• 제목/요약/키워드: Straight installation

검색결과 53건 처리시간 0.023초

실시간 플라즈마공정 모니터링을 위한 Self Plasma-Optical Emission Spectroscopy 성능 향상 (Improved Self Plasma-Optical Emission Spectroscopy for In-situ Plasma Process Monitoring)

  • 조경재;홍상진
    • 반도체디스플레이기술학회지
    • /
    • 제16권2호
    • /
    • pp.75-78
    • /
    • 2017
  • We reports improved monitoring performance of Self plasma-optical emission spectroscopy (SP-OES) by augmenting a by-pass tube to a conventional straight (or single) tube type self plasma reactor. SP-OES has been used as a tool for the monitoring of plasma chemistry indirectly in plasma process system. The benefits of SP-OES are low cost and easy installation, but some semiconductor industries who adopted commercialized SP-OES product experiencing less sensitivity and slow sensor response. OH out-gas chemistry monitoring was performed to have a direct comparison of a conventional single type tube and a by-pass type tube, and fluid dynamic simulation on the improved hardware design was also followed. It is observed faster pumping out of OH from the chamber in the by-pass type SP-OES.

  • PDF

Stocker 시스템에 적용한 고효율 비접촉 전원시스템 개발 (Development of High Efficiency Contactless Power Supply System for Stocker System)

  • 황계호;김원곤;윤종보;문인호;이봉섭;민병재;김동희
    • 조명전기설비학회논문지
    • /
    • 제24권2호
    • /
    • pp.77-85
    • /
    • 2010
  • 최근, LCD(Liquid Crystal Display) 산업에서 클린룸의 규모가 커짐에 따라 Stocker 시스템의 사이즈가 커지고 길이가 장거리화 되고 있다. 이에 제조업체는 생산수율을 높이기 위해 Stocker 시스템의 전체 택타임을 줄이기 위한 방안으로 Stocker 시스템의 속도 증가와 고유가 시대에 여러 장비들에 대한 에너지 절약을 통한 공장 운영비용이 최소화되도록 요구하고 있다. 따라서 본 논문은 차세대 Stocker 시스템의 에너지 절감과 이송 속도증가에 따른 고효율 비접촉 전원시스템(CPS, Contactless Power Supply)의 최적설계를 제안하고, 에너지 절감을 위한 비접촉 전원시스템의 시제품을 제작하여 부하인 크레인의 여러 운전 패턴에 따른 비접촉 전원시스템의 실증시험과 입/출력 특성, 효율 개선에 따른 최적화로 개발된 비접촉 전원 시스템의 에너지 절감 효과에 대하여 서술하였다.

고속도로 터널 내 LED Digital 경관조명 디자인의 유형별 특징 비교 연구 (A Study on the Characteristics of Each Type of LED Digital Landscape Lighting in Expressway Tunnel)

  • 황예진
    • 디지털융복합연구
    • /
    • 제19권12호
    • /
    • pp.457-462
    • /
    • 2021
  • 우리나라 지형의 특성상 산지가 많아 고속도로 직선화 건설 시에는 터널 설치가 필수적인 요소이다. "2019년도 도로 교량 및 터널 현황조서" 통계에 따르면 터널은 2,682개소이고 2,077km로 전체 도로연장의 1.9%를 차지하고 있으며 10년 전에 비해 1,300개소로 94% 증가하고 있다. 국내외 연구에 따르면 고속도로 설치된 1Km이상 되는 장대터널들은 좁고 어두운 조명과 단조로운 벽면 디자인으로 인해 운전자로 하여금 집중력 저하 및 지루함을 느끼게 하여 피로와 졸음이 쉽게 발생한다. 이에 한국도로공사에서는 2020년까지 3Km 이상 터널 10곳을 대상으로 주의력 높이는 디자인 조명을 설치하였다. 본 연구는 터널 내부에서 발생할 수 있는 사고의 위험성을 개선하고자 한국고속도로에서 설치된 터널 내 LED 경관 조명 디자인을 유형별로 특징을 비교 분석하였다. 연구 결과를 바탕으로 향후 터널 내 LED 경관 조명 설치 시 운전자로 하여금 주행 안정성 확보와 피로와 졸음사고를 낮출 수 있는 효과적인 설치를 위한 기초자료 제공의 목적으로 한다.

