 양면 겹치기 접착조인트의 하중지지 능력을 파괴 역학적 분석 방법을 통하여 결정하였다. 이종재료 계면 모서리 첨단의 응력 특이성과 그 지수를 제시하고 최종적으로 응력강도계수와 실험을 통한 계면의 파괴인성 값을 획득하였다. 서로 다른 접합 길이를 갖는 조인트의 하중지지 능력 비교를 통하여 양면 겹치기 접착 조인트의 파괴 인성치와 혼합 모드에서의 균열 진전 기준을 $K_1-K_{11}$ 평면 내에 도시하였다.

• 한국생활과학회지
• /
• 제9권3호
• /
• pp.271-281
• /
• 2000

The purpose of this study was to explore the effect of maternal perception of children's temperament on parenting stress. The subjects of this study were 303 mothers of four to six-year-old. Evaluations of Parent and Teacher temperament questionnaire for Children 3-7 years of age(Tomas, Chess, & Kom, 1977)(korean version) was used to measure children's temperament, and PDH(Parenting Daily Hassles) was used to measure maternal perception of parenting stress. Data were analyzed by descriptive analysis, t-test, ANOVA, Peasons's Correlation and multiple regression analysis and Duncan test for post test by SPSS WIN program. The results of this study were as follows; First, the average level of maternal perception of children's temperament was the highest in the category of adaptability and the lowest in the category of threshold of responsiveness. Second, maternal perception of children's temperament was significantly different according to children's sex. Boys were perceived higher than girls for the category of activity level. Third, the degree of daily hassles was explained by adaptability, the quality of mood, and activity level relatively, while the intensity of parenting stress could be predicted orderly by adaptability, threshold of responsiveness, attention span & persistence, regularity, and activity level. Fourth, mother's daily hassles was explained 22% valiance by children's temperament such as adaptability, the quality of mood, and activity level. Future research should be done to identify the interaction of temperamental factors.

• Journal of Welding and Joining
• /
• 제29권2호
• /
• pp.34-39
• /
• 2011

Nickel-based austenitic alloys such as Alloy 82 and 182 had been employed as the weld metals in nuclear power plants (NPPs) due to their high corrosion resistance as well as good mechanical properties. However, since the 2000s, the occurrence of primary water stress corrosion cracking has been reported in conjunction with these alloys in domestic and oversea NPPs. In the present work, we assumed an imaginary crack at the inner surface of a surge nozzle weld that had previously experienced the outside repair welding, and constructed its finite element model. Finite element analysis was performed with respect to the heat transfer, and then to the residual stress for obtaining the total applied stress distributions. These stress distributions were finally converted to the stress intensity factors for estimating crack growth rate. From the comparison of crack growth rate curves for the cases of no repair welding and outside repair welding, it was found that the outside repair welding did not exhibit negative effect on the crack growth for the surge nozzle under consideration in this work; in both cases, the cracks stopped growing before they became the through-wall cracks.

• Journal of Mechanical Science and Technology
• /
• 제18권9호
• /
• pp.1500-1511
• /
• 2004

In this paper, the anti-plane transient response of a central crack normal to the interface between a piezoelectric ceramics and two same elastic materials is considered. The assumed crack surfaces are permeable. By virtue of integral transform methods, the electro elastic mixed boundary problems are formulated as two set of dual integral equations, which, in turn, are reduced to a Fredholm integral equation of the second kind in the Laplace transform domain. Time domain solutions are obtained by inverting Laplace domain solutions using a numerical scheme. Numerical values on the quasi-static stress intensity factor and the dynamic energy release rate are presented to show the dependences upon the geometry, material combination, electromechanical coupling coefficient and electric field.

• Journal of Mechanical Science and Technology
• /
• 제18권3호
• /
• pp.419-431
• /
• 2004

The dynamic response of a cracked functionally graded piezoelectric material (FGPM) under transient anti-plane shear mechanical and in-plane electrical loads is investigated in the present paper. It is assumed that the electroelastic material properties of the FGPM vary smoothly in the form of an exponential function along the thickness of the strip. The analysis is conducted on the basis of the unified (or natural) crack boundary condition which is related to the ellipsoidal crack parameters. By using the Laplace and Fourier transforms, the problem is reduced to the solutions of Fredholm integral equations of the second kind. Numerical results for the stress intensity factor and crack sliding displacement are presented to show the influences of the elliptic crack parameters, the electric field, FGPM gradation, crack length, and electromechanical coupling coefficient.

