• Fisheries and Aquatic Sciences
• /
• v.27 no.6
• /
• pp.379-391
• /
• 2024

Tocopherol, carotenoids, and chlorophyll are the primary components of the antioxidative response in microalgae. Conditions of stress, such salt stress, can trigger the processes responsible for the accumulation of tocopherol and carotene. It has been found that the most difficult part of culturing microalgae is keeping it affordable. This study investigated the effects of different salt types and concentrations on the amount of α-tocopherol, carotenoid derivatives, and flocculation efficiency of Euglena sp. Cultures of Euglena sp. was developed under salt stress conditions of NaCl 200 mM and KCl 200 mM. UV-VIS spectrophotometry was used to confirm the presence of α-tocopherol and carotenoid derivatives under thirteen days of salt stress testing. Increasing salinity has a significant effect on Euglena sp., causing spherical cell morphologies with aspect ratio 1.385 ± 0.031 for NaCl 200 mM and 1.414 ± 0.040 for KCl 200 mM. Increasing salinity also slowing down development with specific growth rate value of 0.171 ± 0.006 per day and 0.122 ± 0.029 per day for NaCl and KCl 200 mM, respectively. Nevertheless, the amount of α-tocopherol in Euglena sp. increases with a high salt concentration; algal cells flocculated more successfully when increasing the salt concentrations (NaCl 200 mM and KCl 200 mM) was added. Due to the inhibition of photosynthetic activity in salt-stressed cells, the control group exhibited higher levels of carotenoid derivatives (ranging from 0.5-1 ㎍/mL) and pheophytin a and b (0.0062 ± 0.001 ㎍/mL and 0.0064 ± 0.001 ㎍/mL) than the group treated with salt stress. In conclusion, salt stress was an effective way to raises the concentration of α-tocopherol and significantly reduce the expense of harvesting Euglena sp.

• Steel and Composite Structures
• /
• v.52 no.4
• /
• pp.419-434
• /
• 2024

A flat slab is a structural system where columns directly support it without the presence of beam elements. However, despite its wide advantages, this structural system undergoes a major deficiency where stresses are concentrated around the column perimeter, resulting in the progressive collapse of the entire structure as a result of losing the shear transfer mechanisms at the cracked interface. Predicting the punching shear capacity of RC flat slabs is a challenging problem where the factors contributing to the overall slab strength vary broadly in their significance and effect extent. This study proposed a new expression for predicting the slab's capacity in punching shear using a nonuniform concrete tensile stress distribution assumption to capture, as well as possible, the induced strain effect within a thick RC flat slab. Therefore, the overall punching shear capacity is composed of three parts: concrete, aggregate interlock, and dowel action contributions. The factor of the shear span-to-depth ratio (a_v/d) was introduced in the concrete contribution in addition to the aggregate interlock part using the maximum aggregate size. Other significant factors were considered, including the concrete type, concrete grade, size factor, and the flexural reinforcement dowel action. The efficiency of the proposed model was examined using 86 points of published experimental data from 19 studies and compared with five code standards (ACI318, EC2, MC2010, CSA A23.3, and JSCE). The obtained results revealed the efficiency and accuracy of the model prediction, where a covariance value of 4.95% was found, compared to (13.67, 14.05, 15.83, 19.67, and 20.45) % for the (ACI318, CSA A23.3, MC2010, EC2, and JSCE), respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.747-754
• /
• 2012

The purpose of this study was to compare inter-regional accident modes using the National Hospital Discharge Patient Injury Survey. In order to determine economic status of each region, 234 cities and counties were categorized as 5 groups according to their financial self-reliance ratio. The main results are as follows. First, transport accidents had increased by the age group of 25 to 44 but decreased thereafter. Second, the frequency of car accidents was the highest among several types of transport accidents. Most common site of transport accidents was roads and highways. Third, there was significant difference in the modes of transport accident among regions. Fourth, emergency admission rate was quite different according to regional groups but it was no significant difference by economic status. Lastly, there was significant difference in injury patterns by region groups. In regions which were high economic status, there were relatively less serious injury patterns such as sprain, strain, dislocation while regions which were in low economic status had experienced serious injury including fracture, stab wound, and open fracture. We could find the difference in accident modes by regional economic status. Therefore, health authority should consider different accident prevention strategies by regional groups.

