• 한국구조물진단유지관리공학회 논문집
• /
• 제4권4호
• /
• pp.109-119
• /
• 2000

PVDF film sensor was applied to measure the stress concentration for monitoring the structural integrity. The strain calibration of this film sensor was performed by the bending test of aluminum beam. The PVDF sensor and the electrical strain gage were bonded on the beam. When the beam was loaded, the output of electrical strain gage was compared with the output of the PVDF sensor. The waveform of PVDF sensor output was shown as the same form of the output of electrical strain gage. The gain was determined as 1.7 by comparing these two signals to determine the exact value of the strain. In order to experiment the stress concentration, the stress field was analyzed by finite element analysis. The tensile test of notched steel specimens was conducted to develop the measurement technique of stress concentration. The output voltage ratio between the PVDF sensor near the notch and the PVDF sensor far from the notch could give the information about the load bearing capacity of steel specimen.

• 기술사
• /
• 제19권4호
• /
• pp.5-10
• /
• 1986

On SWS 41 Plates jointed by the F11T M 20 high strength bolts the study on stress behavior and safety degree until rupture in static tensile tests were performed. By these results, in case of no clamping force stress concentration was extremed for strain of about 10% higher ratio. Elastic strain occurred to change of test specimens depth by the load and plastic strain occurred to local minute sleep after elastic strain. compared shear stress with tension stress from the fracture load it was showned lower values than the maximum shear stress theory and stress strain energy theory.

• 대한환경공학회지
• /
• 제36권10호
• /
• pp.672-678
• /
• 2014

본 연구는 음식물 쓰레기 내 질소농도에 따른 발효과정에서 수소생성 특성과 미생물의 군집변화를 살펴보았다. 음식물 쓰레기 내 질소의 함량이 200 mg/L일 때 가장 높은 수소생산 효율을 보여주었으며, 이 때 수소생산율은 83.43 mL/g dry wt biomass/hr이였다. 질소의 함량이 600 mg/L 이상이 되면 수소생산이 저해되는 것으로 나타났으며 수소생산량과 B/A ratio (Butric acid/Acetic acid)의 비례적 상관관계는 관찰되지 않았다. 16S rDNA의 PCR-DGGE결과 대부분 군집은 Clostridium sp. 미생물로 규명되었으며 수소생성에 기여도가 큰 미생물은 Enterococcus faecium partial, Klebsiella pneumoniae strain ND6, Enterobacter sp. NCCP-231, 그리고 Clostridium algidicarnis strain E107 등으로 판명되었다.

• 한국지반공학회논문집
• /
• 제23권4호
• /
• pp.169-183
• /
• 2007

쇄석다짐말뚝으로 보강된 연약지반 상 기초지반의 침하특성과 하중분담효과를 구명하기 위하여 말뚝과 지반의 경계면 조건, 치환율, 형상비 및 상재하중 등을 고려하여 말뚝의 입력물성치 산정을 위한 현장재하시험과 수치해석을 수행하였고 본 연구의 해석결과와 비교, 검증하기 위하여 현장원형(prototype)시험을 진행 중에 있다. 아울러 기존의 SCP에 대한 탄성 하중전이 이론을 보정하여 수정식을 제안하였다. 해석결과 연성기초에 설치된 쇄석다짐말뚝의 경우 강성기초와는 다르게 경계면 조건에 따라 크게 영향을 받으며 침하특성은 자유변형률(free strain)로 인하여 말뚝은 감소하고 주변지반은 증가하는 경향을 보였으며 응력집중비는 말뚝 하부로 내려감에 따라 증가하였다. 또한 치환율과 형상비 증가에 따라 최대 응력집중비가 증가하나 어느 한계 이상에서는 수렴되었고 고치환율과 긴 말뚝에서는 상재하중 증가에 따른 영향을 크게 받는 것으로 나타났다.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.808-813
• /
• 2004

The stress analysis on orthotropic composite cylindrical shells with one circular or one elliptical cutout subjected to an axial force is carried out by using an analytical and experimental method. The composite cylindrical shell governing equation of the Donnell's type is applied to this study and all results are presented by the stress concentration factor. The stress concentration factor is defined as the ratio of the stress on the region around a cutout to the nominal stress of the shell. The stress concentration factor is classified into the circumferential stress concentration factors and the radial stress concentration factors due to the cylindrical coordinate of which the origin is the center of a cutout. The considered loading condition is only axial tension loading condition. In this study, thus, the maximum stress is induced on perpendicular region against axial direction, on the coordinate. Various cutout sizes are expressed using the radius ratio, (equation omitted), which is the radius of a cutout over one of the cylindrical shell. Experimental results are obtained using strain gages, which are attached around a cutout of the cylindrical shell. As the result from this study, the stress concentration around a cutout can be predicted by using the analytical method for an orthotropic composite cylindrical shell having a circular or an elliptical cutout.

