• Current Photovoltaic Research
• /
• 제11권4호
• /
• pp.114-117
• /
• 2023

Transparent Photovoltaic (PV) modules have recently been in the spotlight because they can be applied to buildings and vehicles. However, crystalline silicon (c-Si) solar modules, which account for about 90% of the PV module market, have the disadvantage of applying transparent PV modules due to their unique opacity. Recently, a see-through type PV module using a crystalline silicon solar strap has been developed. However, there is a problem due to a decrease in aesthetics due to the metal ribbon in the center of the see-through type PV module and difficulty bonding the metal ribbon due to the low voltage output of the strap. In this study, to solve this problem, we developed a fabrication process of series connected c-Si solar strap cells using the c-Si solar cells. We succeeded in fabricating a series connected strap with a width of 2-10 mm, and we plan to manufacture an aesthetic see-through type c-Si PV module.

• 한국의류산업학회지
• /
• 제16권4호
• /
• pp.635-644
• /
• 2014

This study provides basic reference data for brassiere wearing conditions, design preferences of new silver women (50s-60s) and development of brassiere products. We compiled and compared 163 pieces of brassiere (considering of 105 domestic general brassieres and 58 foreign silver brassieres) analyzed using SPSS Statistics 21 program. A survey was then conducted on the actual wearing, purchasing conditions, design preferences for 176 females (50s-60s). The result of this study are as follows: First, comparing actual product conditions (domestic general products and foreign silver products), the ratio of full cup in cup height, V-shape type in neckline shape, long type in front-end length, wide type in wing width, U-shape type in shoulder strap form, wide type in shoulder strap width, no-wire brassieres in breast wire type, all-in-one type in shoulder strap separation, back type in closure type appeared higher than other types of brassiere in domestic general product. Second, a study also showed that 60s women's wearing time is lower than 50s women's; however, 60s women expressed a higher figure and preference for the purchasing ratio in the department store, full cup in cup height, short type in length of brassieres, wide type in wing width, U-shape in shoulder strap form, small type in shoulder strap width, back type in closure type and no-wire brassieres than those in their 50s. It was found they prefer fabric with a high natural content, nude tone color without decoration & pattern and camisole brassieres.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권1호통권53호
• /
• pp.195-204
• /
• 2009

강판부착공법은 철근콘크리트(RC) 보의 전단내력이 부족한 경우에 일반적으로 사용되는 보강공법 중의 하나이다. 그러나, 기존의 solid형 강판보강공법은 강성이 우수한 반면 취성적 부착파괴, 비효율적인 재료량 및 시공성 등의 문제가 알려져 있으며, 띠형 강판보강공법은 제한된 접착면적과 강판의 비일체적 거동 때문에 보강효과가 낮게 되는 단점이 있다. 따라서, 본 연구에서는 이러한 문제점을 개선할 수 있는 Slit형 강판을 사용하여 전단내력을 보강하는 방법을 제시하고 이 공법의 보강효과를 분석하고자 하였다. 전단경간 내에서 수직 Slit형 강판의 폭, 간격 및 두께를 주요 변수로 하는 13개의 시험체를 제작하였으며, 본 연구의 실험결과 및 기존 띠형 강판으로 전단보강된 RC 보의 실험결과를 비교 분석하고 Slit형 강판공법의 보강효과를 정량적으로 규명하였다. 실험결과, 기존의 개별적 띠형 전단보강방법에 비하여 일체화된 수직 Slit형 강판으로 보강한 경우에 더 높은 전단내력을 보였으며, 이는 강판과 RC 보의 일체성이 높아지고 강판의 부착면적이 증대되기 때문인 것으로 판단된다.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.473-480
• /
• 2013

A new concept design of electromagnetic energy harvester is proposed for powering a tire pressure monitoring sensor (TPMS). The thin coil strap is attached on the circumferential surface of a rim and a permanent magnet is placed on the brake caliper system. When the wheel rotates, the relative motion between the magnet and the coil generates electrical energy by electromagnetic induction. The generated energy is stored in a storage unit (rechargeable battery, capacitor) and used for TPMS operation and wireless signal transmission. Innovative layered design of the strap is provided for maximizing energy generation. Finite Element Method (FEM) and experiment results on the proposed design are compared to validate the proposed design; further, the method for design improvement is discussed. The proposed design is excellent in terms of durability and sustainability because it utilizes the everlasting rotary motion throughout the vehicle life and does not require material deformation.

