• 천문학회지
• /
• 제39권4호
• /
• pp.139-145
• /
• 2006

We have made a comprehensive statistical study on the coronal mass ejections(CMEs) associated with helmet streamers. A total number of 3810 CMEs observed by SOHO/LASCO coronagraph from 1996 to 2000 have been visually inspected. By comparing their LASCO images and running difference images, we picked out streamer-associated CMEs, which are classified into two sub-groups: Class-A events whose morphological shape seen in the LASCO running difference image is quite similar to that of the pre-existing streamer, and Class-B events whose ejections occurred in a part of the streamer. The former type of CME may be caused by the destabilization of the helmet streamer and the latter type of CME may be related to the eruption of a filament underlying the helmet streamer or narrow CMEs such as streamer puffs. We have examined the distributions of CME speed and acceleration for both classes as well as the correlation between their speed and acceleration. The major results from these investigations are as follows. First, about a quarter of all CMEs are streamer-associated CMEs. Second, their mean speed is 413 km $s^{-1}$ for Class-A events and 371 km $s^{-1}$ for Class-B events. And the fraction of the streamer-associated CMEs decreases with speed. Third, the speed-acceleration diagrams show that there are no correlations between two quantities for both classes and the accelerations are nearly symmetric with respect to zero acceleration line. Fourth, their mean angular width are about $60^{\circ}$, which is similar to that of normal CMEs. Fifth, the fraction of streamer-associated CMEs during the solar minimum is a little larger than that during the solar maximum. Our results show that the kinematic characteristics of streamer-associated CMEs, especially Class-A events, are quite similar to those of quiescent filament-associated CMEs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.223-225
• /
• 2005

This paper presents a novel prototype of a current source resonant inverter using insulated gate bipolar transistors for driving a streamer reactor, streamer generation technology has been recognized as one of the best methods for water treatment, disinfection, industrial wastes utilization, and so on. However, some technological difficulties related to efficient streamer production have been significant problems restricting streamer usage in the industrial plants. Introduced in this paper is a pulse density modulated high frequency inverter for a plasma generate, which is developed with the aim to improve power conversion and control characteristics of the streamer reactor by using advances in power electronic technology. The developed system implements the feedforward control-based pulse density modulation control scheme with pulse width modulation feedback control strategy to compensate temperature and other environmental influences on streamer discharge.

• Journal of Electrical Engineering and Technology
• /
• 제5권1호
• /
• pp.156-162
• /
• 2010

This paper describes electrical and optical characteristics of discharge developments in water under inhomogeneous fields caused by impulse voltages. Predischarge current and discharge light images were observed for different water resistivities and applied voltages between the hemispherical water tank and the needle electrode. The electrical parameters characterizing discharge developments are analyzed based on the discharge light images and voltage-current (V-I) curves, and electrical resistances derived by voltage and current waveforms. As a result, when the streamer corona is initiated at the tip of the needle electrode, the transient resistance suddenly drops and V-I curves form a 'loop'. The length of streamer propagation is increased with increasing peak value of the applied voltage, and the streamer corona extension is enlarged with increasing water resistivity. The electrical resistances before streamer corona initiation are rarely changed by different applied voltages. On the other hand, the electrical resistances after streamer corona initiation are found to be inversely proportional to the peak value of the applied voltage, and the decreasing rates for higher water resistivities are much higher than those for lower water resistivities. The time to streamer corona initiation and the time to the second current peak become shorter as the voltage increases. Finally, the calculated resistances after streamer corona initiation are almost the same trace of measured resistances, but they are smaller than the measured values.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.239-241
• /
• 2007

In this paper we describe streamer propagations characterizing underwater pre-breakdown and breakdown behaviour under impulse voltages. Streamer corona branches in lower resistivities are much thicker and brighter than those in higher resistivities. The negative streamer channels not only have more branches but also widely spread out than the positive streamer channels. The succession of streamer coronas during re-breakdown produces a stepwise propagation. The pre-breakdown currents consist of the conduction current and streamer corona current pulses.

• 한국안전학회지
• /
• 제29권6호
• /
• pp.46-48
• /
• 2014

This paper compared and demonstrated the performance of the earth plate for conventional type and early streamer discharging type developed a new plate in order to improve the performance of the ground plate for use in grounding. The results obtained are shown below; early streamer discharge earth plate was high 5 kV on DC flashover voltage and corona discharge current was higher than about 2 times under the same test conditions compared to the conventional earth plate. From the experiential result, streamer discharge earth plate had a function of rapid inflow/out flow than the general ground plane because of by corona discharge current to be generated in the sharp serrated in formed the ground plane when strike current occurred. In the future, the newly developed early streamer discharge ground plate would be beneficial for grounding work to be widely used to promote the convenience and economy of construction.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.506-506
• /
• 2012

