• Korea-Australia Rheology Journal
• /
• v.14 no.1
• /
• pp.25-32
• /
• 2002

We report the first steps of a collaborative project between the University of Queensland, Polyflow, Michelin, SK Chemicals, and RMIT University, on simulation, validation and application of a recently introduced constitutive model designed to describe branched polymers. Whereas much progress has been made on predicting the complex flow behaviour of many - in particular linear - polymers, it sometimes appears difficult to predict simultaneously shear thinning and extensional strain hardening behaviour using traditional constitutive models. Recently a new viscoelastic model based on molecular topology, was proposed by McLeish and carson (1998). We explore the predictive power of a differential multi-mode version of the porn-pom model for the flow behaviour of two commercial polymer melts: a (long-chain branched) low-density polyethylene (LDPE) and a (linear) high-density polyethylene (HDPE). The model responses are compared to elongational recovery experiments published by Langouche and Debbaut (19c99), and start-up of simple shear flow, stress relaxation after simple and reverse step strain experiments carried out in our laboratory.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.387-392
• /
• 1999

The bond performance of prestressing strands is still not well understood and is still in controversy on the validity of the test results up to today, although it is a basic information to desing the prestressed pretensioned concrete beams. Different transfer length has been found for a product of the same company, but of the different production methods and factories in the United States. It is necessary to determine optimum transfer bond length of the domestic stands because the ultimate flexural and shear capacity in a section of prestressed concrete beams are evaluated under the assumption that the anchorage bond failure shall not happen. The transfer lenght of low-relaxation, Gr 270, and 1/2" seven-wire prestressing strands from four domestic companies will be evaluated by the concrete strain method. The recent concept of the 95% Maximum Average Strain Method suggested by Russel et al. will be considered to obtain the transfer length of domestic strands. It will be also evaluated if the domestic strands are conform to ACI 318-95.8-95.

• Journal of Mechanical Science and Technology
• /
• v.15 no.9
• /
• pp.1281-1291
• /
• 2001

The hereditary integral form of a quasi-linear viscoelastic law has been employed. Four new concepts have been employed: 1. a reduced relaxation function with a non-linear exponential function of time, 2. an inverse method to determine the scale factor of the elastic response, 3. an instant elastic recovery strain during unloading, and 4. the results of a constitutive model for cyclic tests may be a function of the Heavyside class. These concepts have been supported by agreement between measured and predicted responses of soft connective tissue to three types of multiple cyclic tests which include rest periods of no extension and alternations between different strain levels. Such agreement has not been attained in the previous studies. Chun and Hubbard (2001) is our companion experimental analysis paper.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.1953-1960
• /
• 2002

The viscoplasticity theory based on overstress, one of the unified state variable theories, is generalized to model zero (no influence of loading rate) and negative (flow stress decreases with loading rate) as well as positive (flow stress increases with loading rate) rate sensitivity in a consistent way. On the basis of the long-time asymptotic solution the different types of rate sensitivity are classified with respect to an augmentation function that is introduced in the evolution law fur a state variable equilibrium stress. The theory predicts normal relaxation and creep behaviors even if unusual rate sensitivity is modeled. The constitutive model fir the behavior of a modified 9Cr-1 Mo steel at various temperatures is then compared with experimental data found in the literature.

• Journal of Magnetics
• /
• v.12 no.1
• /
• pp.49-52
• /
• 2007

We investigated annealing effect of microforged powders on magnetic properties and electromagnetic absorption behaviors for ferromagnetic Fe-Cr metal alloy powder-polymer composites. The coercive properties greatly decreased with annealing temperature and the magnetic permeability had significantly increased after microforging and subsequent annealing treatment, due to a reduction in lattice strain of the microforged powders. The power loss in the far field regime also had greatly increased after microforging and subsequent annealing treatment in frequency range from 50 MHz to 6 GHz. As a result, the electromagnetic absorption of ferromagnetic Fe-Cr alloy metal powder-polymer composites was highly improved because of the relaxation of the internal strain during annealing process.

• Korean Journal of Metals and Materials
• /
• v.46 no.9
• /
• pp.572-576
• /
• 2008

Elastostatic compression tests were carried out on amorphous alloys to evaluate their energy absorption capability during homogeneous deformation at room temperature. Experiments demonstrated that a compressive stress below the global yield imposed on amorphous alloys for extended periods causes homogeneous plastic strain associated with the irreversible structural disordering. During the disordering process, free volume was created, dissipating the externally applied strain energy and the rate of creation was found to converge to a saturated value. We evaluated the capability of energy absorption of amorphous alloys during homogeneous deformation using recent theories on the evolution of the structural state.