• 한국해양공학회지
• /
• 제4권1호
• /
• pp.110-119
• /
• 1990

This study is concerned about the stress concentration factor measurement by photoelastic method, for the case of two circular holes arrangement in 3mm semi-infinite plate under tensile load, the ratio of those two circular holes diameter, the ratio of distance apart from circular holes to breadth and the two holes arrangement angle with loading direction were varied. Besides, the measured stress concentration by photoelastic method around one circular hole was compared with that by strain-gage method.

• 한국염색가공학회지
• /
• 제22권1호
• /
• pp.51-60
• /
• 2010

This research works on the effects of drawing conditions on the physical properties of the drawn worsted yarns. The drawn worsted yarns were made by the yarn drawing system under various drawing conditions such as concentration of reducing agent, draw ratio, setting time of drawn yarn, and concentration of oxidizing agent. The drawn worsted yarns from 2/80Nm to 2/90Nm were obtained from 2/60Nm worsted yarns, the surface and cross-sectional shapes and tensile properties of these various specimens were measured and discussed with the various drawing conditions. The drawing of worsted yarn made constituent wool fiber scratched and made it changing to polygonal cross-sectional shape. The tenacity and modulus were increased with draw ratio and concentration of reducing agent. And tensile strain was increased with draw ratio, which decreased with concentration of reducing agent.

• 한국전산구조공학회논문집
• /
• 제30권4호
• /
• pp.275-282
• /
• 2017

본 논문에서는 변형에 의해 유발된 패턴변화(pattern transformation)에 기반하여 압축(compression)과 인장(tension) 하중 모두에서 음의 포아송 비(negative poisson's ratio)를 나타내는 다공성(porous) 구조를 제안한다. 기존에 개발된 원형 구멍을 이용한 구조는 연결선(ligament)의 회전 모멘트 부족으로 인해 인장 시 양의 포아송 비를 나타내는 한계점이 있었으며, 타원형 구멍을 이용한 구조는 응력집중 현상으로 인하여 내구성(durability)이 약한 문제점이 있었다. 이에 본 연구에서는 휘어진 연결선의 배열을 통하여 인장하중 하에서의 회전 모멘트를 증가시키는 동시에 응력집중 현상을 완화하고 변형에너지(strain energy)를 구조물 전반에서 고르게 흡수하도록 설계하였다. 이를 통해 10%의 공칭 변형률(nominal strain) 범위 내의 압축과 인장 모두에서 음의 포아송 비를 가지며, 기존 모델에 비하여 강성(stiffness)과 내구성이 개선된 구조를 개발하였다. 비선형 유한요소해석을 통하여 기존 타원형 구멍 모델과의 비교를 수행하였으며 제안된 모델이 구조의 강성과 내구성 측면에서 현저히 개선됨을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.554-559
• /
• 2007

The cylinder cover stud for assembling the combustion chamber components of low-speed marine diesel engine is one of the main structural components in engine. To understand the structural behavior of the stud is quite important for safe and economic design of it. In this paper, the structural behavior and design adequacy of the stud have been evaluated through strain measurement and structural analysis for the world's two largest engine types. Moreover, a feasibility study for design modification was carried out based on fatigue test and calculation. The results showed that 1) the stud experiences very high stress ratio under normal operating conditions, 2) the fatigue strength of the stud is sufficient, and 3) results from strain measurement and structural analysis were quite close each other.

• 한국미생물·생명공학회지
• /
• 제19권4호
• /
• pp.419-427
• /
• 1991

에탄올의 발효 생산성을 높이기 위해서는 발효조의 균체농도를 높여 고농도의 배양을 해야하며 또한 에탄올에 의한 저해 작용을 감소시켜 비생산성을 향상시키기 위해서는 발효액 중에 축적되는 에탄올을 배출 시킬 필요가 있다. 이와 같은 목적으로 본 연구에서는 고분자 hollow fiber membrane, ceramic filter를 이용하여 가장 중요한 조작 변수인 희석율과 bleed stream ratio가 에탄올 생산성에 미치는 영향 및 조작의 문제점과 장기 조업 가능성을 검토하였다.