• ALGAE
• /
• v.22 no.4
• /
• pp.287-295
• /
• 2007

Infection of free-living dinoflagellates by endoparasitic dinoflagellates of the genus Amoebophrya are thought to have significant impacts on host population dynamics and have long been proposed to be a potential biological agent for controlling harmful algal bloom (HAB). To understand the impact of Amoebophrya on particular host species, however, it is necessary to quantify aspects the parasites life cycle. Here we used cultures of Amoebophryahost systems from Jinhae Bay, Korea to determine, parasite generation time, and dinospore survival and infectivity. The proportion of host cells infected by Amoebophrya sp. changed sharply from 5% to 87% with increasing dinospore:host inoculation ratios. In the absence of H. triquetra, most free-living dinospores died within 72 hours and their ability to infect host cells decreased remarkably in a day. The relatively short free-living phase of Amoebophrya suggests that the spread of infections is most likely to occur during seasons of high host abundance, as that is when dinospores have the greatest chance of encountering host cells. Infection of host cells inoculated with dinospores during the day was higher than when inoculated during the night, suggesting that infection rates might be related to environmental light conditions and/or diurnal biological rhythm of host species. Total generation times of parasite strains from a thecate dinoflagellate Heterocapsa triquetra were nearly the same regardless of dinospore:host inoculation ratios, representing 54 ± 0.5 h in a 1:1 ratio and 55 ± 1.2 h in a 20:1 ratio. Dinospore production of Amoebophrya sp. infecting Heterocapsa triquetra was estimated to be 125 dinospores per a strain of Amoebophrya sp. There is a growing need to maintain a variety of host-parasite systems in culture and to examine their autecology under various environmental conditions. Such studies would be very helpful in understanding ecological role of these parasites, their overlooked importance in the flow of material and energy in marine ecosystem, and their practical use as biological control agents applied directly to areas affected by HAB.

• Journal of Biosystems Engineering
• /
• v.36 no.2
• /
• pp.79-88
• /
• 2011

The purpose of this study was to analyze power requirement of an agricultural tractor by major field operations. First a survey was conducted to obtain annual usage ratio of agricultural tractor by field operation. Plowing, rotary tillage, and loader operations were selected as major field operations of agricultural tractor. Second, a power measurement system was constructed with strain-gauge sensors to measure torque of four driving axles and a PTO axle, speed sensors to measure rotational speed of the driving axles and an engine shaft, pressure sensors to measure pressure of hydraulic pumps, an I/O interface to acquire the sensor signals, and an embedded system to calculate power requirement. Third, the major field operations were experimented under fields with different soil conditions following planned operation paths. Power requirement was analyzed during the total operation period consisted of actual operation period (plowing, rotary tillage, and loader operations) and period before and after the actual operation (3-point hitch operating, forward and reverse driving, braking, and steering). Power requirement of tractor major components such as driving axle part, PTO part, main hydraulic part, and auxiliary hydraulic part were measured and calculated to determine usage ratio of agricultural tractor power. Results of averaged power requirement for actual field operation and total operation were 23.1 and 17.5 kW, 24.6 and 19.1 kW, and 14.9 and 8.9 kW, respectively, for plowing, rotary tillage, and loader operations. The results showed that rotary tillage required the greatest power among the operations. Averaged power requirement of driving axles, PTO axle, main hydraulic part, and auxiliary part during the actual field operation were 8.1, 7.8, 3.4, and 1.5 kW, respectively, and the total requirement power was about 70 % (20.8 kW) of the rated power. Averaged power requirement of driving axles, PTO axle, main hydraulic, and auxiliary hydraulic for the total operation period were 6.5, 6.0, 2.1, 0.9 kW, respectively, and total requirement power was about 52 % (15.5 kW) of the rated power. Driving axles required the greatest amount of power among the components.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.3
• /
• pp.223-228
• /
• 1985

