• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.12
• /
• pp.627-632
• /
• 2001

There are claims that ESE(Early streamer emission) Air terminals offer a vastly increased zone of protection over that of traditional lightning rods by causing the emission of an upward streamer/leader that will propagate towards the tip of downward leader at an early stage in the attachment process than would occur for a simple rod in the same geometrical configurations. This paper shows the results of comparing test a particular type of ESE air terminals with a simple rod conducted in the KEH HV laboratory, which are lightning impulse voltage test, flashover direction test and corona emission current measurement. The results from this test show a completely random scattering of flashovers to the conventional and ESE air terminals under identical electrics] and geometrical conditions, and thus shows no advantage of one terminal over the other.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2109-2111
• /
• 2005

The effect of arc like streamer discharge is investigated on the hydrogen generation in the plasma reactor with multineedle - plate electrode geometry and SDR (Plasma reactor using the surface discharge). An additive of the two type (the saw type and the pellet type) was placed under the water surface to investigate the effect of the water surface conditions. The experimental results are compared in case of the reactor with and without an additive on the water surface. The generation of arc streamer discharge is more powerful with increasing applied voltage in the saw type. The maximum hydrogen Production concentration is about 4300 ppm at 74W in the SDR with additive of the saw type. Also, the Energy yield of the SDR (28990 g/kWh, 4300ppm, 74W) is higher than of the multineedle - plate electrode geometry (20892g/kWh, 3300ppm, 77W).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.2
• /
• pp.371-391
• /
• 2023

This study examines the impact of live commerce characteristics on customer responses in the ELM perspective. Based on ELM, the central route is composed of information completeness, accuracy, and currency, and the peripheral route is composed of streamer credibility, streamer reputation, social presence, and system quality. An online survey of female customers aged 20 to 49 who have purchased beauty products through live commerce within the past three months was conducted. The results demonstrate that information completeness and information currency exert significant impact on perceived usefulness and enjoyment. Social presence and system quality also exert significant impact on perceived usefulness and enjoyment. Moreover, perceived usefulness and enjoyment had significant impact on behavioral intention. The effect of information completeness on perceived usefulness and enjoyment was much stronger for high product involvement groups. Furthermore, the effect of streamer reputation on perceived enjoyment was much stronger for high product involvement groups. In contrast, the effect of social presence on perceived usefulness and enjoyment was much stronger for low product involvement groups. This study suggests theoretical implications for applying ELM to live commerce and practical implications for differentiated live commerce marketing strategies.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.50-58
• /
• 2005

Recently, the imaging of geological structures beneath water-covered areas has been in great demand because of numerous tunnel and bridge construction projects on river or lake sites. An electrical resistivity survey can be effective in such a situation because it provides a subsurface image of faults or weak zones beneath the water layer. Even though conventional resistivity surveys in water-covered areas, in which electrodes are installed on the water bottom, do give high-resolution subsurface images, much time and effort is required to install electrodes. Therefore, an easier and more convenient method is sought to find the strike direction of the main zones of weakness, especially for reconnaissance surveys. In this paper, we investigate the applicability of the streamer resistivity survey method, which uses electrodes in a streamer cable towed by ship or boat, for delineating a fault zone. We do this through numerical experiments with models of water-covered areas. We demonstrate that the fault zone can be imaged, not only by installing electrodes on the water bottom, but also by using floating electrodes, when the depth of water is less than twice the electrode spacing. In addition, we compare the signal-to-noise ratio and resolving power of four kinds of electrode arrays that can be adapted to the streamer resistivity method. Following this numerical study, we carried out both conventional and streamer resistivity surveys for the planned tunnel construction site located at the Han River in Seoul, Korea. To obtain high-resolution resistivity images we used the conventional method, and installed electrodes on the water bottom along the planned route of the tunnel beneath the river. Applying a two-dimensional inversion scheme to the measured data, we found three distinctive low-resistivity anomalies, which we interpreted as associated with fault zones. To determine the strike direction of these three fault zones, we used the quick and convenient streamer resistivity.

