• 한국기계가공학회지
• /
• 제2권3호
• /
• pp.48-55
• /
• 2003

This study investigates the effect of temperature and electric field strength on the Bingham characteristics of Electro-Rheological(ER) fluids which change their Yield shear stress and viscosity by temperature and electric field strength. It is found that under constant temperature the Yield sheal stress and viscosity of ER fluids proportionally increase with the applied electric field strength, and under constant applied electric field strength the Yield shear stress and viscosity of ER fluids decrease with the increasing temperature. These results are considered to be applied to the fluid and pneumatic power industry.

• 한국환경보건학회지
• /
• 제38권3호
• /
• pp.195-203
• /
• 2012

Objectives: This paper aims to investigate the influence on stress hormones of job stress resulting from firefighting duties, as well as the degree of such influence. Methods: KOSS-26 and stress hormones such as norepinephrine (NE), epinephrine (EPI), adrenocorticotrophic hormone (ACTH), and cortisol were analyzed for 191 male firefighters from the western area of Incheon, the Incheon Industrial Complex, and Bucheon, Korea. Job stress and stress hormones were compared between a office working group and field-working group. Results: There was no significant difference in EPI and ACTH between the two groups. Change of stress hormones prior to engaging in typical duties, following typical duties, and immediately after field activities was examined. All the EPI, ACTH, and cortisol showed statistically significant changes with time, but not NE in the blood. In the field-working group, the cortisol levels in the blood of the firefighting and rescue groups showed notable differences depending on the time at which the measurements were taken. Conclusion: The differences in stress hormone levels depending on the type of duties of the firefighters were identified. Thus, interventions proper to job requirements is required in order to ease stress.

• 대한기계학회논문집A
• /
• 제41권1호
• /
• pp.7-11
• /
• 2017

본 논문은 등방성 재료로 된 반 무한 평판에 존재하는 반 무한 균열에서 엄밀해를 구성하여 응력확대계수를 계산하였다. H. Tada, P. Paris, G. Irwin의 "The Stress Analysis of Cracks Handbook"에 수록된 공식과 Bueckner의 공식에 엄밀해로부터 구한 균열 면에 작용하는 표면력을 적용하여 응력확대계수를 계산하였다. Bueckner의 공식은 엄밀해와 일치하였고 Tada의 Handbook에 수록된 공식은 엄밀해와 일치하지 않았다. 따라서 Tada의 공식이 오류임을 알 수 있다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권3호
• /
• pp.24-28
• /
• 2005

Stress state of chip formation zone is one of the main problems in metal cutting mechanics. In two-dimensional case this process is usually considered as consistent shears of work material along one of several shear surfaces, separating chip from workpiece. These shear planes are assumed to be trajectories of maximum shear stress forming corresponding slip-line field. This paper suggests a new approach to the constriction of slip-line field, which implies uniform compression in chip formation zone. Based on the given model it has been found that imaginary shear line in orthogonal cutting is close to the trajectory of maximum normal stress and the problem about its determination has been considered as well. It has been shown that there is a second central slip-line field inside chip, which corresponds well to experimental data about stress distribution on tool rake face and tool-chip contact length. The suggested model would be useful in understanding mechanistic problems in machining.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1598-1608
• /
• 1997

Based on the application of te theory of conjugate approximations and the Loubignac's iterative method in a local region, a method to improve the stress filed in a displacement-formulated finite element solution has been proposed. The validity of the proposed method has been tested through two examples : a thick cylinder under internal pressure loading and an infinite plate with a central circular hole subjected to uniaxial tension. As a result of analysis of the examples, it was found that the stress field obtained for the local region model by the proposed method approximates well for the whole domain model. In addition, it was found that because of a significant decrease in the computing time to obtain the improved stress field, the proposed method is efficient and useful for the detailed stress analysis in local regions.