This experiment was designed to investigate the effect of dietary fibers on serum and liver lipids of cholesterol-fed rats. Forty-two male rats of Sprague-Dawley strain weighed $145{\pm}10\;g$ were divided into 6 groups, each group receiving a different diet for 6 weeks, i.e., basal diet, basal diet plus 0.5% cholesterol without fiber, basal diet plus 0.5% cholesterol and 5% pectin, basal diet plus 0.5% cholesterol and 5% agar, basal diet plus 0.5% cholesterol and 5% pectin plus tannic acid mixture and basal diet plus 0.5% cholesterol and 5% tannic acid. The lowest net weight gain and digestibility were found in 5% tannic acid-containing group. The weight of kidney, heart and lung was significant by different, however, those of liver and spleen was not significantly different among the groups tested. GOT and GPT of serum were significantly higher in 0.5% cholesterol-containing group without fiber, whereas those of 5% pectin-containing group were significantly lower. Highest total serum protein content was found in 0.5% cholesterol-containing group without fiber. However, albumin and A/G ratio were not significant. The content of total lipid and cholesterol in serum were not significant by different among the groups studied, whereas crude lipid contents of liver in 5% tannic acid and pectin plus tannic acid-containing groups were significantly lower. Cholesterol content in the liver was significantly lower in 5% tannic acid-containing group. Crude lipid and sterol content of feces were significantly higher in 5% pectin-containing group.

• Korean Journal of Microbiology
• /
• v.39 no.1
• /
• pp.21-26
• /
• 2003

Ninety strains of photosynthetic bacteria were isolated from a local stream at Kyonggi-do, Korea and were further screened. Using these isolated strains, experiments were performed under various light and oxygen conditions in order to select strains with high nitrogen $(NH_3-N,\; NO_3^--N)$ removal efficiencies. Results showed that all the strains screened removed $NH_3-N$, the light had no effect on nitrogen removal, and the nitrogen removal rate was higher aerobically than anaerobically. The removal of $NO_3^--N$ was showed up to 35.3% in some specific strains. Results of batch experiments using Rhodocyclus gelatinosus, an isolated strain with a superior removal rate of $NH_3--N$ and $NH_3-N$, under the anaerobic condition, showed that the removal rate of organics and $NH_3-N$ was the highest (98.2 and 89.0%, respectively) at the CODcr (mg/L)/biomass (mg/L) ratio of 0.2, and the $NH_3-N$ concentration did not increase with the decreasing $NH_3-N$ concentration. Experimental results from various C/N ratios confirmed that the effective removal rate (75.8%) of $NH_3-N$ occurred even at the low (5:1) C/N ratio as well as high ratios, and the simulataneous removal of $NO_3^--N$ (96.0%).