터널 환경측정 시스템 개발 및 측정 I -개발 시스템 및 지하철터널 측정- (Development of Tunnel-Environment Monitoring System and Its Installation I -Monitoring System and Measurement in Subway Tunnel-)

  • 박원희
    • 한국산학기술학회논문지
    • /
    • 제16권12호
    • /
    • pp.8608-8615
    • /
    • 2015
  • 터널에 온도, 습도, 풍향, 풍속 등의 환경 데이터를 실시간으로 측정하여 전송 및 화재감지기의 경년시험 등을 수행할 수 있는 시스템을 개발하였다. 개발된 터널 환경측정 시스템은 철도터널 중 금정터널, 솔안터널 및 서울지하철 4호선 터널 등 국내 3개의 대표 터널 현장에 설치가 되어 약 1년 이상 터널환경이 측정되었으며 안정적으로 운용되었다. 또한 서울지하철 4호선 과천선 본선터널에 설치된 2기의 개발된 터널 환경 측정시스템으로부터 측정된 결과를 분석하였다. 개발된 터널 환경측정 시스템은 무선 통신망을 이용하여 터널 환경을 24시간 연속으로 안전적으로 분석가능하며 터널뿐만 아니라 여러 분야에 활용이 가능할 것이다.

수평형 지중열교환기의 열전달 성능에 관한 연구 (A Study on Heat Transfer Performance of Horizontal Ground Heat Exchanger)

  • 정민호;박성룡;나호상;백영진;윤형기;장기창
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.684-687
    • /
    • 2005
  • Ground source heat pump systems are used for heating, ventilating and air-conditioning systems in commercial buildings, schools, and factories because of low operating and maintenance costs. These systems use the earth as a heat source in heating mode and a heat sink in cooling mode. Ground heat exchangers are classified by a horizontal type and vertical type according to the installation method. A horizontal type means that a heat exchanger is laid in the trench bored in 1.2 to 1.8 m depth. The solar heat and the rainwater are affected by the performance of heat exchanger and causes mutual influence among heat exchangers. In this study, to evaluate the performance of straight type, slinky type, and spiral type of horizontal ground heat exchangers designed on 1 RT scale, test sections are buried on the earth and experimental apparatus is installed. Therefore the performance of these is estimated.

  • PDF

Cycloid 치형을 적용한 Pin-Pinion 치형에 대한 연구 (A Study of Pin-Pinion Tooth Profile Applied with Cycloid Tooth Profile)

  • 함성훈;염광욱
    • 한국가스학회지
    • /
    • 제18권6호
    • /
    • pp.45-50
    • /
    • 2014
  • 본 논문에서는 산업기계 및 로봇산업에 적용할 수 있는 직선 정밀 이송 장치의 구동부를 설계하였다. 동력의 전달방향 및 출력특성은 기존의 Rack-Pinion 타입과 유사하나 구동부에 대하여 새로운 Pin-Pinion Gear 타입을 적용시켜 랙 모듈화를 통한 무한 길이 확장성을 구현하고 고속이송 및 설치의 편의성을 확보할 수 있으며 이러한 Pin-Pinion Gear의 최적물림을 위한 Cycloid 치형 해석을 하였다. 그 결과 Cycloid 치형으로 설계시 핀과 피니언 기어의 백래쉬 및 물림 특성이 적합하여 정밀제어가 가능한 치형으로 분석되었다.

쓰레기 매립층에서 그라운드 앵커의 극한하중 및 하중분포 (Ultimate Load and Load Distribution of Ground Anchor in Waste Landfill)

  • 김성규;조규완;김웅규
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.1434-1441
    • /
    • 2005
  • For anchored system applications, each ground anchor is tested after installation and prior to being put into service to loads that exceed the design. This load testing methodology, combined with specific acceptance criteria, is used to verify that the ground anchor can carry the design load without excessive deformations and that the assumed load transfer mechanisms have been properly developed behind the assumed critical failure surface. After acceptance, the ground anchor is stressed to a specified load and the load is locked-off. The two types of load tests conducted during the research program included performance test and creep test which were carried out in accordance with testing procedures by AASHTO(AASHTO 1990) and FHWA(Weatherby 1998) at Samsung-Dong 00 Site. Form the measurements, ultimate load and creep rate of anchors are proposed for straight shaft pressured grouted anchors in waste landfill. The load distribution on the grout was obtained from the measured strain data at each fraction of the ultimate load during the load tests.

