• 한국재료학회지
• /
• 제19권2호
• /
• pp.73-78
• /
• 2009

This study investigated the dependence of the various sputtering conditions (Ar pressure: $2{\sim}10\;mTorr$, Power: $50{\sim}150\;W$) and thickness ($50{\sim}1200\;nm$) of Si thin film on the electrochemical properties, microstructural properties and the capacity fading of a Si thin film anode. A Si layer and a Ti buffer layer were deposited on Copper foil by RF-magnetron sputtering. At 10 mTorr, the 50 W sample showed the best capacity of 3323 mAh/g, while the 100 W sample showed the best capacity retention of 91.7%, also at 10 mTorr. The initial capacities and capacity retention in the samples apart from the 50W sample at 10 mTorr were enhanced as the Ar pressure and power increased. This was considered to be related to the change of the microstructure and the surface morphology by various sputtering conditions. In addition, thinner Si film anodes showed better cycling performance. This phenomenon is caused by the structural stress and peeling off of the Si layer by the high volume change of Si during the charge/discharge process.

• 한국컴퓨터산업학회논문지
• /
• 제6권2호
• /
• pp.357-364
• /
• 2005

최근 들어 우리나라에서는 설치의 간편성과 높은 신뢰도를 가진 전력케이블의 사용이 증가하고 있다. 전력케이블은 출고 전에 IEEE std. 404-1993 시험을 거쳐 안정성을 확인하고 있지만 포설시 발생하는 접속부 내부의 결함으로 인하여 많은 문제가 발생하고 있다. 특히 불순물 혼입 또는 공극 발생시 고장율은 증가하게 된다 부분방전 검출은 포설 후 전력케이블의 상태를 관측할 수 있는 유용한 방법이다. 본 연구에서는 부분방전 특성을 평가하고자 케이블 접속재인 EPR과 케이블 절연체인 XPLE 사이에 인공 결함을 발생시킨 후 데이터 취득 시스템을 이용하여 $\Phi-q-n$ 특성을 검출하였으며, 부분방전의 정량적 해석을 위해 필요한 통계량을 계산하였으며, 신경망 모델을 적용하여 패턴 분석을 수행하여 $88\~96\%$의 구별이 가능하였다.

• 복식
• /
• 제66권3호
• /
• pp.75-92
• /
• 2016

The purpose of this study was to prove how sociocultural perspective of obesity, differences in consumers' perception of body and attitudes of accepting obesity affected individuals' clothing behaviors through cross-cultural studies. The data collected were composed of 612 Korean and US consumers in the 20's and 30's that had experiences in purchasing plus-size products. The results were as follows. First, BMI index was lower in Korean consumers than the US consumers, but Korean consumers received more stress from being overweight compared to the US consumers, and had a more negative attitude about their body. Second, although Korean consumers had lower BMI index and degrees of obesity than US consumers, they were severely stressed by obesity and were found to have a higher level of dissatisfaction with their bodies. Third, Korean consumers responded more sensitively to obesity and had a tendency to display a more negative attitude regarding obesity, and a more passive dependence on clothing. Forth, differences in the body shape were reflected even in wearing evaluation, and US consumers showed a more positive attitude toward evaluations of size suitability and fitness. Fifth, the plus-size market for Korean consumers was still not active, and most products purchased were generic brands obtained from online shopping malls through the Internet. However, in the case of the US, in which the ratio of obese people is high and the plus-size market is growing, consumers were purchasing plus-size brands through various distribution online and offline channels. Sixth, Korean consumers were less satisfied than US consumers with shops, sizes and fitness; however, they were more satisfied with design factors. Finally, it is expected that this study can offer practical implications for marketers and product developers running plus-size market for young obese consumers in their 20 and 30s.