• 한국의류학회지
• /
• 제42권6호
• /
• pp.924-942
• /
• 2018

This study is to understand the symbolism and meaning of Yeomim in Korean traditional clothing. Throughout the study, literature research and analysis have been conducted along with empirical studies. The results of the study are as follows. First, there are three types of Yeomim for Korean clothing. Various methods of Yeomim use different materials for tying clothes such as straps and buttons. Second, when we investigate how Yeomim of Korean clothing has evolved, left and right type of Yeomim had coexisted in ancient times and Dae had been used mainly to tie clothes. The Yeomim method has used various materials since the Goryeo Dynasty. During the Joseon Dynasty, right type Yeomim dominated with majority using Goreum. Third, Hanbok has consistently evolved with a unique bonding style that uses rectangular strap for Yeomim, from the ancient times. The particular Yeomim method of twisting a rectangular strap represents the circularity of space. In addition, Yeomim with a strap is characterized by the beauty of how its form can be highly flexible depending on the human body or location of Yeomim, which corresponds to an unbalanced and asymmetrical natural beauty unique to Korea.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.960-967
• /
• 2012

The study aims to design the corset type long-line bra patterns that compensate part-somatotype of women in their 20s. The corset type long-line research bra patterns consist of 4 sections: cup, front bodice, back bodice, and shoulder strap. The full cup is made up of 2 lower part pieces and 1 upper part piece, and the shoulder strap is 16 millimeters wide. The method to design the patterns is shown in figure 4 and figure 5. The result of wearing test showed that, while the wearing testers recognized some significant differences in 19 out of 26 criteria, the examiners did in 17 out of 23. The criteria more than 1 in an average value between research bras and commercial bras were 'appropriateness of breadth of shoulder strap', 'appropriateness of pressure of armhole circumference'. 'appropriateness of pressure of waist', 'suitability of side line and body curve', 'appropriateness of positional pressure of chest circumference', 'appropriateness of positional pressure of upper part line', 'appropriateness of positional pressure of bottom part line', and 'satisfaction of whole silhouette of side and back'. The research and commercial bras were evaluated 4.23 and 3.44 respectively by the testers, and 4.25 and 3.40 by the examiners. The former ones were scored higher by both parties. They were also appreciated higher in general silhouettes of fitting and appearance.

• Nuclear Engineering and Technology
• /
• 제38권4호
• /
• pp.375-382
• /
• 2006

Characterization tests (load vs. displacement curve) are conducted for the springs of Zirconium alloy spacer grids for an advanced LWR fuel assembly. Twofold testing is employed: strap-based and assembly-based tests. The assembly-based test satisfies the in situ boundary conditions of the spring within the grid assembly. The aim of the characterization test via the aforementioned two methods is to establish an appropriate assembly-based test method that fulfills the actual boundary conditions. A characterization test under the spacer grid assembly boundary condition is also conducted to investigate the actual behavior of the spring in the core. The stiffness of the characteristic curve is smaller than that of the strap-wised boundary condition. This phenomenon may cause the strap slit condition. A spacer grid consists of horizontal and vertical straps. The strap slit positions are differentiated from each other. They affords examination of the variation of the external load distribution in the grid spring. Localized legions of high stress and their values are analyzed, as they may be affected by the spring shape. Through a comparison of the results of the test and FE analysis, it is concluded that the present assembly-based analysis model and procedure are reasonably well conducted and can be used for spring characterization in the core. Guidelines for improving the mechanical integrity of the spring are also discussed.