  • PDF

초고압 XLPE 전력케이블용 Prefabricated Joint 및 접속기술 동향 (Trends of Prefabricated Joints and their Jointing Techniques for EHV XLPE-insulated Power Cables)

  • 김영;성정규;한창석
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 E
    • /
    • pp.1608-1610
    • /
    • 1998
  • An oil-filled paper-insulated power cable and a XLPE-insulated power cable have been mainly applied as an extra-high-voltage underground power cable. But in recent the XLPE cable has been applied more widely than the OF cable, because of its advantages, such as the low-cost and simple installation. In general two types, molded and prefabricated, of straight joints are applied for the XLPE cables. For a tape-molded joint, one of molded joints, its electrical properties are excellent, but it has some disadvantages, such as a long working time. high skill of workers and the high cost of jointing equipments. For a prefabricated joint, developed and applied in Europe and Japan, its working time is short, its jointing procedures are simple, and its quality control is easy, but its prices are very high. In Korea the development of a compression-type PJ will be finished in the near future, and studies of its jointing techniques and equipments is actively going on. This paper describes the design and construction of the PJ, the jointing procedures and techniques for the PJ, and its future trends.

  • PDF

Asymmetric Capacitive Sensor for On-line and Real-time Partial Discharge Detection in Power Cables

  • Changhee Son;Hyewon Cheon;Hakson Lee;Daekyung Kang;Jonghoo Park
    • 센서학회지
    • /
    • 제32권4호
    • /
    • pp.219-222
    • /
    • 2023
  • Partial discharges (PD) have long been recognized as a major contributing factor to catastrophic failures in high-power equipment. As the demand for high voltage direct current (HVDC) facilities continues to rise, the significance of on-line and real-time monitoring of PD becomes increasingly prominent. In this study, we have designed, fabricated, and characterized a highly sensitive and cost-effective PD sensor comprising a pair of copper electrodes with different arc lengths. The key advantage of our sensor is its non-invasive nature, as it can be installed at any location along the entire power cable without requiring structural modifications. In contrast, conventional PD sensors are typically limited to installation at cable terminals or insulation joint boxes, often necessitating invasive alterations. Our PD sensor demonstrates exceptional accuracy in estimating PD location, with a success rate exceeding 95% in the straight sections of the power cable and surpassing 89% in curved sections. These remarkable characteristics indicate its high potential for realtime and on-line detection of PD.

A New Cowpea Cultivar 'Okhyun' with Green Cotyledons and a Black Seed Coat

  • JinSil Choi;Dong-Kwan Kim;Seokbo Song;Namgeol Kim
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2023년도 춘계학술대회
    • /
    • pp.142-142
    • /
    • 2023
  • Cowpea(Vigna unguiculata L. Walp) has excellent physical properties and texture of starch, so it is mainly used in various ways for songpyeon sediment, rice-cake paste, and porridge. To utilize it as various processed products such as songpyeon sediment and cowpea milk, 'Okhyun', which has green cotyledons and black seed coats and can be harvested by combine was developed. A cowpea variety 'Okhyun' was improved from the cross between IT145379 and IT208081 at the JARES in 2022. 'Okhyun' has an erect plant with an intermediate plant habit, a light purple-colored corolla, and heart-shaped leaflets. 'Okhyun' has green cotyledons and black seed coats, and has straight black brown pods when mature. The stem length of 'Okhyun' is 47cm, and the weight of 100-seed weight was 12.9g, which was lower than the control variety 'Okdang'(16.6g). 'Okhyun' contains 25.8mg/100g of anthocyanin, 279mg/100g of total polyphenols, and 335mg/100g of total flavonoids, respectively. The average yield of 'Okhyun' was 1.97ton per hectare, 11% higher than that of the control cultivar 'Okdang'. 'Okhyun'' does not require the installation of an espalier-net net, so it is possible to harvest with a combine. In addition, 'Okhyun' variety with green cotyledons and a black seed coat is expected to contribute to developing regional specialties and various processed products.

  • PDF