• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.107-113
• /
• 1993

Small rectangular explosion chamber of its size 25cmX25cmX32cm with a circular bursting diaphram at the top was used to study the mechanism of gas explosion to fire transition phenomena, the process of ignition of solid combustibles during a gas explosion. To visulize the explosion to fire transition phenomena, transparent acryl window and high speed camera system were used. The test piece of solid combustible in this experiments was a 5cm$\times$5cm square sheet of newspaper which was placed in the explosion chamber filled with a LPG-air mixture. The mixture was ignited by an electric spark at the center of the chamber. Explosion to fire transition phenomena and the behavior of out flow and in flow of gas through the opening yielded by bursting the diaphram was visualized with shlieren system and without shlieren system. Diameter of a bursting dlaphram at the top of the explosion chamber was varied 5cm, 10cm, and 15cm, and the position of test piece were varied with 6 point. Explosion pressure was measured with strain type pressure transducer, and the weight difference of the test piece before and after each experimental run was measured. By comparing the weight difference of solid combustibles before and after the experiment and the behavior of out flow and inflow of gas after explosion, it was found that the possibility of ignition was depends on the LPG-air mixture concentration and the exposure period of test piece to the burnt gas. Test result of this experiments it was found that the main factor of this phenomena are that heat transfer to the test piece, and the pyrolysis reaction of test piece. Based on the results, the mechanism of the explosion to fire transition phenomena were inferred ; gas explosion- heat transfer to solid combustibiles ; pyrolysis reaction of solid combutibles : air inflow ; mixing of the pyroly gas with air ignition.

• Korean Journal of Veterinary Research
• /
• v.36 no.4
• /
• pp.997-1005
• /
• 1996

For understanding the role of infectious bursal disease virus(IBDV) to the pathogenesis of necrotic enteritis due to Clostridium perfringens(CP), all 15 day-old chickens used were divided as the following groups; A and E group with the feeding of feed contaminated with CP, B group with oral adminstration of IBDV($50{\mu}l/head$, $10^{3.4}EID_{50}$ of $P_4$ strain) and simultaneously feeding of feed contaminated with CP, C group treated with IBDV alone, F group with the feeding of feed contaminated with CP at 3 weeks after oral inoculation of IBDV, D and G group with the feeding of normal feed as controls. In mortality, B group(30%) was not a difference compared to A group(20%)(p>0.05), but in the pathological lesions the former was more severe degree than the latter. The mortality of F group(70%) was a significant difference to those of A, B or E group (20%)(p<0.01). Also, showed much F group more marked lesions than A, B or E group. In the chickens occurred the death during the study, mean concentration of CP was reached at $10^8{\sim}10^9CFU/g$ in the intestinal contents. B group showed higher mortality and more severe pathological changes than A and E group. Consequently, the results in the study were confirmed that the IBDV could be a role as a enhancing factor in pathogenesis of necrotic enteritis due to CP under the field condition.

• Membrane and Water Treatment
• /
• v.14 no.1
• /
• pp.35-45
• /
• 2023

Biofilms significantly affect the performance of wastewater treatment processes in which biodegradability of numerous microorganisms are actively involved, and various technologies have been applied to secure microbial biofilms. Understanding changes in biofilm characteristics by regulating expression of signaling molecules is important to control and regulate biofilms in membrane bioreactor, i.e., biofouling. This study investigated effects of addition of acyl-homoserine lactones (AHL) as a controllable factor for the microbial signaling system on biofilm formation of Pseudomonas aeruginosa PAO1 and multiple strains in membrane bioreactor. The addition of three AHL, i.e., C4-, C6-, and C8-HSL, at a concentration of 200 ㎍/L, enhanced the formation of the PAO1 biofilm and the degree of increases in the biofilm formation of PAO1 were 70.2%, 76.6%, and 72.9%, respectively. The improvement of biofilm formation of individual strains by C4-HSL was an average of 68%, and the microbial consortia increased by approximately 52.1% in the presence of 200 ㎍/L C4-HSL. CLSM images showed that more bacterial cells were present on the membrane surface after the AHL application. In the COMSTAT results, biomass and thickness were increased up to 2.2 times (PAO1) and 1.6 times (multi-strains) by C4-HSL. This study clearly showed that biofilm formation was increased by the application of AHL to individual strain groups, including PAO1 and microbial consortia, and significant increases were observed when 50 or 100 ㎍/L AHL was administered. This suggests that AHL application can improve the biofilm formation of microorganisms, which could yield an enhancement in efficiency of biofilm control, such as in various biofilm reactors including membrane bioreactor and bioflocculent systems in water/wastewater treatment processes.

