• Journal of Welding and Joining
• /
• 제17권4호
• /
• pp.69-75
• /
• 1999

Spot welding has been used in the sheet metal joining processes because of its high productivity and convenience. In this study, predicting methods of fatigue life of spot welded joint have been investigated and fatigue and static tests were conducted with the peel-tension specimens using cold rolled steel plate(SPCC). Fatigue life of peel-tension spot welded joint was influenced by tail effect. Fatigue life evaluation using modified stress index parameter, considering the effective eccentric length, can predict the life more exactly than conventional stress index parameter.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.730-739
• /
• 2010

Stress history increases in penetration resistance due to the increase in residual horizontal stress of granular soil. This study analyzes the effect of stress history on the results of CPT and DMT from calibration chamber specimen in OC as well as NC state. Test results show that the normalized cone resistance by mean effective stress correlates well with the relative density and the state parameter, whereas the normalized cone resistance with regard to vertical effective stress is a little affected by stress history. The horizontal stress index($K_D$) in DMT more reflects the influence of stress history on granular soil than the dilatometer modulus($E_D$) and cone resistance($q_c$). The $K_D/K_0$, in which the effect of stress history on $K_D$ is compensated by the at-rest coefficient of earth pressure, $K_0$, is related to relative density, state parameter and the normalized cone resistance by mean effective stress. It is also observed that the normalized dilatometer modulus by mean effective stress($E_D/{\sigma_m}'$) is unique correlated with the state parameter, regardless of stress history.

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.142-148
• /
• 2005

In this paper, the stress singularity on interface of friction welded dissimilar materials was investigated by using 2-dimensional elastic boundary element method. It is required that stress distributions and stress singularities on an interface for friction welded dissimilar materials analize to establish strength evaluation. The stress singularity index ($\lambda$) and stress singularity factor ($\Gamma$) were calculated from the results of stress analysis. The stress singularities on variations for shapes and thickness of friction welded flashes were analized and discussed. This paper suggested that the strength evalution by using the stress singularity factors as fracture parameters, considering the stress singularity on an interface edge of friction welded dissimilar materials were very useful.

• Steel and Composite Structures
• /
• 제22권6호
• /
• pp.1239-1259
• /
• 2016

The modified couple stress-based third-order shear deformation theory is presented for sigmoid functionally graded materials (S-FGM) plates. The advantage of the modified couple stress theory is the involvement of only one material length scale parameter which causes to create symmetric couple stress tensor and to use it more easily. Analytical solution for dynamic instability analysis of S-FGM plates on elastic medium is investigated. The present models contain two-constituent material variation through the plate thickness. The equations of motion are derived from Hamilton's energy principle. The governing equations are then written in the form of Mathieu-Hill equations and then Bolotin's method is employed to determine the instability regions. The boundaries of the instability regions are represented in the dynamic load and excitation frequency plane. It is assumed that the elastic medium is modeled as Pasternak elastic medium. The effects of static and dynamic load, power law index, material length scale parameter, side-to-thickness ratio, and elastic medium parameter have been discussed. The width of the instability region for an S-FGM plate decreases with the decrease of material length scale parameter. The study is relevant to the dynamic simulation of micro structures embedded in elastic medium subjected to intense compression and tension.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.439-445
• /
• 2012

The stress singularity for the excess adhesive on interface of adhesively bonded joint was investigated by using the 2-dimensional elastic boundary element method (BEM). To establish a reasonable strength evaluation method and a fracture criterion for the excess adhesive of interface in adhesively bonded joint, it is necessary to evaluate fracture parameters with various bonding conditions. Under the variations of adhesively bonded thickness (h) and diameter (d) for the excess adhesive, a stress analysis was performed, and from the results, the stress singularity index (${\lambda}$) and the stress singularity factor (${\Gamma}$) were calculated. The variations have a great influences on the stress singularity for the excess adhesive of interface in adhesively bonded joint, and the ${\Gamma}$ is reduced as the "h" and "d" increase.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권9호
• /
• pp.1332-1339
• /
• 2019

Heat stress exerts a substantial effect on dairy production. The temperature and humidity index (THI) is widely used to assess heat stress in dairy operations. Herein, we review the effects of high temperature and humidity on body temperature, feed intake, milk production, follicle development, estrous behavior, and pregnancy in dairy cows. Analyses of the effects of THI on dairy production have shown that body temperature is an important physiological parameter in the evaluation of the health state of dairy cows. Although THI is an important environmental index and can help to infer the degree of heat stress, it does not reflect the physiological changes experienced by dairy cows undergoing heat stress. However, the simultaneous measurement of THI and physiological indexes (e.g., body temperature) would be very useful for improving dairy production. The successful development of automatic detection techniques makes it possible to combine THI with other physiological indexes (i.e., body temperature and activity), which could help us to comprehensively evaluate heat stress in dairy cows and provide important technical support to effectively prevent heat stress.

