• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.362-371
• /
• 1995

The purpose of this study was to evaluate the shear bond strength between composite resin and glass ionomer cement according to surface treatment methods of glass ionomer cement. Sixty round acrylic cylinders were fabricated. And then, a round undercut cavity(8 mm diameter, 2.5mm depth) was prepared in the center of the every acrylic cylinder. After all cavities were restored by using light-cured glass ionomer cement. A total of sixty acrylic cylinders restored with glass ionomer cement were divided into 4 groups according to surface treatment methods of glass ionomer cement. The surface treatment of each group were as follows : control group : no treatment Group 1 : acid etching Group 2 : sandblasting Group 3 : air-podwer abrasive polishing The composite resin was bonded to glass ionomer cement of each specimens. And the shear bond strength was tested with a universal testing machine at a cross-head speed of 1mm/min and 500kg in full scale. The results were as follows : 1. The sandblasting group(group 2) had the highest shear bond strength with $272.50{\pm}24.96\;kg/cm_2$ and the acid etching group(group 1) had the lowest shear bond strength with $192.89{\pm}29.32kg/cm_2$. 2. The no treated group(control group) had higher shear bond strength than acid etching group(group 1) (p<0.05). 3. The sandblasting group(group 2), air-powder abrasive polishing group(group 3) and no treated group(control group) had higher shear bond strength than the acid etching group(group 1) (p<0.05). 4. The sandblasting group(group 2) and air-powder abrasive polishing group(group 3) had higher shear bond strength than the no treatment group(control group), but there was not significant(p>0.05).

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.351-361
• /
• 1995

The purpose of this study was to evaluate the shear bond strength of the composite resin bonded on the bleached enamel surface according to its surface treatment. 90 extracted human premolars were divided into six groups. : enamel unbleached (control group) and enamel bleached with 15% carbamide peroxide for 2 weeks (experimental groups: 1, 2, 3, 4 and 5). The surface of bleached enamel in all experimental groups was treated by following manners. Experimental group 1 : catalase immersion for 3 mimutes. Experimental group 2 : catalase immersion for 15 mimutes. Experimental group 3 : artificial saliva immersion for 1 hour. Experimental group 4 : artificial saliva immersion for 48 hours. Experimental group 5: surface reduction of the bleached enamel about 0.5mm-1mm with superfine diamond bur. Composite resin molds(3mm height, 3mm diameter) were bonded to the untreated enamel and treated. The shear bond strengths of composite resin bonded to enamel of each specimen were tested with universal testing machine at a crosshead speed of 5mm/min and 500Kg in full scale and analyzed statistically. The following results were obtained : 1. Control group had the highest shear bond strength with $19.92{\pm}5.14$ MPa and experimental group 5 had the lowest shear bond strength with $11.15{\pm}4.23$ MPa. 2. Control group showed significant differences in shear bond strength with experimental group 1(P<0.05). 3. Control group showed significant differences in shear bond strength with experimental group 5(P<0.05). 4. Experimental group 4 showed significant differences in shear bond strength with experimental group 5(P<0.05). 5. Experimental group 3 showed no significant differences in shear bond strength with experimental group 4(P<0.05).

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.2
• /
• pp.211-220
• /
• 2020

Purpose : The purpose of the present study is to examine the effects of VR training with FES on improving the muscle strength, AROM, and function of the upper limb joints in patients with chronic stroke. Methods : The present study makes use of a pre-post control group design. Thirty patients with chronic stroke were randomly assigned to two groups according to treatment method - the VRFES group and the control group. The VRFES group received 15 minutes of VR training and 15 minutes of FES treatment. The control group received 15 minutes of conservative physical therapy and 15 minutes of VR training. All subjects received 30 minutes of treatment, three times a week, for eight weeks, which amounted to 24 sessions of training. The muscle strength, AROM, and function of the upper extremities were measured before the training and eight weeks after. Upper limb muscle strength was tested using the Digital Manual Muscle Tester while AROM was measured using the Digital Dual Inclinometer. The clinical assessment tools for upper extremity function included the use of the Manual Function Test and the Jebsen-Taylor Hand Function Test. Results : Both groups exhibited great improvements in muscle strength and upper extremity function during the intervention period. The VRFES group exhibited a significant difference in muscle strength, AROM, and function of the upper extremities in comparison with the control group(p<.05). Our results reveal that VRFES is more effective for the muscle strength, AROM, and function of the upper extremities in patients with chronic stroke. Conclusion : VRFES treatment will be used as an important intervention for improving the muscle strength, AROM, and function of the upper extremities in patients with chronic stroke and achieving the functional recovery of the upper extremities.