• Elastomers and Composites
• /
• v.58 no.1
• /
• pp.32-43
• /
• 2023

The worldwide use of polyurethane foam products generates large amounts of waste, which in turn has detrimental effects on the surroundings. Hence, finding an economical and environmentally friendly way to dispose of or recycle foam waste is an utmost priority for researchers to overcome this problem. In that sense, the glycolysis of waste flexible polyurethane foam (WFPF) from automotive seat cushions using different industrial-grade glycols and potassium hydroxide as a catalyst to produce recovered polyol was investigated. The effect of different molecular weight polyols, catalyst concentration, and material ratio (PU foam: Glycols) on the reaction conversion and viscosity of the recovered polyols was determined. The obtained recovered polyols are obtained as single or split-phase reaction products. Besides, the foaming characteristics and physical properties such as cell morphology, thermal stability, and compressive stress-strain nature of the regenerated flexible foams based on the recovered polyols were discussed. It was observed that the regenerated flexible foams displayed good seating comfort properties as a function of hardness, sag factor, and hysteresis loss compared to the reference virgin foam. With the growing demand for a sustainable and circular economy, a global valorization of glycolysis products from polyurethane scraps can be realized by transforming them into profitable substances.

• Journal of Microbiology and Biotechnology
• /
• v.34 no.4
• /
• pp.871-879
• /
• 2024

Our group had isolated Bifidobacterium breve strain BS2-PB3 from human breast milk. In this study, we sequenced the whole genome of B. breve BS2-PB3, and with a focus on its safety profile, various probiotic characteristics (presence of antibiotic resistance genes, virulence factors, and mobile elements) were then determined through bioinformatic analyses. The antibiotic resistance profile of B. breve BS2-PB3 was also evaluated. The whole genome of B. breve BS2-PB3 consisted of 2,268,931 base pairs with a G-C content of 58.89% and 2,108 coding regions. The average nucleotide identity and whole-genome phylogenetic analyses supported the classification of B. breve BS2-PB3. According to our in silico assessment, B. breve BS2-PB3 possesses antioxidant and immunomodulation properties in addition to various genes related to the probiotic properties of heat, cold, and acid stress, bile tolerance, and adhesion. Antibiotic susceptibility was evaluated using the Kirby-Bauer disk-diffusion test, in which the minimum inhibitory concentrations for selected antibiotics were subsequently tested using the Epsilometer test. B. breve BS2-PB3 only exhibited selected resistance phenotypes, i.e., to mupirocin (minimum inhibitory concentration/MIC >1,024 ㎍/ml), sulfamethoxazole (MIC>1,024 ㎍/ml), and oxacillin (MIC >3 ㎍/ml). The resistance genes against those antibiotics, i.e., ileS, mupB, sul4, mecC and ramA, were detected within its genome as well. While no virulence factor was detected, four insertion sequences were identified within the genome but were located away from the identified antibiotic resistance genes. In conclusion, B. breve BS2-PB3 demonstrated a sufficient safety profile, making it a promising candidate for further development as a potential functional food.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.947-954
• /
• 2005

This study was conducted to investigate the effects of hydrolyzed Lactobacillus supplementation with digestive enzymes treatment on the macrophage activation, the induction of nitric oxide(NO), interleukin (IL)-6 and tumor necrosis factor(TNF)-$\alpha$. The RAW 264.7 murine macrophage was exposed to porcine Lactobacillus strains which were digested with both pepsin and pancreatin. The production of NO, TNF-$\alpha$ and IL-6 in the macrophage were strain and dose-dependent, respectively. The induction of NO and cytokines were higher in both 3149 and 3146 strains compared with other Lactobacillus strains. Overall, the level of NO was observed at the lower range between 10 and 150 μg hydrolysates per ml, whereas IL-6 and TNF-$\alpha$ were observed at relatively higher concentration between 50 and 300 μg hydrolysates per ml. Lactobacillus strains which produced a high level of NO also showed a high induction of TNF-$\alpha$ and IL-6. Therefore, the present results suggest that hydrolysates of Lactobacillus strains are related to induction of several macrophage mediators, and then it could be beneficially used to modulate gastrointestinal immune function of the host. Also, the methodogly employed in this study might be useful to investigate the effects of lactic acid bacteria on gastrointestinal immunity.