• 전기의세계
• /
• v.27 no.4
• /
• pp.3-6
• /
• 1978

(차례) 1.기체방전형식의 분류 2.기체방전기구 (1)Streamer (Primary와 Secondary) (2)Leader (3)Return Stroke와 Spark 3.문제점

• Journal of the Korean Society of Combustion
• /
• v.8 no.1
• /
• pp.9-16
• /
• 2003

Carbon soot emission from combustion processes, especially from diesel engines, is a subject of growing concern since soot is known to seriously affect human health. Efforts have been made to oxidize soot particles utilizing Non-Thermal Plasma(NTP) techniques. When oxygen is carried into a plasma device, electrons generated by the plasma dissociate the oxygen, resulting in the formation of oxygen atoms. These highly activated atoms, called O radicals, are known as strong oxidizing agent. This paper presents concentration variations of CO and $CO_2$ at the exit of the plasma device, resulting from the soot oxidation by O radicals, with variations of inlet oxygen concentration, gas temperature, and gas flow rate. Based on the data, Arrehenious rate constants of reactions between C(s)+O and C(s)+O+O were proposed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.1061-1064
• /
• 2001

Deep Interests have been paid on the application of non-thermal plasma technique to solve the environmental pollution problems. $CO_2$, is one of the severe pollutants which cause the acid rain and global warming. In this study, in order to improve the conversion efficiency of $CO_2$, the streamer corona discharge plasma and barrier discharge plasma reactors were made, and the conversion characteristics of $CO_2$by the corona discharge plasma and some discharge characteristics of these discharge chambers are studied experimentally.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.904-907
• /
• 2002

In this study, the plasma-assisted $CO_2$ conversion characteristics were investigated in the streamer corona discharge and silent discharge reactors with dielectric of $Al_2O_3$, to improve the conversion efficiency $CO_2$. Some discharge characteristics of $CO_2$ as parameters of gap spacing and applied voltage frequency, in both corona and silent discharge reactor were also obtained. The maximum $CO_2$ conversion rate was 10.1 [%] under the 5.2 [W] of discharge power and 250 [Hz] of applied voltage frequency.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1649-1651
• /
• 2001

The effect of ribbed spacers having metallic particle attached to the post-type spacer on dielectric breakdown phenomena has been investigated using electric field analysis for imaginary streamer process and a breakdown experiment. It was described that the electric field analysis and the dielectric breakdown test were performed on the case that the particle was attached to the various position of the ribbed spacer having various shapes. As a result, the breakdown voltage of the spacer with two ribs was highest, and it was varied by the length and the thickness of the rib. Especially, in case of the rib with round edge, the breakdown voltage was higher than that with rectangular edge, which complied with the result through the field analysis.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.365-371
• /
• 2004

디지털 기술의 급속한 발전으로 디지털 방송에 대한 여러 가지 요소기술과DTV가 곧 상용화 될 전망이다. 본 연구는 대용량 DVD 저장매체를 이용하여 3D 1-n급 방송 스트림을 송출하기 위한 시스템 설계에 관한 것이다. HD급 방송 스트림을 위한 HDD 및 여러 가지 저장매체를 통해 영상 데이터를 억세스를 하지만 데이터 보관방법상의 문제점과 디스크의 원리상 데이터 억세스를 균일하게 처리하지 못하여 발생하는 인터페이스 동기 불일치 등의 문제점이 있다. 그러므로 DVD 매체를 통한 저장방법 및 억세스의 균일함을 제공하고, 송출 출력을 2.4Mpds 인터페이스 고정시켜 응용 프로그램에서 미디어 정보를 MMIO DMA방식으로 버퍼링하므로써 스트림을 재생할 때 동기 등의 문제점을 해결하였으며, 또한 PCI 컨트롤러는 FPGA VHDR coding하여 PC의 3D-Streamer 응용 프로그램의 명령 신호로 제어를 한다. 이 명령에 따라 3D-Streamer는 3차원 입체영상적인 영상출력을 SMTPE-310M으로 출력하거나 8 DVB 모드로 출력을 하게 된다. 따라서 DVD 전송 직병렬 인터페이스로서 다른 셋톱 장치 및 스트림 전송 장치와 데이터 호환을 이루게 된다.