• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.117-124
• /
• 2003

The lightness of components required in automobile and machinery industry is requiring high strength of components. In particular, manufacturing process and new materials development for solving the fatigue fracture problem attendant upon high strength of suspension of automobile are actively advanced. In this paper, the effect of compressive residual stress of spring steel(JISG SUP-9) by shot-peening on fatigue crack growth characteristics in high temperatures($100^{\circ}C$, $150^{\circ}C$, $180^{\circ}C$) was investigated with considering fracture mechanics. So, we can obtain followings. (1)Compressive residual stress decreases in high temperature, that is, with increasing temperature. (2)The effect of compressive residual stress on fatigue crack growth behavior in high temperature increases below $\Delta$K=17~19MPa (3)It was investigated by SEM that the constraint of compressive residual stress for plastic zone of fatigue crack tip was decreased in high temperature as compared with room temperature.

• Structural Engineering and Mechanics
• /
• v.62 no.6
• /
• pp.739-748
• /
• 2017

Notches such as slots are typical geometric features on mechanical components that promote fatigue crack initiation. Unlike for components with open hole type notches, there are no conventional treatments to enhance fatigue behavior of components with slots. In this work we evaluate the viability of applying laser shock peening (LSP) to extend the fatigue life of 6061-T6 aluminum components with slots. The feasibility of using LSP is evaluated not only on damage free notched specimens, but also on samples with previous fatigue damage. For the LSP treatment a convergent lens was used to deliver 0.85 J and 6 ns laser pulses 1.5 mm in diameter by a Q-switch Nd: YAG laser, operating at 10 Hz with 1064 nm of wavelength. Residual stress distribution was assessed by the hole drilling method. A fatigue analysis of the notched specimens was conducted using the commercial code FE-Safe and different multiaxial fatigue criteria to predict fatigue lives of samples with and without LSP. The residual stress field produced by the LSP process was estimated by a finite element simulation of the process. A good comparison of the predicted and experimental fatigue lives was observed. The beneficial effect of LSP in extending fatigue life of notched components with and without previous damage is demonstrated.

• The Journal of Korean Society for School & Community Health Education
• /
• v.19 no.3
• /
• pp.1-14
• /
• 2018

Objectives: The purpose of this study was to investigate the prevalence of metabolic syndrome and to find related factors according to the number of metabolic syndrome diagnostic components in Korean adolescents. Methods: The subjects of this study were 469 Korean adolescents aged from 12 to 18 enrolled in the 2016 Korea National Health and Nutrition Examination Survey. Statistical package R 3.4.2 was used for programming to apply diagnostic criterion of adolescent metabolic syndrome and for the analysis of the data such as weighted frequent analysis, weighted mean analysis and complex sampling design logistic regression analysis. Results: For adolescents 12 to 18 years of age, 2.55% had more than 2(${\geq_-}3$), 9.88% had more than 1(${\geq_-}2$) and 33.17% had more than 0(${\geq_-}1$) metabolic syndrome diagnostic components. It has been found that risk factors for no less than 2 metabolic syndrome diagnostic components were higher body mass index and higher stress, and risk factors for no less than 1 were higher body mass index, younger teenager and female. Conclusion: Obesity is the primary risk factor for the development of adolescent metabolic syndrome. Female or younger teenager are more likely to have one or more metabolic syndrome diagnostic components, and higher stress develop to the risk level of having two or more metabolic syndrome diagnostic components. Therefore, it is important to focus on obesity and stress management for the prevention and control of Korean adolescent metabolic syndrome.

• Computers and Concrete
• /
• v.21 no.4
• /
• pp.451-461
• /
• 2018

Present study is mainly concerned about the idea of innovative utilization of bamboo in modern construction. Owing to its compatible mechanical properties, a beneficial effect of its use in reinforced concrete (RC) frame infills has been observed. In this investigation, finite element analyses have been performed to examine the failure pattern and stress distribution pattern through the infills of a moment resisting RC frame. To validate the pragmatic use of bamboo reinforced components as infills, earthquake loading corresponding to Nepal earthquake had been considered. The analysis have revealed that introduction of bamboo in RC frames imparts more flexibility to the structure and hence may causes a ductile failure during high magnitude earthquakes like in Nepal. A more uniform stress distribution throughout the bamboo reinforced wall panels validates the practical feasibility of using bamboo reinforced concrete wall panels as a replacement of conventional brick masonry wall panels. A more detailed analysis of the results have shown the fact that stress concentration was more on the frame components in case of frame with brick masonry, contrary to the frame with bamboo reinforced concrete wall panels, in which, major stress dispersion was through wall panels leaving frame components subjected to smaller stresses. Thus an effective contribution of bamboo in dissipation of stresses generated during devastating seismic activity have been shown by these results which can be used to concrete the feasibility of using bamboo in modern construction.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2018-2025
• /
• 2002