플라즈마 제트 장치를 이용하여 두 개의 플라즈마 plume을 평행하게 발생시킨다. 두 개의 플라즈마 plume의 전위차를 전극에서부터 plume 끝단까지 위치별로 측정한다. 두 개의 플라즈마 제트 장치에 인가하는 전압의 위상이 서로 반대일 경우, 두 개의 플라즈마 plume의 전위차로 인하여 plume사이에 streamer가 발생한다. 대기압에서 streamer가 발생하려면 십여 kV 이상의 전위차가 있어야 한다. 반대로 동일한 위상의 전압을 인가할 경우, 두 개의 플라즈마 plume의 전위차는 없기 때문에 plume사이에 streamer가 발생하지 않는다. 두 개의 플라즈마 제트 장치를 등가회로로 구성하고 위상차로 인한 streamer 발생여부를 확인한다. 그리고 두 개의 플라즈마 plume 사이에 발생한 streamer와 플라즈마 제트 장치를 등가회로로 구성하여 발생시킨 streamer 양을 비교한다. 이를 통해 플라즈마 plume의 전위차를 확인한다.

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.1-6
• /
• 2004

High-resolution S-wave reflection surveying has been successfully conducted on paved areas using a Land Streamer originally designed by the author. The main feature of the Land Streamer tool is the non-stretch woven belt on which geophone units are mounted to form a multichannel geophone array similar to a marine streamer. Because it is easily towed by a vehicle or by hand, the tool leads to high performance in field measurements and resultant cost-effectiveness of high-resolution reflection surveys. Although each geophone unit is coupled to the pavement through a metallic baseplate instead of being firmly planted in the ground, the Land Streamer tool provides comparatively clean data, unaffected by traffic noise even on the pavement. Thus, the tool is capable of expanding the opportunity for S-wave reflection surveys in urban areas where many surfaces are paved and traffic noise is severe. A series of high-resolution S-wave reflection surveys on paved areas delineated detailed structures of surface layers shallower than 60 m, and proved the wide applicability of the tool to engineering, environmental applications, and earthquake disaster prevention projects.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권5호
• /
• pp.232-237
• /
• 2001

The transition avalanche to streamer are presented in atmospheric pressure nitrogen. The results of two-dimensional simulation are obtained by using finite Elements Method combined with Flux Corrected Transport algorithm(FEM-FCT). We modeled the negative streamer which enables to propagate with out and with photoionization. The results of simulation without photoionization and with photoionization are compared. We show that photoionization plays important roles not only in streamer formation but also in streamer propagation.

• 인터넷정보학회논문지
• /
• 제7권3호
• /
• pp.107-118
• /
• 2006

네트워크 인프라의 성장과 디지털 영상압축 기술의 발달로 네트워크 카메라 서버를 이용한 실시간 영상감시 시스템의 수요가 증가하고 있다. 기존의 CCTV를 이용한 실시간 영상감시에 비해 네트워크 카메라 서버를 이용한 영상감시는 많은 이점이 있다. 본 논문에선 실시간 영상감시 시스템의 핵심 모듈로서 JPEG 영상의 수집과 전달을 담당하는 JPEG Streamer의 모델을 제시하고 이를 설계, 구현한다. JPEG Streamer의 안정성과 효율성을 위해서 쓰레드 풀과 공유 메모리를 사용했다. 실시간 영상의 품질을 높이기 위해서 더블 버퍼링의 개념을 도입했다. 이렇게 구현된 JPEG Streamer를 실시간 영상감시 시스템의 개발에 이용함으로써 생산성을 높일 수 있을 뿐 아니라, 신뢰성과 안정성도 확보 할 수 있다.

• 한국정보통신학회논문지
• /
• 제11권2호
• /
• pp.248-256
• /
• 2007

네트워크 인프라의 성장과 디지털 영상압축 기술의 발달로 네트워크 카메라 서버를 이용한 실시간 영상감시 시스템의 수요가 증가함에 따라 가정이나 소규모 사무실에 적합한 실용화 수준의 보안 시스템에 대한 요구도 함께 증대되고 있다. 기존의 CCTV를 이용한 실시간 영상감시에 비해 네트워크 카메라 서버를 이용한 영상감시는 많은 이점이 있다. 본 논문에선 실시간 영상감시 시스템의 핵심 모듈로서 JPEG 영상의 수집과 전달을 담당하는 JPEG Streamer의 모델을 설계, 구현하며 JPEG Streamer의 안정성과 효율성을 위해서 쓰레드 풀과 공유메모리를 사용하고 실시간 영상의 품질을 높이기 위해서 더블버퍼링의 개념도 도입하였다. 또한 제시된 Streamer의 모델을 이용하여 개인 휴대단말기(PDA)로 무선 인터넷을 통해 실시간 영상을 전송하는 무선 영상 감시시스템을 제시한다.