• The Korean Journal of Physiology
• /
• v.28 no.2
• /
• pp.181-190
• /
• 1994

Endothelium-derived relaxing factor (EDRF) activates guanylate cyclase which mediates the formation of cGMP from GTP in vascular smooth muscle. It is well known that endothelium-dependent relaxation is impaired in spontaneously hypertensive rats (SHR). However, it is still unknown whether the impaired endothelium-dependent relaxation in SHR results from the reduced release of EDRF or from the decrease of vascular response to EDRF. We investigated the effects of cGMP on the contractility and Ca movement in the aorta of SHR and Wistar-Kyoto rats (WKY). The amplitude of the endothelium-dependent relaxation to actylcholine (ACh) was significantly less in SHR than in WKY. L-arginine $(10^{-3}M)$ did not increase endothelium-dependent relaxation in both strains. Sodium nitroprusside (SNP), an activator of guanylate cyclase, relaxed the 40 mM $K^+-induced$ contraction in a dose-dependent manner $(10^{-10}{\sim}10^{-6}\;M)$ in the endothelium-rubbed aortic strips of both strains. However, there was no significant difference in these relaxations between WKY and SHR. 8-bromo-cyclic guanosine monophosphate (8-Br-cGMP), a cell membrane-permeable derivative of cGMP relaxed the 40 mM $K^+-induced$ contraction in a dose-dependent manner $(10^{-6}{\sim}10^{-4}\;M)$ in the endothelium-rubbed aortic strips of both strains. Also norepinephrine $(10^{-6}\;M)-induced$ contractions in normal and Ca-free Tyrode's solution were suppressed by the pretreatment with 8-Br-cGMP $(10^{-4}\;M)$ in either strain. However, the amplitudes of suppression induced by 8-Br-cGMP were greater in SHR than that in WKY. Basal $^{45}Ca$ uptake and 40mM $K^+-stimulated\;^{45}Ca$ uptake were not suppressed by pretreatment with 8-Br-cGMP $(10^{-4}\;M)$ in single aortic smooth muscle cells of both SHR and WKY. From the above results, it is suggested that cGMP decreases Ca sensitivity in vascular smooth muscle cells and that the impaired endothelium-dependent relaxation in the aortic strips of SHR is not the result of a reduced vascular response to EDRF.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.2
• /
• pp.123-130
• /
• 2019

As a cold-weather-concrete construction technique for enhancing the sustainability and improving efficiency of cold-weather construction, the cracking timing, the starting point of deterioration for concrete, due to the shrinkage of the blast furnace slag cement concrete including accelerator was evaluated. As a result, by using blast furnace slag and accelerator, the cracking was developed faster with higher cracking potential under the restrained conditions at constant age and free-shrinkage strain. It can be considered that the results of decreased stress relaxation by creep or increased restraint with increased free-shrinkage strain causes the increased cracking development speed. Hence, it should be considered the necessary of cracking due to the shrinkage when blast furnace slag or accelerator was used for cold-weather construction.

• Korean Journal of Metals and Materials
• /
• v.47 no.11
• /
• pp.707-715
• /
• 2009

This paper deals with cyclic stress and strain responses during isothermal low cycle fatigue (LCF) and thermo-mechanical fatigue (TMF) loadings on Nb and Mo containing 15Cr stainless steel, which is used for exhaust manifolds in automobiles. The test temperatures ($T_{i}$) of the isothermal LCF were 600 and $800^{\circ}C$. The minimum temperature of the TMF test was $100^{\circ}C$ and the maximum temperaures ($T_{p}$) were varied between 500 and $800^{\circ}C$. In both loading conditions, weak cyclic softening is observed at $T_{i}=T_{p}=800^{\circ}C$, but the transition to strong cyclic hardening is completed with the temperature decrease below $T_i=600{\sim}700^{\circ}C$ for LCF and $T_{p}=500{\sim}600^{\circ}C$ for TMF. The stress-strain hysteresis loops in the TMF loading show a significant stress relaxation during compressive (heating) half cycle at $T_{p}>500^{\circ}C$, which develops tensile mean stress during cycling. Due to the stress relaxation, the TMF test sample reveals much lower dislocation density than the isothermally fatigued sample at the same temperature with $T_{p}$. A detailed correlation between fatigue microstructure and cycling deformation behavior is discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.11 s.254
• /
• pp.1494-1501
• /
• 2006

Mechanical and physical properties of a copper alloy for a liquid rocket engine(LRE) combustion chamber liner application were tested at various temperatures. All test specimens were heat treated with the condition they might experience during actual fabrication process of the LRE combustion chamber. Physical properties measured include thermal conductivity, specific heat and thermal expansion data. Uniaxial tension tests were preformed to get mechanical properties at several temperatures ranging from room temperature to 600$^{\circ}C$. The result demonstrated that yield stress and ultimate tensile stress of the copper alloy decreases considerably and strain hardening increases as the result of the heat treatment. Since the LRE combustion chamber operates at higher temperature over 400$^{\circ}C$, the copper alloy can exhibit time-dependent behavior. Strain rate, creep and stress relaxation tests were performed to check the time-dependent behavior of the copper alloy. Strain rate tests revealed that strain rate effect is negligible up to 400$^{\circ}C$ while stress-strain curve is changed at 500$^{\circ}C$ as the strain rate is changed. Creep tests were conducted at 250$^{\circ}C$ and 500$^{\circ}C$ and the secondary creep rate was found to be very small at both temperatures implying that creep effect is negligible for the combustion chamber liner because its operating time is quite short.