• Geomechanics and Engineering
• /
• v.13 no.2
• /
• pp.333-352
• /
• 2017

A comparison study is made between the dynamic properties of an argillaceous siltstone and its grouting-reinforced body. The purpose is to investigate how grout injection can help repair broken soft rocks. A slightly weathered argillaceous siltstone is selected, and part of the siltstone is mechanically crushed and cemented with Portland cement to simulate the grouting-reinforced body. Core specimens with the size of $50mm{\times}38mm$ are prepared from the original rock and the grouting-reinforced body. Impact tests on these samples are then carried out using a Split Hopkinson Pressure Bar (SHPB) apparatus. Failure patterns are analyzed and geotechnical parameters of the specimens are estimated. Based on the experimental results, for the grouting-reinforced body, its shock resistance is poorer than that of the original rock, and most cracks happen in the cementation boundaries between the cement mortar and the original rock particles. It was observed that the grouting-reinforced body ends up with more fragmented residues, most of them have larger fractal dimensions, and its dynamic strength is generally lower. The mass ratio of broken rocks to cement has a significant effect on its dynamic properties and there is an optimal ratio that the maximum dynamic peak strength can be achieved. The dynamic strain-softening behavior of the grouting-reinforced body is more significant compared with that of the original rock. Both the time dependent damage model and the modified overstress damage model are equally applicable to the original rock, but the former performs much better compared with the latter for the grouting-reinforced body. In addition, it was also shown that water content and impact velocity both have significant effect on dynamic properties of the original rock and its grouting-reinforced body. Higher water content leads to more small broken rock pieces, larger fractal dimensions, lower dynamic peak strength and smaller elastic modulus. However, the water content plays a minor role in fractal dimensions when the impact velocity is beyond a certain value. Higher impact loading rate leads to higher degree of fragmentation and larger fractal dimensions both in argillaceous siltstone and its grouting-reinforced body. These results provide a sound basis for the quantitative evaluation on how cement grouting can contribute to the repair of broken soft rocks.

• Journal of Applied Biological Chemistry
• /
• v.54 no.1
• /
• pp.7-14
• /
• 2011

Bacillus subtilis JK-1 showed degradation activity against crude oil, gasoline, kerosene, and light oil, and this strain was used as a crude biosurfactant producing microorganism in this study. To optimize the culture medium for production of crude biosurfactant, the influences of various carbon, nitrogen and mineral sources were assessed. The highest biosurfactant production by B. subtilis JK-1 was observed after 96 h cultivation, containing 1.0% (w/v) soluble starch as a carbon source and 0.5% (w/v) skim milk as a nitrogen source, and carbon to nitrogen concentraion (C/N) ratio was 2.0. For the biosurfactant production 0.1% (w/v) of $KNO_3$ was the most effective mineral source. Comparison of biosurfactant production indicates that B. subtilis JK-1 produces more biosurfactant in the optimum medium established in this study than LB and TSB. Under the optimum medium, the surface tension of culture broth of B. subtilis JK-1 was decreased from 47.3 dyne/cm to 24.0 dyne/cm after cultivation of 48 h.

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.171-176
• /
• 2003

Productivity of biosurfactant (rhamnolipid) by Pseudomonas aeuginosa F722 was investigated in the several culture conditions and culture composition. Biosurfactant production by P. aeuginosa F722 was amounted to 0.78 g/l as the result of the nitrogen sources and carbon sources without investing of optimum conditions. As for that one was investigated, biosurfactant production by P. aeruginosa F722 was amounted to 1.66 g/l. Biosurfactant production increased twofold because the composition of a modified C-medium was investigated efficiently. $NE_4$Cl or $NaNO_2$ inorganic nitrogens and yeast extract or trypton organic nitrogens were effective, but others inorganic nitrogens and organic nitrogens tested were not efficient far biosurfactant production by P. aeruginosa F722. The optimum concentration of $NH_4$Cl; inorganic nitrogen and yeast extract; organic nitrogen were 0.05% and 0.1%, respectively. In various carbon sources, others with the exception of hydrophobic property substrate (n-alkane) and hydrophilic property substrate (glucose, glycol) were not found to be effective fur biosurfactant production, and 3.0% was better in yield than other concentration of glucose. This yielded C-to-N ratios between 17 and 20. In our experiment, the highest biosurfactant production by P. aeruginosa F722 were observed in 5 days cultivation, containing glucose 3.0%, $NH_4$Cl 0.05%, and yeast extract 0.1% and C-to-N ratio was 20. Optimal pH and temperature for biosurfactant production were 7.0 and $35^{\circ}C$, respectively. Under the optimal culture conditions with glucose, biosurfactant production was amounted to 1.66 g/l. Velocity of biosurfactant production and strain growth increased after nitrogen depletion. The average surface tension of 30 mN/m after the 3 days of incubation under optimal culture condition was measured by ring tensionmeter.