• Journal of Microbiology
• /
• 제44권1호
• /
• pp.35-41
• /
• 2006

The unique gene encoding thioredoxin reductase (TrxR) was previously cloned and characterized from the fission yeast Schizosaccharomyces pombe, and its expression was induced by oxidative stress. To elucidate tbe regulatory mechanism of the S. pombe TrxR gene, three fusion plasmids were generated using polymerase chain reaction: pYUTR20, pYUTR30, and pYUTR40. Plasmid pYUTR20 has an upstream region of 891 base pairs, pYUTR30 has 499 in this region, and pYUTR40 has an 186 bp upstream region. Negatively acting sequence is located between $-1,526\;\~\;-891bp$ upstream of the gene. The upstream sequence, responsible for the induction of TrxR by menadione (MD), is situated on the $-499\;\~\;-186bp$ region, which is also required for TrxR induction by mercuric chloride. The same region also appeared to be required for Pap1-mediated transcriptional regulation of the TrxR gene, which contains the two plausible Papl binding sites, TTACGAAT and TTACGCGA. Consistently, basal and inducible expression of the TrxR gene was markedly lower in the Pap1-negative TP108-3C cells than in wild-type yeast cells. In summary, up-regulation of the S. pombe TrxR gene is mediated by Pap1 via the transcriptional motif(s) located on the $-499\;\~\;-186bp$ region.

• 한국재료학회지
• /
• 제28권6호
• /
• pp.317-323
• /
• 2018

Crystal structure of the $L1_2$ type $(Al,X)_3Ti$ alloy (X = Cr,Cu) is analyzed by X-ray diffractometry and the nonuniform strain behavior at high temperature is investigated. The lattice constants for the $L1_2$ type $(Al,X)_3Ti$ alloys decrease in the order of the atomic number of the substituted atom X, and the hardness tends to increase. In a compressive test at around 473K for $Al_{67.5}Ti_{25}Cr_{7.5}$, $Al_{65}Ti_{25}Cr_{10}$ and $Al_{62.5}Ti_{25}Cu_{12.5}$ alloys, it is found that the stress-strain curves showed serration, and deformation rate dependence appeared. It is assumed that the generation of serration is due to dynamic strain aging caused by the diffusion of solute atoms. As a result, activation energy of 60-95 kJ/mol is obtained. This process does not require direct involvement. In order to investigate the generation of serrations in detail, compression tests are carried out under various conditions. As a result, in the strain rate range of this experiment, serration is found to occur after 470K at a certain critical strain. The critical strain increases as the strain rate increases at constant temperature, and the critical strain tends to decrease as temperature rises under constant strain rate. This tendency is common to all alloys produced. In the case of this alloy system, the serration at around 473K corresponds to the case in which the dislocation velocity is faster than the diffusion rate of interstitial solute atoms at low temperature.

• Environmental Analysis Health and Toxicology
• /
• 제29권
• /
• pp.10.1-10.6
• /
• 2014

Objectives Cigarette smoking had been recorded as the main cause of impaired endothelium-dependent vasodilation in smokers by reducing nitric oxide (NO), a production of endothelial nitric oxide synthase (eNOS). However, the mechanism of NO impairment via eNOS activity is unclear until now. In this study, cell passage is suggested to be a relevant factor to eNOS expression under cigarette smoking stress. Methods Bovine aortic endothelial cells (BAECs) were chosen as the research subject with passages ranking from 6 to 9 (6P to 9P). After exposure of cigarette smoking extract (CSE) solution, MTT assay and Western blot method were performed to check the cell viability as well as eNOS protein concentration. In these experiments, four concentrations of CSE at 0.5, 1, 2, and 4% were selected for treatment. Results Our results showed that cells almost died at 4% of CSE. Besides, eNOS protein mass had a linear decrease under the increase of CSE concentration. In addition, the effect of CSE on eNOS expression was dissimilar between different passages. Conclusions This study indicated that CSE had effect on both cell viability and eNOS expression. Besides, a reduction in protein mass was matched with the decrease of cell viability due to CSE tress. Last but not least, the response of eNOS protein to different concentration of CSE at different passages was disparate, making the hypothesis about cell passage related inhibition of eNOS caused by CSE solution.