• Journal of Mechanical Science and Technology
• /
• 제15권1호
• /
• pp.21-25
• /
• 2001

We consider the problem of determining the singular stresses and electric fields in a piezoelectric ceramic strip containing a Griffith eccentric crack off the center line under anti-plane shear loading with the theory of linear piezoelectricity. Fourier transforms are used to reduce the problem to the solution of two pairs of dual integral equations, which are then expressed to a Fredholm integral equation of the second kind. Numerical values on the stress intensity factor and the energy release rate are obtained, and the influences of the electric fields for piezoelectric ceramics are discussed.

• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.1999-2010
• /
• 1992

본 연구에서는 (1)의 방법의 문제점.즉, 두꺼운 판에 강체 균열을 열매립하는 과정에서 균열 첨단에 열변형이 일어나, 변위측정시 측정 오차가 발생하는 점을 해결 하기 위해, 매유 얇은 P.V.C.판(t=0.15mm)에 강체 균열을 열매립 하는 대신 접착제로 부착하는 방법을 채택하여 강체균열 경계상의 곡률 영향을 검토하였으며, (2)의 방법 의 해결책으로서, 강체균열에서 충분히 먼곳의 곡률은 얇은 합금공구강판(alloy tool steel plate`t=1mm)으로 제작한 프레임(Frame)으로 원방곡률을 미리 슬랩 경계조건과 일치하도록 하였고, 또한 변위도 고정(동결)할수있는 새로운 고정 하중장치를 개발하 여 실험 측정치의 정도를 높였다.

• 한국해양바이오학회지
• /
• 제6권1호
• /
• pp.31-40
• /
• 2014

The production of astaxanthin in the microalga Haematococcus pluvialis has been investigated using a sequential methodology based on the application of two types of statistical designs. The employed preliminary experiment was a fractional factorial design $2^6$ in which the factors studied were: excessive irradiance and nitrate starvation, phosphate deficiency, acetate supplementation, salt stress, and elevated temperature. The experimental results indicate that the amount of astaxanthin accumulation in the cells can be enhanced by excessive irradiance and nitrate starvation whereas the other factors tested did not yield any enhancement. In the subsequent experiment, a central composite design was applied with four variables, light intensity, nitrate, phosphate, and acetate, at five levels each. The optimal conditions for the highest astaxanthin production were found to be $1040{\mu}E/(m^2{\cdot}s)$ light intensity, 0.04 g/L nitrate, 0.31 g/L phosphate, 0.05 g/L acetate concentration.

• 대한토목학회논문집
• /
• 제14권6호
• /
• pp.1289-1298
• /
• 1994

휨거동을 받는 두꺼운 균열판의 응력확대계수를 산정할 수 있는 새로운 p-version 균열모델이 제시되었다. 제안된 모델에서는 고차이론과 전단변형을 고려할 수 있는 $C^{\circ}$-평판요소가 사용되었다. 임의의 변위장은 적분형 르장드르 다항식에 의해 정의되는데 이 다항식은 기본 모우드, 주변 모우드와 내부 모우드으로 구성되어 있다. 컴퓨터 프로그램에는 최고 10차까지의 적분형 르장드르 함수를 자유스럽게 사용할 수 있게 하였으며 응력확대계수는 가상균열전진법에 의해 계산되었다. 본 연구에서는 평판의 두께와 폭에 대한 균열진전길이의 변화와 경계조건의 변화에 따른 응력확대계수의 영향이 조사되었으며 모멘트 하중을 재하받는 균열판과 균열이 없는 평판의 해석이 기존의 문헌에 발표된 이론값과 유한요소해석 결과와 비교되어 높은 정확도를 보여주고 있다.