• Advances in concrete construction
• /
• v.3 no.4
• /
• pp.283-293
• /
• 2015

This paper presents the effects of elevated temperatures of $400^{\circ}C$ and $800^{\circ}C$ on the residual compressive strength and failure behaviour of fibre reinforced concretes and comparison is made with that of unreinforced control concrete. Two types of short fibres are used in this study e.g., steel and basalt fibres. The results show that the residual compressive strength capacity of steel fibre reinforced concrete is higher than unreinforced concrete at both elevated temperatures. The basalt fibre reinforced concrete, on the other hand, showed lower strength retention capacity than the control unreinforced concrete. However, the use of hybrid steel-basalt fibre reinforcement recovered the deficiency of basalt fibre reinforced concrete, but still slightly lower than the control and steel fibres reinforced concretes. The use of fibres reduces the spalling and explosive failure of steel, basalt and hybrid steel-basalt fibres reinforced concretes oppose to spalling in deeper regions of ordinary control concrete after exposure to above elevated temperatures. Microscopic observation of steel and basalt fibres surfaces after exposure to above elevated temperatures shows peeling of thin layer from steel surface at $800^{\circ}C$, whereas in the case of basalt fibre formation of Plagioclase mineral crystals on the surface are observed at elevated temperatures.

• Journal of Korean Clinical Nursing Research
• /
• v.22 no.1
• /
• pp.10-19
• /
• 2016

Purpose: This study was to develop a fall prevention program and test the effects of the program on the muscle strength, postural balance and fear of falling for elderly. Methods: This study was conducted using a nonequivalent control group pretest-posttest design. There were 21 participants in the experimental group and 22 in the control group. Data were collected from July to September 2015. Questionnaires were completed three times (at pretest and after 8 and 10 weeks). Data were analyzed using $x^2$ test, Fisher's exact test, t-test, and repeated measure ANOVA. Results: Lower extremity muscle strength and postural balance scores were significantly improved in the experimental group compared to the control group. However, fear of falling was not significantly different between the experimental and control groups. Conclusion: The study results indicate that fall prevention programs for the elderly can be useful to improve muscle strength and postural balance.

• Advances in concrete construction
• /
• v.7 no.2
• /
• pp.75-85
• /
• 2019

The present study is focused on the mechanical and durability properties of ternary blended cement concrete mix of different grades 30 MPa, 50 MPa and 70 MPa. Three mineral admixtures (fly ash, silica fume and lime sludge) were used as a partial replacement of cement in the preparation of blended concrete mix. The durability of ternary blended cement concrete mix was studied by exposing it to acids HCl and $H_2SO_4$ at 5% concentration. Acid mass loss factors (AMLF), acid strength loss factor (ASLF) and acid durability factor (ADF) were determined, and the results were compared with the control mix. Chloride ions penetration was investigated by conducting rapid chlorination penetration test and accelerated corrosion penetration test on control mix and ternary blended cement concrete. From the results, it was evident that the usage of these mineral admixtures is having a beneficiary role on the strength as well as durability properties. The results inferred that the utilization of these materials as a partial replacement of cement have significantly enhanced the compressive strength of blended concrete mix in 30 MPa, 50 MPa and 70 MPa by 42.95%, 32.48% and 22.79%. The blended concrete mix shown greater resistance to acid attack compared to control mix concrete. Chloride ion ingress of the blended cement concrete mix was low compared to control mix implying the beneficiary role of mineral admixtures.

• Architectural research
• /
• v.25 no.3
• /
• pp.53-59
• /
• 2023

Concrete is widely used in the construction industry; however, it has the disadvantage of deteriorating durability due to cracks occurring because of climate change and shrinkage. In addition, when cement is used as a binder, CO₂ emitted during the manu-facturing process accounts for ~8% of global CO₂ emissions. In this study, ecofriendly cementitious materials such as blast furnace slag powder and fly ash (FA) were used as cement substitutes in the production of mortar containing a chitosan-based polymer (CP), and their fluidity, compressive strength, and self-healing performance were examined. The 28-day compressive strength of the control sample was ~32.4 MPa (the lowest for all tested samples), while that of the sample containing 5% CP and 20% FA was ~49.6 MPa (the highest for all tested samples) and ~53.1% higher than that of the control sample. Even at a healing age of 56 days, the control sample exhibited the lowest healing performance, whereas the samples containing CP (5%, 10%) and 20% FA demonstrated excellent healing performance. After 28 days, the decrease in crack size for the control sample was minimal; however, for the sample containing only cement and CP, a significant decrease in crack size was observed even after 28 days. This study confirmed that the appropriate use of CP and cementitious materials improves not only compressive strength but also the selfhealing performance of mortar.

