• 한국작물학회지
• /
• 제59권2호
• /
• pp.134-138
• /
• 2014

도라지를 수확 후 진공포장, 밀폐포장, 질소가스포장 후 저온과 상온에 100일 동안 저장하면서 저장 50일과 100일에 도라지 경도와 사포닌 함량을 조사한 결과를 요약하면 아래와 같다. 1. 저장온도에 따른 도라지의 경도는 저온저장이 상온저장보다 높게 나타났으며, 저장기간이 길어질수록 도라지의 경도는 낮아졌다. 2. 저장방법에 따른 도라지의 경도는 저장 50일차 지퍼팩을 이용한 밀봉에서 1,765 g으로 가장 높게 나타났으며, 저장온도와 저장방법과의 상호작용에서는 고도의 유의성($P{\leq}0.01$)이 인정되었다. 3. 저장온도에 따른 platycodin D3, polygalacin D, 그리고 deapioplatycodin D의 함량조성이 다르게 나타났다. 4. 저장기간에 따른 platycodin D3와 polygalacin D의 함량은 저장 50일 이후 감소하는 경향을 보였지만, deapioplatycodin D는 저장기간이 길어질수록 증가하는 경향을 보였다.

• 대한임베디드공학회논문지
• /
• 제6권4호
• /
• pp.255-261
• /
• 2011

In this paper, we propose a security-enhanced storing method for the voice data obtained during the flight. When an emergency occurs during flight, the flight data in the storage device such as DTS or Blackbox can be exposed to antagonist or enemy. Currently, zeroize function is embedded in these devices in order to prevent this situation. However, this could not be operated if the system is malfunctioned or the pilot is wounded in the emergency. In order to solve this problem, the voice data compressed by the ADPCM is encrypted in the proposed method composed of the AES algorithm and a reordering method. The simulation results show that the security for the voice date is further enhanced due to the proposed method.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.436-439
• /
• 2011

휴대용 디지털 기기 보급의 확산되면서 휴대용 저장장치 수요가 급증하고 있으며, 디지털 카메라 및 캠코더에서는 대부분 SD 메모리 카드를 이용하고 있다. SD 메모리 카드는 일반적으로 플래시 메모리를 기반으로 사용자 데이터를 저장한 후 PC에 데이터를 복사하는 형태로 사용되고 있다. 본 논문에서는 플래시 메모리에 데이터를 저장하는 방식이 아닌, 네트워크를 통하여 사진 및 영상 데이터 저장을 할 수 있는 SD 메모리 카드를 제안한다. SD Slave IP를 통해서 들어오는 데이터 및 메모리 주소 값들을 플래시 메모리로 보내지 않고 네트워크 서버에 전달하여, 실시간으로 SD 메모리에 저장할 데이터를 안전하고 편리하게 저장할 수 있다.

• 한국군사과학기술학회지
• /
• 제8권1호
• /
• pp.14-24
• /
• 2005

A propellant mainly consisting of nitric ester including nitrocellulose, nitroglycerine and nitroguanidine is characteristic of being decomposed naturally. And this phenomenon is known as being affected mostly by its storing temperature. In this research, the effect of storing temperature on self life has been studied by measuring the contained quantity of residual stabilizer of propellant KM30A1, ignition powder and combustible cartridge case, which are parts of 155MM propelling charge K676 and K677; the method for the measurement is acceleration aging test, and decomposition reaction equation and Berthlot Equation were used for the calculation. The result of this research shows that propellant KM30A1, ignition powder, combustible cartridge case in order of decreasing self life, and the self life decreases to 1/3 as the temperature increases by $10^{\circ}C$.

• 동아시아식생활학회지
• /
• 제11권3호
• /
• pp.190-195
• /
• 2001

The objective of this study consists in finding the ways to make soybean cake (which is made of soaked soybean flour containing protein and lipid) a scientific and practical food even more easily. This study took a measurement of the change of pH, organic acid, microorganism, retrogradation and so soon. observing soybean cake prepared with soybean flour containing 6% of soybean oil at room temperature(19$^{\circ}C$) in two types of packaging, that is to say, $CO_2$ modified packing(CMP) and liner low density poly ethylene(LLDPE) packaging. As storing time went by, packed soybean cake didn't appeared in 12 days, either. Using modified atmosphere packaging soybean cake showed higer pH as well as less organic acid than unpacked. In addition, mould method makes water - activity lower, and it Puts a curb on the development of aerobic perishable microorganism and the retrogradation of rice cake. Unpacked soybean cake showed higher values than CMP Soybean Cake with enthalpy of retrogradation and the longer storing period the greater retrogradation process. Thus, storing or circulation period can be increased effectively without chemical or physical treatment.