• Journal of Applied Biological Chemistry
• /
• v.52 no.1
• /
• pp.33-37
• /
• 2009

A saccharified-rice was fermented using Leuconostoc(Ln.) mesenteroides KC51 strain in various dry matter (DM) contents (4%, 8%, and 12%) at $30^{\circ}C$ for 18 h. The changes of viable cell number, acid production and phytate degradation in saccharified-rice during fermentation were investigated. The viable cell population of Ln. mesenteroides KC51 was increased rapidly in proportion to DM contents during the 9 h of cultivation. The changes of pH and titratable acidity in saccharified-rice were dependent on DM contents. At high DM content (12%), the viable cell number of Ln. mesenteroides KC51 increased to 9.56 log CFU/g after 6 h of fermentation. The pH and titratable acidity reached to pH 3.38 and 0.93% after 18 h of fermentation, respectively. The phytate, known as an antinutrient factor, in saccharified-rice was degraded by Ln. mesenteroides KC51 cultivation. The decrease of phytate during fermentation approximately coincided with the increase of Ln. mesenteroides KC51 population observed in fermented saccharified-rice. Regardless of DM contents, the levels of phytate were reduced to around 50% of initial concentration.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.1
• /
• pp.114-120
• /
• 2002

A 1,989-bp genomic region encoding nickel resistance genes was isolated from Legionella pneumophila, a pathogen for legionellosis. From a sequencing and computer analysis, the region was found to harbor two structural genes, a nreB-like protein gene (1,149 bp) and a nreA-like protein gene (270 bp), in a row. Both genes exhibited a significant degree of similarity to the corresponding genes from Synechocystis sp. PCC6803 ($54\%$ amino acid sequence identity) and Achromobacter xylosoxidans 31A ($76\%$). The gene was successfully expressed in E. coli MG1655 and conferred a nickel resistance of up to 5 mM in an LB medium and 3 mM in a TMS medium including gluconate as the sole carbon source. E. coli harboring the nickel resistance gene also exhibited a substantial resistance to cobalt, yet no resistance to cadmium or zinc. Since the extracellular concentration of nickel remained constant during the whole period of cultivation, it was confirmed that the nickel resistance was provided by an efflux system like the $Ni^2＋$permease (nrsD) of Synechocystis sp. strain PCC6803. Since polyphosphate (poly-P) is known as a global regulator for gene expression as well as a potential virulence factor in E. coli, the nickel resistance of a ppk mutant of E. coli MG 1655 harboring the nickel resistance gene from L. pneumophila was compared with that of its parental strain. The nickel resistance was significantly attenuated by ppk inactivation, which was more pronounced in an LB medium than in a TMS medium.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.1-5
• /
• 2019

In this paper, the experimental study and finite elements analysis were conducted on homogeneous and dissimilar metals single lap-shear bonded joints to investigate the factor that affect the joint failure load. It was found that factors which have the significant effects on the failure load of the joint was stiffness of the adherends. And from experimental results, it can be confirmed that the failure load increases linearly with overlap length increases. And the failure load of dissimilar metal joints is approximately 1KN(10~17%) larger than homogeneous metal joints. In order to confirm this phenomenon, the stress distribution and strain distribution of the specimens were analyzed through the finite element analysis. The difference between homogeneous metals joints and dissimilar metals joints is that stress and strain in adhesive are concentrated at the end of the overlap zone close to aluminium which has lower rigidity than aluminium in case of dissimilar metals joints. From high rigidity of steel, the stress concentration in bonds are decreased and it cause increase of the failure strength at dissimilar metal joints.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.758-767
• /
• 2014

In this study, we selected an Escherichia coli strain (E. coli MG 1655) metabolizing arabinose derived from acid hydrolyzed black liquor as a carbon source and investigated effect of organic acids (acetic acid, formic acid, and lactic acid) presented in black liquor on growth of the E. coli MG 1655. We measured growth of E. coli MG 1655 under various concentration of each and combined three kinds of organic acids. The E. coli MG 1655 shows tolerance to acetic acid, lactic acid and formic acid at these concentrations ($1.0g/{\ell}$ acetic acid, $1.2g/{\ell}$ lactic acid and $0.8g/{\ell}$ formic acid, respectively), but displays some growth retardation over $1.5g/{\ell}$ acetic acid, lactic acid $2.0g/{\ell}$, and formic acid $1.2g/{\ell}$, respectively. In addition, formic acid was shown to be a critical factor affecting growth of the E. coli MG 1655 in the presence of three kinds of organic acids. These results indicate that the inhibitors should be removed at least $1.0g/{\ell}$ of acetic acid, $1.2g/{\ell}$ of lactic acid, $0.8g/{\ell}$ of formic acid for normal cell growth required for high yield fermentation. In addition, there is a need to construct recombinant strains that may be resistant to the same or higher organic acids concentration (> $1.2g/{\ell}$) in the growth.