• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.4
• /
• pp.309-315
• /
• 1999

Rice seedling test was conducted to check the loging tolerance at ripening stage through evaluating the root characters. Thirteen Korean and foreign rice cultivars with direct seeding adaptable or high quality characteristics were grown in a cell pot and under submerged paddy. The root characters and pushing resistance of rice hill were determined at seedling and ripening stage, respectively. The diameter of crown root at the 7th and 8th leaf stages was thicker in lodging tolerance cultivars than those of others and showed significant-positive correlation with both pushing resistance and crown root diameter of mature plants. Also, the tensile strength of crown root at the 7th and 8th leaf stage showed highly positive correlation with the tensile strength of crown root of mature plants. The number of crown root at 7th leaf stage was significant-positively correlated with that of mature plant. The diameter of seminal root was not significantly correlated with the diameter of crown root throughout the whole growth stage. These results indicate that the diameter, tensile strength and number of crown root associated with root lodging tolerance can be detected with the seedling at about 7th or 8th leaf stage, and the seedling test using the cell pot is an useful and practical method to select lodging tolerant cultivars or lines of rice based on root characters, especially diameter of crown root.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.27-32
• /
• 1997

This study was carried out to find the relationship between anatomical characters and compression strength parallel to grain of Pinus densiflora S. et. Z., the representative conifer species in Korea. The results were as follows ; 1. The compression strength parallel to grain increased with the increase of tracheid length and wall thickness. The strength, however, decreased with the increase of height of uniseriate ray and microfibril angle. 2. The major factors affecting compression strength parallel to grain in heartwood were radial diameter of latewood tracheid and wall thickness of earlywood tracheid but length and tangential diameter of latewood tracheid were the important factors in sapwood.

• The Journal of the Korea Contents Association
• /
• v.13 no.4
• /
• pp.427-439
• /
• 2013

With the fast development of complex science, lots of social networks are studied. We know that the social network is widely applied in analyzing issues in human culture, economics and web sciences. Recently we witness that some researchers began to compare the social network constructed from fiction literatures(literature social network) and the real social network obtained from practice. But we point that previous approaches for literature social network have some drawbacks since they completely depend on the biographical dictionary constructed for a designated literature. So since the previous approach focus on the few important characters and peoples around them, we can not understand the global structure of all characters appeared in the literature at least once. We propose one method to extract all characters appeared in the literature and how to make the social network from that information. Also we newly propose K-critical network by applying frequency of the named characters and the strength of relationship among all textual characters. Our experiment shows that the K-critical measure could be one crucial quantitative measure to compute the relationship strength among characters appeared in the object literature.

• Steel and Composite Structures
• /
• v.17 no.2
• /
• pp.199-213
• /
• 2014

The damage characters of scarf repaired composite laminates subjected to low-velocity impact with various energy levels at different locations are studied experimentally. The results are compared with those of the original laminates which have no initial damage and don't need repair. The impact load-time history of the specimens, the velocity-time curves of the impactor, the post impact compressive strength of the specimens and the C-scan photographs of the damaged regions are obtained. The delamination threshold load and damage character of the specimen section at impact point are also studied. The results have shown that the impact response of a repaired composite laminate is sensitive to the location of the impact. The impact load and the delamination threshold load have shown different characters for specimens with different impact locations. The debonding characters of the adhesive and compressive strength after impact of the specimens are also influenced by impact locations.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.745-750
• /
• 2000

The shear strength of rock discontinuities is very important in many rock engineering project including analysis of tunnel and slope. But shear strength of rock that acquired through discontinuity shear test is different from soil shear test and more complex. Shear strength is effected by the factors which are various, but it is the best influence of filling material and joint roughness. In this research, we studied shear strength characters of natural joint of phillite that was placed importance on joint roughness, JRC is less low than 8.

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.1
• /
• pp.35-40
• /
• 2008

Various characters of the concrete are greatly improved as the effect of the steel fiber. As the improvement effect of the steel fiber, the increment in flexural strength, shear strength, toughness, and impact strength are remarkable, and tenacious concrete is obtained. This paper presents model which can predict mechanical behavior of the structure according to aspect ratio and volume fraction of steel fiber. Experiments on compressive strength, elastic modulus and tensile strength were performed with self-made cylindrical specimens of variable aspect ratios. This paper presents an analytical study on the behavior of a beam specimen with steel fiber reinforced concrete(SFRC). The effect of the SFRC on the crack pattern, failure mode and the flexural behavior of the structure were investigated. The analysis model based on the nonlinear layered finite element method was successfully able to find the necessary amount of steel fibers, tensile steels and beam section which can best approximate flexural strength and ductility of a given conventionally reinforced concrete beam.

• The Journal of the Korea Contents Association
• /
• v.22 no.6
• /
• pp.487-494
• /
• 2022

The purpose of this study is to construct a personality strength-based group counseling program that can have a positive effect on the happiness of pop culture and arts people and to verify its effectiveness. To this end, 16 artists from entertainment agencies and art high schools in Seoul and Gyeonggi-do were recruited and assigned to experimental and control groups, and pre- and post-examinations were conducted on both groups as personality strengths and happiness tests. In order to verify the effectiveness of the program, the experimental group conducted a total of eight personality strength programs once a week and 60 minutes per session, and the control group was ignored. As a result of the study, the personality strength and happiness of the group participating in the program were significantly improved compared to the control group, showing that training to strengthen personality strength can lead a happier life by promoting the happiness of youth pop culture artists. This is meaningful in that it has created a starting point for managing the mental health of pop culture subjects.

• Journal of the Korea Furniture Society
• /
• v.12 no.1
• /
• pp.21-26
• /
• 2001

This study was carried out to get some basic information on mechanical properties of Platanus orientalis L. for the rational utilization of this wood. Relationship of anatomical characteristics with compression strength parallel to grain was analyzed using stepwise regression technique. All possible combination of 8 independent variables were regressed on compression strength parallel to grain. The summarized results in this study were as follows: 1. The compression strength parallel to grain increased with the increase of wood fiber length and wood fiber width. The strength, however, decreased with increase of number of pore per $\textrm{mm}^2$ and tangential diameter of pore. 2. The major factors affecting compression strength parallel to grain in heartwood were length of wood fiber and number of pore $per{\;}{\textrm{mm}^2}$ but width of wood fiber and length of vessel element were the important factors in sapwood.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.94-96
• /
• 2005

This paper is concerned with a fracture strength study of composite adhesive lap joints. The tensile and peel tests were carried out on specimen manufactured hybrid stacked composites such as the polyester and bamboo natural fiber layer. The main objective of the work was to test the failure strength of adhesive bonded joints using hybrid stacked composites with a polyester and bamboo natural fiber layer adjacent to the fiber orientation. From results, the load directional orientation, small amount and low thickness of bamboo natural fiber layer have a good effect on the tensile and peel strength of natural fiber reinforced composites. and these characters are have a great influence on fracture strength and failure shape of adhesive bonded joints using hybrid stacked composites in the difference of fiber orientation.

• Journal of Powder Materials
• /
• v.18 no.5
• /
• pp.406-410
• /
• 2011

Green strength is an important property of powders since high green strength guarantees easy and safe handling before sintering. The green strength of a powder compact is related to mainly mechanical and surface characters, governed by interlocking of the particles. In this study, the effect of powder surface roughness on the green strength of iron powders was investigated using a transverse rupture test. Three-dimensional laser profiler was employed for quantitative analyses of the surface roughness. Two different surface conditions, i.e. surface roughness, of powders were compared. The powders having rough surfaces show higher green strength than the round surface powders since higher roughness leads increasing interlocked area between the contacting powders.