It is well known that the strength and the fatigue life of welded steel components are affected extensively by welding residual stresses distributed around their weldments under not only monotonic but also cyclic loads. The externally applied loads are to be superimposed with the welding residual stresses, so that unexpected deformations and failures of the components might occur. These residual stresses are not kept constant, but relaxed or redistributed during in service. Under monotonic loads the relaxation takes place when the sum of external and welding residual stress exceeds locally the yield stress of material used. By the way, it is shown that under cyclic loads the welding residual stress is considerably relieved by the first or the early cycles of loads, and then gradually relaxed with increasing loading cycles. Although many investigations in this field have been carried out, the phenomenon and mechanism of the stress relaxation are still not clear, and there are few comprehensive models to predict amount of relaxed welding residual stress. In this study, the characteristics of the welding residual stress relaxation under monotonic and cyclic loads were investigated, and a model to predict quantitatively amount of welding residual stress relaxation was proposed.

• Journal of Applied Reliability
• /
• v.17 no.1
• /
• pp.28-37
• /
• 2017

Purpose: This paper proposes a procedure that may infer and identify interaction failures in a module. Methods: In design FMEA, we defined an interaction model between components and proposed a method for selecting a single component by using the standard specification classification table and four methods for choosing the related components. We also introduced the function tree for function and requirement characteristic analysis and proposed utilization of standard stress lists and 1st and 2nd stress analysis tables to determine the effect the stress analysis has on interactions. Finally, the interaction mechanism diagram was proposed and used to infer the failure mechanism. Process FMEA also established procedures in a similar way. Results: We established a procedure for predicting the failure mode due to interaction between components based on Company A's multi-step FMEA procedure. Conclusion: By applying the proposed interaction FMEA procedure to the development model, we were able to confirm the effect of the new derivation on the failure mode of interaction, which was not predicted by the existing FMEA.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.3
• /
• pp.655-662
• /
• 2004

In this paper, we assume that strengths of two components system follow a type II bivariate Pareto model with bivariate type I censored data. And these two components are subjected to a common stress which is independent of the strengths of the components. We obtain estimators for the system reliability based on likelihood function and relative frequency, respectively. Also we construct approximated confidence intervals for the reliability based on maximum likelihood estimator and relative frequency estimator, respectively. Finally we present a numerical study.

• Structural Engineering and Mechanics
• /
• v.58 no.4
• /
• pp.677-687
• /
• 2016

On the basis of the energy approach it is reported a development of the yield function and the constitutive equations for the orthotropic material with consideration of the crystal lattice constants and parameters of the crystallographic texture for the general stress state. For practical use in sheet metal forming analysis it is considered different loading scenarios: plane stress and plane strain states. Using the proposed yield function, the influence of single ideal components on the shape of yield surface was analyzed. The six texture components investigated here were cube, Goss, copper, brass, S and rotated cube, as these components are typically observed in rolled sheets from FCC alloys.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.3 s.246
• /
• pp.249-259
• /
• 2006

Stress and displacement fields of a propagating Mode III crack in an orthotropic functionally gradient material (OFGM), which has (1) linear variation of shear modulus with a constant density, and (2) an exponential variation of shear modulus and density, are derived. The equations of motion in OFGM are developed and solution to the displacement and stress fields fer a propagating crack at constant speed though an asymptotic analysis. The stress terms associated with $\gamma^{-1/2}\;and\;\gamma^{0}$ are not affected by the FGM constant $\zeta$ which is nonhomogeneous parameter, only on the higher order terms, the influences of nonhomogeneity on the stress are explicitly brought out. When the FGM constant $\zeta\;is\;zero\;or\;\gamma{\rightarrow}0$, the fields for OFGM are almost same as the those for homogeneous orthotropic material. Using the stress components, the effects of nonhomogeneity on stress components are discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.1109-1115
• /
• 2008

In the ubiquitous health monitoring environments, it is quite important not only to evaluate the physiological health condition but also mental stress condition. In order to achieve this goal, a heart activity monitoring system utilizing a wearable bipolar electrode is devised and the heart rate variability(HRV) is extracted and interpreted in both frequency and time feature domains. Consequently, to evaluate the emotional stress condition of the subjects, a stress-induced experimental protocol was applied to healthy subjects and the time and frequency features of heart activity were analyzed in terms of the ratio of low frequency components v.s., high frequency components and the relevant the moving average distributions compromising the successive RR peaks intervals in the ambulatory ECG measurement system.