• 한국재료학회지
• /
• 제21권1호
• /
• pp.34-38
• /
• 2011

In this study, the effects of an annealed buffer layer with different thickness on heterojunction diodes based on the ZnO/ZnO/p-Si(111) systems were reported. The effects of an annealed buffer layer with different thickness on the structural, optical, and electrical properties of zinc oxide (ZnO) films on p-Si(111) were also studied. Before zinc oxide (ZnO) deposition, different thicknesses of ZnO buffer layer, 10 nm, 30 nm, 50 nm and 70 nm, were grown on p-Si(111) substrates using a radio-frequency sputtering system; samples were subsequently annealed at $700^{\circ}C$ for 10 minutes in $N_2$ in a horizontal thermal furnace. Zinc oxide (ZnO) films with a width of 280nm were also deposited using a radio-frequency sputtering system on the annealed ZnO/p-Si (111) substrates at room temperature; samples were subsequently annealed at $700^{\circ}C$ for 30 minutes in $N_2$. In this experiment, the structural and optical properties of ZnO thin films were studied by XRD (X-ray diffraction), and room temperature PL (photoluminescence) measurements, respectively. Current-voltage (I-V) characteristics were measured with a semiconductor parameter analyzer. The thermal tensile stress was found to decrease with increasing buffer layer thickness. Among the ZnO/ZnO/p-Si(111) diodes fabricated in this study, the sample that was formed with the condition of a 50 nm thick ZnO buffer layer showed a strong c-axis preferred orientation and I-V characteristics suitable for a heterojunction diode.

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3453-3458
• /
• 2011

The $Mg_xZn_{1-x}O$ thin films with the various content ratio ranging from 0 to 0.4 were prepared by sol-gel spincoating method. To investigate the effects of content ratio on the structural and optical properties of the $Mg_xZn_{1-x}O$ thin films, scanning electron microscopy (SEM), X-ray diffraction (XRD), and photoluminescence (PL) were carried out. With increase in the content ratio, the grain size of the $Mg_xZn_{1-x}O$ thin films was increased, however, at the content ratio above 0.2, MgO particles with cubic structure were formed on the surface of the $Mg_xZn_{1-x}O$ thin films, indicating that the Mg content exceeded its solubility limit in the thin films. The residual stress of the $Mg_xZn_{1-x}O$ thin films is increased with increase in the Mg mole fraction. In the PL investigations, the bandgap and the activation energy of the $Mg_xZn_{1-x}O$ thin films was increased with the Mg mole fraction.

• 보건교육건강증진학회지
• /
• 제30권3호
• /
• pp.35-46
• /
• 2013

Objectives: The aim of this study was to investigate the degree of depression cognition and health promoting behaviors of smoking and non-smoking college students. Methods: The research design was a descriptive survey study, and 379 college students were selected by convenience sampling. Measurements were Fagerstrom test for Nicotine Dependence, Depressive cognition and Health Promotion Lifestyle Profile-II. Descriptive statistics, Pearson's correlation, and logistic regression were used to analyze the data. Results: 1) Smoking students showed lower scores in depressive cognitions than non-smoking students, which means that the smoker's depression was higher than the non-smokers. 2) Depressive cognition and health promoting behaviors were negatively correlated for the smokers (r=-.30, p<.01), while they were positively correlated for the non-smokers (r=.45, p<.001). 3) The variables predicting the smoker's health promoting behavior were physical activity (OR .24), health responsibility (OR .25), spiritual growth (OR 5.10), stress management (OR 4.41), extrovert personality (OR .25), and depressive cognition (OR 1.81). Conclusions: Depression and health promoting behavior should be considered in the smoking cessation programs for college students.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.173-180
• /
• 2003

토목섬유 경계 접촉면들의 동적거동을 이해하는데 매우 중요할 수도 있음에도 불구하고 접촉면들의 동적마찰저항과 변위속도 관계에 관한 연구가 아직까지는 미비한 실정이다. 이에 따라 토목섬유에 대한 실험적 인 연구를 진동대를 이용하여 수행하였다. 반복적, 변위속도 조절장치를 개발하여 사용하였으며 토목섬유 경계 접촉면들의 동적마찰저항과 변위속도사이의 관계를 조사하였다. 실험으로부터 지오텍스타일이 포함된 경계 접촉면에서는 변위속도 증가에 따라 전단강도도 증가한다는 중요한 결과를 얻었다. 이와는 달리 수침상태에서는 접촉면 사이에 갇힌 물에 의한 윤활 효과 등으로 인해 접촉 전단강도가 변위속도에 민감하지 않다는 결과를 얻었다. 본 시험결과는 토목섬유에 비교적 낮은 수직응력이 작용하는 매립장 덮개 및 사면의 동적안정 해석등에 적용할 수 있다.