• 한국의류학회지
• /
• 제36권11호
• /
• pp.1197-1207
• /
• 2012

This study provides information for the design of pediatric inpatient uniforms with functionality and aesthetic beauty through a questionnaire-survey of the conditions of providing, wearing, preferences and improvement requirements for pediatric inpatient uniforms. As a result of the survey, intravenous injections were mostly given on the back of the hand, and the method of changing uniforms after intravenous injections was (in most cases) to pass the injection bottle through a sleeve or pant leg while the needle is inserted. The respondents answered that the sleeve length and pant length did not match. As a result of the preference of the pediatric inpatient design survey, respondents indicated they preferred pajama type, yellow color and medium size animal patterns. A similar ratio of set-in and raglan with no collar but with 3/4 length sleeve of round neck, front end, sleeve top opening, button closing and two pockets were preferred for shirts; however, a 3/4 length with rubber string on the waist, no opening and inner opening were preferred at the same ratio for pants. As for the method to adjust the length to assign functionality to pediatric inpatient uniforms, the most preferred sleeve was a roll-up sleeve with a strap and the most preferred pants were length adjusted pants that used a strap for both shirts and pants with a both sides strap. In addition, the majority of the respondents answered that a hand wrapper that protects the injection location during intravenous injections needs be developed. As for the development type, a half glove type and glove type were preferred in sequential order.

• 콘크리트학회논문집
• /
• 제21권2호
• /
• pp.159-168
• /
• 2009

본 연구에서는 기존의 연구방법을 개선한 프리스트레스가 도입된 아라미드 스트랩으로 횡 구속된 RC 원형기둥의 일축압축 거동에 대하여 강도와 변위에 의한 강성 및 구속효과에 대하여 연구하였으며, 그 프리스트레싱 보강방법 및 과정에 대하여 비교적 상세히 소개하였다. 이 방법으로 보강된 기둥의 파괴형태는 초기 능동 구속압의 작용으로 인하여 변위 증가율이 매우 낮으며 이후 최종 파괴시까지도 그 형상이 유지되는 매우 안정적인 파괴형태를 보이게 된다. 파괴하중 비교 결과 일반 RC 기둥과 비교하여 73% 이상 강도증진 효과를 나타내었다. 또한 변형 증가율이 매우 작으며 이로 인한 변위구속효과가 매우 우수함을 확인할 수 있었다. 기존의 보강방법 (CFS, GFS)과의 비교를 통하여, 상대적으로 작은 면적으로 우수한 강도증진을 보이며 강성증가로 인한 구속효과 역시 우수하며 체적 증가율도 팽창하지 않는 결과를 보였다. 특히, 콘크리트 팽창 이후부터 발휘되는 기존 방법의 구속효과와는 달리, 초기부터 도입되는 프리스트레스트 긴장력에 의한 초기변형 구속효과가 매우 탁월하며, 최종 파괴시까지 체적 변형률이 팽창하지 않는 안정적인 결과를 나타낸다.

• 한국융합학회논문지
• /
• 제11권3호
• /
• pp.119-126
• /
• 2020

본 연구의 목적은 관성 측정 장치(Inertial Measurement Unit, IMU)의 융합연구 형태와 방법에 대한 연구를 체계적 문헌고찰 방법으로 분석하여 IMU의 형태와 방법에 대한 경향을 파악하고자 한다. 연구수행은 PRISMA(Preferred Reporting Items for Systematic Reviews and Meta-Analyses)가이드라인을 이용하여 수행되었다. 3개의 데이터베이스에서 검색된 630편 중 최종적으로 선정기준에 부합하는 23편을 선정하였다. 본 연구결과 전 세계적으로 IMU를 사용한 다양한 연구를 진행하고 있음을 알 수 있었고, IMU의 형태는 스트랩, 전신 슈트, 벨트, 손목시계, 신발, 장갑이 있었다. 이 중, 스트랩 형태의 IMU가 11편으로 가장 많았다. IMU의 장점인 간소화와 실시간 데이터 수집, 적용의 쉬움으로 작업 활동, 보행, 관절 가동 범위 등의 측정 방법으로 사용되었다. 본 연구의 결과는 IMU의 연구를 진행하는 의료 및 재활 분야의 전문가들에게 기초 자료로 활용될 수 있으리라 기대된다.