• Geomechanics and Engineering
• /
• 제7권3호
• /
• pp.297-316
• /
• 2014

This paper presents a detailed study focused on investigating the effects of silt content on the static and dynamic properties of sand-silt mixtures. Specimens with a low-plastic silt content of 0, 15, 30 and 50% by weight were tested in static triaxial, cyclic triaxial, and resonant columns in addition to consolidation tests to determine such parameters as compression index, internal friction angle, cohesion, cyclic stress ratio, maximum shear modulus, normalized shear modulus and damping ratio. The test procedures were performed on specimens of three cases: constant void ratio index, e = 0.582; same peak deviator stress of 290 kPa; and constant relative density, $D_r$ = 30%. The test results obtained for both the constant-void-ratio-index and constant-relative-density specimens showed that as silt content increased, the internal friction angle, cyclic stress ratio and maximum shear modulus decreased, but cohesion increased. In testing of the same deviator stress specimens, both cohesion and internal friction angle were insignificantly altered with the increase in silt content. In addition, as silt content increased, the maximum shear modulus increased. The cyclic stress ratio first decreased as silt content increased to reach the threshold silt content and increased thereafter with further increases in silt content. Furthermore, the damping ratio was investigated based on different silt contents in three types of specimens.

• 한국지반공학회논문집
• /
• 제26권7호
• /
• pp.7-16
• /
• 2010

응력이력은 사질토 지반의 잔류 수평응력을 증가시켜 현장시험의 관입저항을 증가시킨다. 본 연구에서는 챔버에 조성된 정규 및 과압밀 시료에 대한 콘관입시험과 딜라토미터 시험을 수행하고 응력이력이 시험결과와 측정값의 상관관계에 미치는 영향을 분석하였다. 시험결과, 평균 유효응력으로 정규화된 콘선단저항은 상대밀도 및 상태정수와 높은 상관성을 보였다. 딜라토미터의 수평응력지수($K_D$)는 콘선단저항($q_c$) 뿐만 아니라, 딜라토미터 계수($E_D$) 보다도 응력이력 영향을 효과적으로 반영하였다. 수평응력지수에 반영된 응력이력의 영향을 정지토압계수인 $K_0$로 보정한 $K_D/K_0$는 상대밀도 뿐만 아니라, 상태정수, 평균 유효응력으로 정규화된 콘선단저항과 응력이력에 관계없는 높은 상관성을 보였다. 또한 평균 유효응력으로 정규화된 딜라토미터 계수($E_D/{\sigma}_m'$)와 상태정수의 관계도 응력이력에 관계없이 유일한 식으로 표현되었다.

• Toxicological Research
• /
• 제20권3호
• /
• pp.213-223
• /
• 2004

This work aimed to study the effectiveness of cellular oxidative parameter (malondial-dehyde, protein carbonyl, and 8-hydroxy-2'deoxyguanosine). The experimental groups were aluminum treated rats and control rats. Aluminum treatd rats were given intraperitoneally aluminum nitrate nonahydrate ($Al^{3+}$, 0.2 mmol/kg) daily for 30 days except Sunday. Control rats were injected 1 ml of saline. After the dose, rats were decapitated and hippocampus and cerebral cortex were removed. The measured parameters were tissue malondialdehyde (MDA, index of lipid peroxidation), protein carbonyl (index of protein oxidation), 8-hydroxy-2'-deoxy-guanosine (8-OHdG, index of DNA oxidation), reduced glutathione (GSH) levels as well as glutathione reductase (GR) and catalase. AI concentrations in the tissues were also measured. All results were corrected by tissue protein levels. The results were as followed; 1. The concentrations of AI in the cortex and hippocampus were significantly higher in the AI-treated rats than in the control rats. 2. Antioxidative enzyme's activity, catalase and GR, were significantly higher in the AI-treated rats than the control rats. GSH levels were also higher in the AI-treated rats. 3. MDA, protein carbonyl, and 8-OHdG concentration of AI-treated rats were significantly higher than those of control rats. 4. The concentrations of antioxidants, and oxidative stress parameter were correlated with the concentrations of AI in hippocampus and cerebral cortex. Catalase and GR activity were also correlated with the concentration of AI. Based on these results, it can be suggested that intraperitoneally injected AI was accumulated in the brain and induced the increase of antioxidant levels and antioxidative enzyme activity. Also, the oxidative products of cellular macromolecules are significantly related to tissue AI concentration. Therefore MDA, protein carbonyl, and 8-OHdG are useful markers for oxidative stress on cellular macromolecules.

• Computers and Concrete
• /
• 제11권2호
• /
• pp.149-167
• /
• 2013

The complete stress-strain behavior of steel fiber reinforced concrete in compression is needed for the analysis and design of structures. An experimental investigation was carried out to generate the complete stress-strain curve of high-performance steel fiber reinforced concrete (HPSFRC) with a strength range of 52-80 MPa. The variation in concrete strength was achieved by varying the water-to-cementitious materials ratio of 0.40-0.25 and steel fiber content (Vf = 0.5, 1.0 and 1.5% with l/d = 80 and 55) in terms of fiber reinforcing parameter, at 10% silica fume replacement. The effects of these parameters on the shape of stress-strain curves are presented. Based on the test data, a simple model is proposed to generate the complete stress-strain relationship for HPSFRC. The proposed model has been found to give good correlation with the stress-strain curves generated experimentally. Inclusion of fibers into HPC improved the ductility considerably. Equations to quantify the effect of fibers on compressive strength, strain at peak stress and toughness of concrete in terms of fiber reinforcing index are also proposed, which predicted the test data quite accurately. Compressive strength prediction model was validated with the strength data of earlier researchers with an absolute variation of 2.1%.