• KIEAE Journal
• /
• 제16권6호
• /
• pp.77-82
• /
• 2016

Purpose: Almost every research carried out in our country against the natural disaster is focused on the temporary facilities such as temporary housing, emergency shelter and as a result, it is very hard to find out researches on the ordinary houses which installed integrated systems of hazard-resistant against the natural disaster. Method: To conduct this research, categorizing process for design, structural, environmental and installation elements found in the Hazard-Resistant and Reduction House built for sale in Japan was performed. Result: In this study, several design concepts and subordinate items are recommended for hazard-resistant housing. First, design concept of 'Preparedness' which means security and access to the storage storing goods especially food & beverage for the emergencies is needed. The subordinate items consist of security of stocking space, diversified and circular storage system, and safety storage system. Second, design concept of 'Security' which means security of physical safety space and rapid recovery to returning to daily life against natural disaster is needed. The subordinate items consist of many items including not only structure and facilities but also architectural design method. And finally, design concept of 'Maintenance, Support and Return' which means minimizing the physical and psychological damages and support safety and physical conditions of the victims from the impact of the disaster to returning to daily life is needed. The subordinate items consist of high efficiency insulation/airtightness design, microclimate design, combination of photovoltaic system and storage battery, non-power appliance system against the power failure, storing system for drinking water, rainwater storing and utilization system.

• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.44-51
• /
• 2009

A bonded warehouse is the warehouse located in bonded area. It functions not only as a general warehouse but also as a place for managing the work related to import and export bonded goods. As a general warehouse, it uses the rack system to store the goods and the folk lift truck to move the unitized goods. The operation of the storing system closely related to the efficiency of space uses in a warehouse and vehicle working. Thus, vehicle performance measured in distance units in the ware-house could be used as one of the key performance measure in warehouse system. This paper focuses on the operation efficiency of the bonded warehouse which uses rack system for the storing and the folk lift truck for moving goods. The method of load allocation for balancing the rack uses and vehicle operation for maximizing efficiency are the specific concerns in this paper. The simulation study is conducted to find a policy for efficient vehicle operation based on balanced rack utilization, and the favorable result for the system operation would lead the usable proposal in vehicle operation.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.590-598
• /
• 2018

최근 사물들에 인터넷 서비스를 제공하는 IoT(Internet of Things) 기술에 관한 관심이 높아지고 있다. IoT는 홈 네트워크, 헬스 케어, 재난 알림 등에서 다양한 서비스를 제공하고 있다. LLN(Low Power & Lossy Networks) 특징을 갖는 IoT는 빈번한 센서 노드의 손실이 발생한다. IoT의 표준 라우팅 프로토콜인 RPL은 센서 노드의 손실이 발생하면 전체 경로 재설정(Global repair)을 수행하여 데이터를 전송한다. 하지만 낮은 사양의 센서 노드로 인한 빈번한 센서 노드 손실은 잦은 전체 경로 재설정으로 인해 네트워크 성능 저하를 일으킨다. 본 논문에선 Storing mode 센서 노드 선정 이후에도 잦은 경로 재설정 문제로 인한 네트워크 성능 저하 문제를 해결하기 위한 Storing mode 센서 노드의 추가 선정 방법을 제안하고 각 Instance의 전체 경로 재설정 횟수의 평준화 방법을 제안하고자 한다.

• 한국컴퓨터산업학회논문지
• /
• 제2권6호
• /
• pp.827-836
• /
• 2001

데이터는 컴퓨터 시스템에서 파일구조로 나타난다. 그러나 파일의 크기는 매우 커지고, 그것을 제어하고 전송하기에 어려운 점이 있다. 그래서 최근에 데이터 압축에 대한 새로운 알고리즘이 개발되고 있다. 그래서 본 논문에서는 허프만 압축기법의 단점을 보완하여 새로운 동적 압축 기법을 제안하고자 한다. 허프만 압축 기법에는 두 가지 단점이 있다. 첫 번째로 처음 파일내의 문자의 빈도수를 구할 때와 실제로 압축하기 위해서 동작할 때, 파일을 두 번 읽어들인다는 것과, 두 번째로, 트리에 대한 정보를 같이 저장해야되기 때문에, 그 만큼 압축 효율이 떨어진다는 것이다. 이러한 단점은 본 논문에서 제시한 방법은, 동적인 형태로 재배치된 데이터를 한번에 읽어들일 수 있고, 파이프라인 구조로 트리의 정보를 저장할 수 있기 때문에, 새로운 동적 재배치 방법으로 해결할 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1182-1188
• /
• 2011

By storing various train information in running high speed train, we can analyze the cause of train accident efficiently. we have developed the smart and high available control method to control and manage the hardware modules. The hardware modules for event recorder consist CPU, Digital Input and Output, Pulse Input, Communication, Control Panel and Crash Protected Memory. The real time operation system is used to totally control and manage the various hardware modules. The main function of control method is collection of train information, calculation of train speed, interface with other on-board control system, storing and retrieving train information, and communication with Control Panel. In Control Panel, it displays the current train speed and the status of event recorder effectively. Also user interface is provided in Control Panel.