• Current Photovoltaic Research
• /
• v.11 no.4
• /
• pp.114-117
• /
• 2023

Transparent Photovoltaic (PV) modules have recently been in the spotlight because they can be applied to buildings and vehicles. However, crystalline silicon (c-Si) solar modules, which account for about 90% of the PV module market, have the disadvantage of applying transparent PV modules due to their unique opacity. Recently, a see-through type PV module using a crystalline silicon solar strap has been developed. However, there is a problem due to a decrease in aesthetics due to the metal ribbon in the center of the see-through type PV module and difficulty bonding the metal ribbon due to the low voltage output of the strap. In this study, to solve this problem, we developed a fabrication process of series connected c-Si solar strap cells using the c-Si solar cells. We succeeded in fabricating a series connected strap with a width of 2-10 mm, and we plan to manufacture an aesthetic see-through type c-Si PV module.

• Fashion & Textile Research Journal
• /
• v.16 no.4
• /
• pp.635-644
• /
• 2014

This study provides basic reference data for brassiere wearing conditions, design preferences of new silver women (50s-60s) and development of brassiere products. We compiled and compared 163 pieces of brassiere (considering of 105 domestic general brassieres and 58 foreign silver brassieres) analyzed using SPSS Statistics 21 program. A survey was then conducted on the actual wearing, purchasing conditions, design preferences for 176 females (50s-60s). The result of this study are as follows: First, comparing actual product conditions (domestic general products and foreign silver products), the ratio of full cup in cup height, V-shape type in neckline shape, long type in front-end length, wide type in wing width, U-shape type in shoulder strap form, wide type in shoulder strap width, no-wire brassieres in breast wire type, all-in-one type in shoulder strap separation, back type in closure type appeared higher than other types of brassiere in domestic general product. Second, a study also showed that 60s women's wearing time is lower than 50s women's; however, 60s women expressed a higher figure and preference for the purchasing ratio in the department store, full cup in cup height, short type in length of brassieres, wide type in wing width, U-shape in shoulder strap form, small type in shoulder strap width, back type in closure type and no-wire brassieres than those in their 50s. It was found they prefer fabric with a high natural content, nude tone color without decoration & pattern and camisole brassieres.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.1 s.53
• /
• pp.195-204
• /
• 2009

Application of steel plates is one of widely used methods for shear strengthening of reinforced concrete beams that are insufficient of shear capacity. While the existing method applying solid steel plates provides good shear rigidity, however, it is concerned by brittle bond failure patterns, inefficient material usage, and low constructability. The use of strap type steel plates has also shortcomings of low strenthening effect due to small interface bonding area and ununified behavior between plates and main body. Therefore, this study aims to introduce the shear strengthening method using slit type steel plate, which can solve out the problems aforementioned, and to verify its strengthening effects on shear capacity. A total of 13 specimens strengthened by slit type steel plates were fabricated with primary test parameters of plate width, slit spacing, and plate thickness. The test results from this study were also compared to those from the existing research on RC beams strengthened by strap type steel plates, and the strengthening effects on shear capacity of specimens having bonded slit type steel plates were quantitatively analyzed. The test results showed that the RC beams strengthened by slit type steel plates had greater shear capacities than those with strap type steel plates, which is considered to be the effects of improved composite behavior and larger interface bonding area in the RC beams strengthened by the slit type steel plates.

• Journal of Magnetics
• /
• v.18 no.4
• /
• pp.473-480
• /
• 2013

A new concept design of electromagnetic energy harvester is proposed for powering a tire pressure monitoring sensor (TPMS). The thin coil strap is attached on the circumferential surface of a rim and a permanent magnet is placed on the brake caliper system. When the wheel rotates, the relative motion between the magnet and the coil generates electrical energy by electromagnetic induction. The generated energy is stored in a storage unit (rechargeable battery, capacitor) and used for TPMS operation and wireless signal transmission. Innovative layered design of the strap is provided for maximizing energy generation. Finite Element Method (FEM) and experiment results on the proposed design are compared to validate the proposed design; further, the method for design improvement is discussed. The proposed design is excellent in terms of durability and sustainability because it utilizes the everlasting rotary motion throughout the vehicle life and does not require material deformation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.6
• /
• pp.924-942
• /
• 2018

This study is to understand the symbolism and meaning of Yeomim in Korean traditional clothing. Throughout the study, literature research and analysis have been conducted along with empirical studies. The results of the study are as follows. First, there are three types of Yeomim for Korean clothing. Various methods of Yeomim use different materials for tying clothes such as straps and buttons. Second, when we investigate how Yeomim of Korean clothing has evolved, left and right type of Yeomim had coexisted in ancient times and Dae had been used mainly to tie clothes. The Yeomim method has used various materials since the Goryeo Dynasty. During the Joseon Dynasty, right type Yeomim dominated with majority using Goreum. Third, Hanbok has consistently evolved with a unique bonding style that uses rectangular strap for Yeomim, from the ancient times. The particular Yeomim method of twisting a rectangular strap represents the circularity of space. In addition, Yeomim with a strap is characterized by the beauty of how its form can be highly flexible depending on the human body or location of Yeomim, which corresponds to an unbalanced and asymmetrical natural beauty unique to Korea.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.960-967
• /
• 2012