• International Journal of Advanced Culture Technology
• /
• 제8권3호
• /
• pp.73-83
• /
• 2020

In this study, the stress and experience of overcoming stress by on-site missionaries who rescue North Korean defectors was investigated in depth through a phenomenological approach. To this end, 7 missionaries with more than 5 years of experience in North Korean missionary mission were selected, and in-depth interviews and written interviews were conducted once. The collected data were analyzed through the phenomenological research methods of Giorgi and Colaizzi. The results were categorized into 'calling and obedience', 'mission and stress', 'anxiety situation and stress', 'stress situation and frustration', 'stress experience and psychological change', 'self insight and overcoming stress', 'resolution and recovery of stress', and 'new determination and rededication'. By researching and analyzing the stress and stress experience of the missionaries who rescue North Korean defectors in the field, this study has significance for helping missionaries continue to help them through managing and overcoming their stress.

• Structural Engineering and Mechanics
• /
• 제55권4호
• /
• pp.885-900
• /
• 2015

This paper introduces Romberg-Richardson's method as one of the numerical integration tools for computation of stress intensity factor in a pre-cracked specimen subjected to a complex stress field across the crack faces. Also, the computation of stress intensity factor for various stress fields using existing three methods: average stress over interval method, piecewise linear stress method, piecewise quadratic method are modified by using Richardson extrapolation method. The direct integration method is used as reference for constant and linear stress distribution across the crack faces while Gauss-Chebyshev method is used as reference for nonlinear distribution of stress across the crack faces in order to obtain the stress intensity factor. It is found that modified methods (average stress over intervals-Richardson method, piecewise linear stress-Richardson method, piecewise quadratic-Richardson method) yield more accurate results after a few numbers of iterations than those obtained using these methods in their original form. Romberg-Richardson's method is proven to be more efficient and accurate than Gauss-Chebyshev method for complex stress field.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.234-234
• /
• 2009

This paper illustrates the use of electric field computation to optimize the design of high voltage composite bushing. In the bushing, a high electric stress occurred between field shaper and central conductor by the closely space. Also coaxial cylindrical shield has a great height along the axis to control an electric field. Consequently, all the potentials are raised axially along the field shaper and electric stress is concentrated on a part of the surface of the FRP tube near the upper end of the field shaper. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymer bushing. The optimized design uses internal elements for electric stress grading at critical parts of the bushing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.35-35
• /
• 2010

This paper illustrates the use of electric field computation to optimize the design of high voltage composite bushing. In the bushing, a high electric stress occurred between field shaper and central conductor by the closely space. Also coaxial cylindrical shield has a great height along the axis to control an electric field. Consequently, all the potentials are raised axially along the field shaper and electric stress is concentrated on a part of the surface of the FRP tube near the upper end of the field shaper. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymer bushing. The optimized design uses internal elements for electric stress grading at critical parts of the bushing.

• 한국건축시공학회지
• /
• 제18권2호
• /
• pp.177-183
• /
• 2018

건축공사 현장에서 근무하는 현장관리자들은 조직 내에서 다양한 사람들과 함께 업무를 수행하고 있기 때문에 조직 내 커뮤니케이션 문제가 조직구성원의 직무스트레스에 영향을 준다. 따라서 본 논문의 목적은 상대방의 커뮤니케이션 유형이 건축공사 현장관리자의 직무스트레스에 미치는 영향을 파악하는 것이다. 연구 결과 상대방의 커뮤이케이션 유형에 따라서 건축공사 현장관리자들이 느끼는 직무스트레스는 달라진다는 것을 파악하였다. 특히 상대방의 커뮤니케이션 유형이 감정형, 지휘형일 때 직무스트레스가 높게 나타났으며, 지원형, 사려형일 때 직무스트레스가 낮게 나타났다. 본 연구 결과는 건축공사 성과 향상을 위한 현장조직 수행관리 체계를 구축하는데 도움을 줄 수 있을 것이다.