• Journal of the Korean Geosynthetics Society
• /
• v.12 no.4
• /
• pp.45-56
• /
• 2013

Recently, offshore wind farms are increasingly expected, because there are huge resource and large site in offshore. Jeju island has optimum condition for constructing a wind energy farm. Unlike the mainland, Jeju island has stratified structure distribution between rock layers sediments due to volcanic activation. In these case, it can be occur engineering problems in whole structures as well as the safety of foundation as the thickness and distribution of sediment under top rock layer can not support sufficiently the structure. In this paper, the settlement and stress distribution is predicted by numerical analysis when the mono-pile base are constructed on various soft layer between stratified structure. To determine the settlement of the pile foundation supported on stratified rock layer, the geological investigation at the 3 regiions and the results of laboratory experiments of the stratified rock layer is required.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1057-1062
• /
• 2008

In order to investigate a strength anisotrophy of basalt in Cheju Island, rock samples of Pyosenri basalt, trachy-basalt and scoria were taken from Seoguipo-Si Seongsan-Eup area, and a series of uniaxial compressive strength test and Brazilian test were carried out. The strengths were decreased with increasing the moisture contents in rock sample by pore water. As the result of test considering the anisotropy of rock strength, the compressive strength in condition of failure occurred parallel to stratified layer is decreased about 12-26% more than that in condition of failure occurred inclined to stratified layer.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2411-2425
• /
• 2013

In the design of pile foundation on the rock layer in the stratified structure with sedimentary and rock layers, the structural analysis of the stratified rock layer is required to determine the failure modes (flexural failure, punching shear failure or end bearing failure) and the bearing capacity of the rock layer. However, the existing usable Elastic Plate Analysis Method (EPAM) suggested by ACI committee 436 and Korean Code Requirements for Structural Foundation Design is very complex, and engineers have many difficulties in using it. Therefore, in this research, we proposed the relatively simple Circular Foundation Analysis Method (CFAM) with the concept and the equation of the equivalent effective width (radius) instead of the complex EPM, and the related equations of bending moment and shear force to be equal to the analysis results of EPAM. As a result, the proposed CFAM using the equivalent effective width (radius) is simple and convenient to use, and the analysis results of it are very good in their accuracies comparing those of EPAM and Finite Element Method.

• Geotechnical Engineering
• /
• v.36 no.6
• /
• pp.48-65
• /
• 2020

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.3
• /
• pp.51-62
• /
• 2017

For the purpose of the study, of the 76 areas subject to preliminary concentrated management on sediment disaster in the downtown area, 9 areas were selected as research areas. They were classified into three stratified rock areas (Gyeongsan City, Goheung-gun and Daegu Metropolitan City), three igneous rock areas (Daejeon City, Sejong Special Self-Governing City and Wonju City) and three metamorphic rock areas (Namyangju City, Uiwang City and Inje District) according to the characteristics of the bedrock in the research areas. As for the 9 areas, analyses were conducted based on tests required to calculate soil characteristics, a predictive model for root adhesive power, loading of trees and on-the-spot research. As for a rainfall scenario (rainfall intensity), the probability of rainfall was applied as offered by APEC Climate Center (APCC) in Busan. As for the prediction of landslide risks in the 9 areas, TRIGRS and LSMAP were applied. As a result of TRIGRIS prediction, the risk rate was recorded 30.45% in stratified rock areas, 41.03% in igneous rock areas and 45.04% in metamorphic rock areas on average. As a result of LSMAP prediction based on root cohesion and the weight of trees according to crown density, it turned out to a 1.34% risk rate in the stratified rock areas, 2.76% in the igneous rock areas and 1.64% in the metamorphic rock areas. Analysis through LSMAP was considered to be relatively local predictive rather than analysis using TRIGRS.

• The Journal of Engineering Geology
• /
• v.18 no.2
• /
• pp.215-225
• /
• 2008

In order to investigate the influence factors to compressive and tensile strength of basalt in Cheju Island, rock samples of Pyosenri basalt, trachy-basalt and scoria were taken from Seoguipo-Si Seongsan-Eup area, and a series of uniaxial compressive strength test and Brazilian test were carried out. Especially, these tests were performed in consideration of the loading speed, the moisture content in rock sample, and the anisotropy of rock strength. The uniaxial compressive strength was increased gradually as the loading speed rose. The increasing quantity of uniaxial compressive strength had a difference in each rock types. Also, the strength was decreased with increasing the moisture contents in rock sample by pore water. As the result of test considering the anisotropy of rock strength, the compressive strength in condition of failure occurred parallel to stratified layer is decreased about 12-26% more than that in condition of failure occurred inclined to stratified layer.