The study aims to design the corset type long-line bra patterns that compensate part-somatotype of women in their 20s. The corset type long-line research bra patterns consist of 4 sections: cup, front bodice, back bodice, and shoulder strap. The full cup is made up of 2 lower part pieces and 1 upper part piece, and the shoulder strap is 16 millimeters wide. The method to design the patterns is shown in figure 4 and figure 5. The result of wearing test showed that, while the wearing testers recognized some significant differences in 19 out of 26 criteria, the examiners did in 17 out of 23. The criteria more than 1 in an average value between research bras and commercial bras were 'appropriateness of breadth of shoulder strap', 'appropriateness of pressure of armhole circumference'. 'appropriateness of pressure of waist', 'suitability of side line and body curve', 'appropriateness of positional pressure of chest circumference', 'appropriateness of positional pressure of upper part line', 'appropriateness of positional pressure of bottom part line', and 'satisfaction of whole silhouette of side and back'. The research and commercial bras were evaluated 4.23 and 3.44 respectively by the testers, and 4.25 and 3.40 by the examiners. The former ones were scored higher by both parties. They were also appreciated higher in general silhouettes of fitting and appearance.

• Nuclear Engineering and Technology
• /
• v.38 no.4
• /
• pp.375-382
• /
• 2006

Characterization tests (load vs. displacement curve) are conducted for the springs of Zirconium alloy spacer grids for an advanced LWR fuel assembly. Twofold testing is employed: strap-based and assembly-based tests. The assembly-based test satisfies the in situ boundary conditions of the spring within the grid assembly. The aim of the characterization test via the aforementioned two methods is to establish an appropriate assembly-based test method that fulfills the actual boundary conditions. A characterization test under the spacer grid assembly boundary condition is also conducted to investigate the actual behavior of the spring in the core. The stiffness of the characteristic curve is smaller than that of the strap-wised boundary condition. This phenomenon may cause the strap slit condition. A spacer grid consists of horizontal and vertical straps. The strap slit positions are differentiated from each other. They affords examination of the variation of the external load distribution in the grid spring. Localized legions of high stress and their values are analyzed, as they may be affected by the spring shape. Through a comparison of the results of the test and FE analysis, it is concluded that the present assembly-based analysis model and procedure are reasonably well conducted and can be used for spring characterization in the core. Guidelines for improving the mechanical integrity of the spring are also discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.11
• /
• pp.1197-1207
• /
• 2012

This study provides information for the design of pediatric inpatient uniforms with functionality and aesthetic beauty through a questionnaire-survey of the conditions of providing, wearing, preferences and improvement requirements for pediatric inpatient uniforms. As a result of the survey, intravenous injections were mostly given on the back of the hand, and the method of changing uniforms after intravenous injections was (in most cases) to pass the injection bottle through a sleeve or pant leg while the needle is inserted. The respondents answered that the sleeve length and pant length did not match. As a result of the preference of the pediatric inpatient design survey, respondents indicated they preferred pajama type, yellow color and medium size animal patterns. A similar ratio of set-in and raglan with no collar but with 3/4 length sleeve of round neck, front end, sleeve top opening, button closing and two pockets were preferred for shirts; however, a 3/4 length with rubber string on the waist, no opening and inner opening were preferred at the same ratio for pants. As for the method to adjust the length to assign functionality to pediatric inpatient uniforms, the most preferred sleeve was a roll-up sleeve with a strap and the most preferred pants were length adjusted pants that used a strap for both shirts and pants with a both sides strap. In addition, the majority of the respondents answered that a hand wrapper that protects the injection location during intravenous injections needs be developed. As for the development type, a half glove type and glove type were preferred in sequential order.

• Journal of the Korea Concrete Institute
• /
• v.21 no.2
• /
• pp.159-168
• /
• 2009

In this study, strength, stiffness and confinement effect with stress-strain and stress-volumetric strain curves for improved uniaxial compressive behavior of RC circular columns laterally confined with prestressing aramid fiber strap were experimentally investigated. The test variables were the specimens with or without axial reinforcing bar and the number and spacing of strap, prestressing level, the types of reinforcing fiber (CFS, GFS). As a result, the failure type of the columns was very stable and strength increase rate was about 73% comparison with the general RC columns. Moreover, the strain increase rate is very small and the axial displacement confinement effect was very effective compared with existry methods (CFS, GFS), the initial and final lateral confinement effect was excellent.

• Journal of the Korea Convergence Society
• /
• v.11 no.3
• /
• pp.119-126
• /
• 2020

The purpose of this study is to identify trends in the type and method of Inertial Measurement Unit (IMU) by investigating studies on the type and method of convergence study of the IMU by systematic review. The study was conducted using PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. 23 studies that meet the selection criteria were selected from 630 studies identified by three databases. As a result of this study, showed that various research using IMU was being conducted around the world, and the type of IMU was strap, full body suit, belt, wrist watch, shoes and glove. Among them, the number of strap-type IMUs was the largest at 11. The IMU's strengths were simplicity, real-time data collection and ease of application, which were used as measurement methods such as task, walking, and range of joint. The result of this study is expected to be used as basic data for experts in the medical and rehabilitation fields that conduct IMU research.