• Research in Community and Public Health Nursing
• /
• v.6 no.1
• /
• pp.55-73
• /
• 1995

An Effect of Muscle Strength Training Program on Muscle Strength, Muscle Endurance, Instrumental Activities of Daily Living and Quality of Life in the Institutionalized Elderly Recent statistics shows that the aged are the fastest growing segment of our population by increasing life span. The age group of over 60 shows multiple health problems and the most serious handicapping problem of these. are related to the changes in muscular skeletal system. With aging, people lose. their muscle mass and muscle strength resulting from biological changes and physical inactivity. Studies documented a 30-50% loss of muscle mass in an advanced age and thus, ordinary life activities can be seriously affected due to weakened muscle strength. Preservation of muscle strength of lower limb is especially important in the aged. Since it is readily affected from reduced physical activity in old age, sometimes to the detriment of moving or walking. So muscle strength exercise program designed for the elderly to improve leg muscle strength and leg muscle endurance. The research design used was nonequivalent control group pretest - protest design. The purposes of this study were to test the effect of muscle strength exercise program utilizing Leg Press on muscle strength, muscle endurance, instrumental activities of daily living(IADL), cognitive perceptual variables and quality of life. Forty nine subjects participating in this study consisted of twenty four male and twenty five female. Twenty four experimental group subjects were selected from C-institution in Chung Buk province, and twenty five control group subjects were selected from O-institution in Chung Nam province. The mean age of subjects was 72.8 years. Muscle strength training program utilizing Leg Press for the experimental group was carried out three times a week for 9 weeks. The data was collected from August, 1993 to October, 1993. Data were analyzed with $X^2-test$, t-test, ANCOVA test, Kruskal Wallis 1-Way ANOVA test using SPSS PC program. Results were obtained as follows : 1) The experimental group showed significantly higher scores on muscle strength (leg lift strength, back lift strength and grip strength) and muscle endurance than control group after the experiment $\ulcorner$F=52.35(p=.001), F=54.07(p=.001), F=6.97(p=.011), F=18.17(p=.001)$\lrcorner$ 2) Experimental group were significantly higher scores on IADL than control group(F=7.51, p=.009). 3) Experimental group showed significantly higher scores on economical state and self esteem aspects of the quality of life scale than control group $\ulcorner$F=10.59(p=.002), F=6.97(p=.011)$\lrcorner$. But there were no differences in emotional state, physical and functional state and relationship with reatives in the quality of life between groups. 4) Scores on IADL showed a significant difference with the level of muscle strength and muscle endurance $\ulcornerx^2=7.73(p=.025),\;x^2=8.86\;(p=.011)\lrcorner$ 5) Scores on self esteem and physical and functional state aspects of the quality of life scale showed a significant difference with the level of IADL $\ulcornerx^2=11.39(p=.003),\;x^2=9.02(p=.011)\lrcorner$. 6) Scores of experimental group after the experiment in cognitive perceptual variables (perceived benefit on exercise, perceived health status, self efficacy, emotion on exercise) were significantly higher than those of control group $\ulcorner$F=32.09(p=.001), F=5.07(p=.029), F=20.63 (p=.001), F=30.38(p=.001)$\lrcorner$. As a result of this study, the effect of strength training exercise program with Leg. Press had improved muscle strength, muscle endurance, IADL, and the perception of self esteem, physical and funtional state, and economical state. Thus strength training program could be beneficially applied for the prevention of disablity and promotion of health and wellbeing in the aged easily and safely. The subjects in the experimental group have maintained their exercises till six months after the cessation of the experiment. This seem to illustrate that changes in cognitive perceptual variables and the improvement in health status have reinforced motivation for the continuation of voluntary exercises. A further study is necessary to determine the factors affecting maintainance of muscle strength exercise and to assess the effect of weight training program on bone density.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.103-107
• /
• 2022