• Journal of Korean Elementary Science Education
• /
• v.33 no.2
• /
• pp.258-272
• /
• 2014

The purpose of this study is to investigate the perception on sedimentary rock in elementary science 'Earth and Space' domain for elementary school students. For this purpose, questionnaires on the sedimentary rock perception were developed. And the sedimentary rock perception was examined for random sampling of 5th and 6th grade 656 students. As a result, students chosen incorrect answers of the average 53.8% for questions of sedimentary rock perception. Over the average rate of incorrect answers in 18 questions were 10 questions (3 in the creation of sedimentary rock, 5 in the classification of sedimentary rock, 2 in the sedimentary layer). When the results were stratified by residence, grade and gender, there were significant differences in 8 questions between students in urban and rural areas, in 6 questions between 5th and 6th grade students, and in 3 questions between male and female students. The study that understanding of elementary students for sedimentary rock can be provided for form the master planning the teaching strategy to student's scientific concepts in elementary school. The results are also contributed to find an effective ways for modify misconceptions of sedimentary rock to the scientific concepts.

• Tunnel and Underground Space
• /
• v.1 no.2
• /
• pp.181-203
• /
• 1991

The effects of geologic structures such as rock joins and bedding planes on the thermal conductivity of a discontinuous rock mass are studied. The expressions for the equivalent thermal conductivities of jointed rock masses are derived and found to be anisotropic. The degree of anisotropy depends primarily on the thermal properties contrast between the joint phase and surrounding intact rock, the joint density expressed as volume fraction and the inclination angle of the joint. Within the context of 2-dimensional finite element heat transfer scheme, the isotherms around a circular hole are analyzed for both the isotropic and anisotropic rock masses in 3 different thermal boundary conditions. i.e. temperature, heat flux and convection boundary conditions. The temperature in the stratified anisotripic rock mass is greatly influenced by the thermal properties of the rock formation in contact with the heat source. Using the excavation-temperature coupled elastic plastic finite element method, analyzed is the thermo-mechanical stability of a circular opening subjected to 10$0^{\circ}C$ at a depth of 527m. It is found that the thermal stress concentration was enough to deteriorate the stability and form a plastic yield zone around the opening, in contrast to the safety factor greater than 2 resulted form the excavation-only analysis.

• Journal of The Geomorphological Association of Korea
• /
• v.15 no.2
• /
• pp.11-24
• /
• 2008

Stratified slope was formed on the SSE-facing slope in the southwest region of Haenam, South Korea. Field and laboratory investigations into the geomorphology and sedimentology of stratified slope deposit that is inactive. Outcrops of this deposit show an alteration of coarse debris-supported matrix and tiny debris-supported matrix layers. Sedimentological analysis(particle-size analysis) indicates that this deposit is not fluvial process or only gravitation like rock-fall. Many clasts and fine materials on the slope is supposed to be product by congelifraction under Pleistocene periglacial climatic environment. Also The processes responsible for the genesis of this deposit probably are to move downward by gelifluction and to remove fine materials by slope wash in thawing cycle and in situ debris congelifraction on gelifluction slope. Now It is impossible to account for the time range of genesis(diurnal, seasonal). In conclusion, this stratified slope formed in cold and humid periglacial environmental in pleistocene, therefore, this slope is a periglacial relic landform, indicates that in south korea there was a cold and humid paleo-climate such as periglacial environmen.

• Tunnel and Underground Space
• /
• v.23 no.1
• /
• pp.78-85
• /
• 2013

A primary objective in creating a stratified thermal storage is to maintain the thermodynamic quality of energy, so thermally stratified energy can be extracted at temperatures required for target activities. The separation of the thermal energy in heat stores to layers with different temperatures, i.e., the thermal stratification is a key factor in achieving this objective. This paper introduces different methods that have been proposed to characterize the thermal stratification in heat stores. Specifically, this paper focuses on the methods that can be used to determine the ability of heat stores to promote and maintain stratification during the process of charging, storing and discharging. In addition, based on methods using thermal stratification indices, the degrees of stratification of stored energy in Lyckebo rock cavern in Sweden were compared and the applicability of the methods was investigated.