Scaffolds are the structures that safely protect sensors in various parts of the body. Because of scaffolds must protect sensors from load, the tensile strength of the scaffolds must be higher than 750 kgf/cm². Currently, the tensile strength of scaffolds made with the 3d printer is 714 kgf/cm². We confirm that the tensile strength of the scaffolds increase using air with high nitrogen concentration. In this study, we conducted experiments to find nitrogen concentrations in which the tensile strength of the specimen is higher than 750 kgf/cm². The nitrogen control device and the nitrogen concentration sensor were installed in the chamber type 3d printer. The nitrogen concentration inside the 3d printer was changed by 5 % from 80 % to 100 %. Specimens of ASTM D 638 standard were produced under changed nitrogen concentration. We measured the tensile strength of specimens. We compared the tensile strength of specimens produced under each nitrogen concentration. We confirmed that when air with nitrogen concentration of 90 % was used, the tensile strength of scaffolds were 762 kgf/cm².

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.254-266
• /
• 1997

This study was to know the usefulness of argon laser for composite resin, to prove the polymerized effect of heat treatment of composite resin inlay and to get the curing method for optimal physical properties of composite resin inlay. In this study we used four light curing units and one heat curing unit: Visilux $II^{TM}$, a visible light gun: $SPECTRUM^{TM}$, an argon laser: Unilux AC$^{(R)}$ and Astorn XL$^{(R)}$, visible light curing unit: CRC-$100^{TM}$ for heat treatment. Compared to a control group, we divided the experemental groups into five as follows: Control group: Light curing(Visilux $II^{TM}$) Experimental group 1 : Light curing(Visilux $II^{TM}$) + Light curing(Unilux AC$^{(R)}$) Experimental group 2: Light curing(Visilux $II^{TM}$) + Light curing(Astron XL$^{(R)}$) + Heat treatment(CRC-$100^{TM}$) Experimental group 3 : Laser curing($SPECTRUM^{TM}$) Experimental group 4 : Laser curing($SPECTRUM^{TM}$) + Light curing(Unilux AC$^{(R)}$) Experimental group 5 : Laser curing($SPECTRUM^{TM}$) + Light curing(Astron XL$^{(R)}$) + Heat treatment (CRC-$100^{TM}$) According to the above classification, we made samples through the curing of Clearfil CR Inlay$^{(R)}$, which is a composite resin for inlay, in a separable cylindrical metal mold and polycarbonate plate. And then, we measured and compared the value of compressive strength, diametral tensile strength and the surface micro hardness of each sample. The results were as follows : 1. Among the experimental groups, group 5 showed the highest value of compressive strength, $157.50{\pm}10.24$ kgf and control group showed the lowest value of compressive strength, $103.93{\pm}21.93$ kgf. Control group showed significant difference with the experimental groups(p<0.001). Group 2 which was treated by the heat showed higher compressive strength than that of group 1 which was not, and there was significant difference between group 1 and group 2(p<0.001). Group 5 which was treated by heat showed higher compressive strength than group 4 which was not, and there was significant difference group 4 and group 5(p<0.001). 2. Among the experimental groups, group 5 showed the highest value of diametral tensile strength, $95.84{\pm}1.97$ kgf and control group showed the lowest value of diametral tensile strength, $81.80{\pm}2.17$ kgf. Control group which was cured by visible light showed higher diametral tensile strength than group 3 which was cured Argon Laser. Group 2 which was treated by heat showed higher compressive strength than that of group 1 which was not, and there was significant difference between group 1 and group 2(p<0.001). Group 5 which was treated by heat showed higher compressive strength than group 4 which was not, and there was a significant difference group 4 and group 5(p<0.001). 3. Among the experimental groups, group 5 showed the highest value of microhardness of top surface, $148.42{\pm}9.57$ kgf and control group showed the lowest value of microhardness, $111.43{\pm}7.63$ kgf. In the case of bottom surface, group 5 showed the highest value of $146.19{\pm}7.62$ kgf, and control group showed the lowest, $104.03{\pm}11.05$ kgf. Group 3 which was cured by Argon Laser showed higher diametral tensile strength than control group which was cured only with a visible light gun. Group 2 which was treated by heat showed higher compressive strength than that of group 1 which was not, and there was a significant difference between group 1 and group 2(p<0.001). Group 5 which was treated by heat showed higher compressive strength than group 4 which was not, and there was a significant difference group 4 and group 5(p<0.001). 4. According to the above results, we took a conclusion that argon laser can be used as a useful unit for curing the composite resin and heat treatment can improve the physical properties of the composite resin inlay.