• Food Science of Animal Resources
• /
• v.30 no.5
• /
• pp.722-729
• /
• 2010

The aim of this study was to evaluate the physico-chemical, sensory, and microbiological properties of ready-to-eat Korean traditional seasoned beef ribs ("galbi-jjim") prepared by sous-vide/cookchill technology during storage at three different temperatures (4, 10, and $20^{\circ}C$). Beef short ribs marinated in soy sauce for 24 h at $3^{\circ}C$ were packed with vegetables under vacuum. Vacuum-packed beef ribs mixed with vegetables were heated at $90^{\circ}C$ for 90 min in a water bath, and then immediately chilled below $3^{\circ}C$ within 120 min in an ice slurry. Physicochemical (pH, water activity, TBARS, $L^*a^*b^*$ color, and texture profile), sensory (appearance, odor, flavor, texture, and acceptance) and microbiological (Coliform, Escherichia coli, food-borne pathogenic bacteria) properties of the samples were determined during storage at different temperatures. Results showed that pH, $a_w$, and sensory evaluation of products were not affected in any consistent way as a function of either storage duration or temperature. Coliform, E. coli and food-borne pathogens were not detected during storage at any temperature. However, TBARS significantly increased during storage period (p<0.05). Based on TBARS values, SV/CC "galbi-jjim" can be stored for 15 d, 12 d and 1 d at 4, 10 and $20^{\circ}C$, respectively.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.2
• /
• pp.83-100
• /
• 1980

This study was intended to computerize the structural analysis of two-dimensional continuum by finite element method, and to provide a preparatory basis for more sophisticated and more generalized computer programs of this kind. A computer program, applicable to any shape of two-dimensional continuum, was formulated on the basis of 16-degree-of- freedom rectangular element. Various computational aspects pertaining to the implementation of finite element method were reviewed and settled in the course of programming. The validity of the program was checked through several case studies. To assess the accuracy and the convergence characteristics of the method, the results computed by the program were compared with solutions by other methods, namely the analytical Navier's method and the framework method. Through actual programming and analysis of the computed results, the following facts were recognized; 1) The stiffness matrix should necessarily be assembled in a condensed form in order to make it possible to discretize the continuum into practically adequate number of elements without using back-up storage. 2) For minimization of solution time, in-core solution of the equilibrium equation is essential. LDLT decomposition is recommended for stiffness matrices condensed by the compacted column storage scheme. 3) As for rectangular plates, the finite element method shows better performances both in the accuracy and in the rate of convergence than the framework method. As the number of elements increases, the error of the finite element method approaches around 1%. 4) Regardless of the structural shape, there is a uniform tendency in convergence characteristics dependent on the shape of element. Square elements show the best performance. 5) The accuracy of computation is independent of the interpolation function selected.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.1940-1949
• /
• 2015

This paper presents an Enhanced Particle Swarm Optimization (EPSO) to solve short-term hydrothermal scheduling (STHS) problem with non-convex fuel cost function and a variety of operational constraints related to hydro and thermal units. The operators of the conventional PSO are dynamically controlled using exponential functions for better exploration and exploitation of the search space. The overall methodology efficiently regulates the velocity of particles during their flight and results in substantial improvement in the conventional PSO. The effectiveness of the proposed method has been tested for STHS of two standard test generating systems while considering several operational constraints like system power balance constraints, power generation limit constraints, reservoir storage volume limit constraints, water discharge rate limit constraints, water dynamic balance constraints, initial and end reservoir storage volume limit constraints, valve-point loading effect, etc. The application results show that the proposed EPSO method is capable to solve the hard combinatorial constraint optimization problems very efficiently.

• Preventive Nutrition and Food Science
• /
• v.13 no.4
• /
• pp.348-353
• /
• 2008

Aerobic bacterial growth on Korean pan.fried meat patties as a primary quality deterioration factor was modeled as a function of temperature to estimate microbial spoilage on a real.time basis under dynamic storage conditions. Bacteria counts in the stretch.wrapped foods held at constant temperatures of 0, 5, 10 and $15^{\circ}C$ were measured throughout storage. The bootstrapping method was applied to generate many resampled data sets of mean microbial counts, which were then used to estimate the parameters of the microbial growth model of Baranyi & Roberts in the form of differential equations. The temperature functions of the primary model parameters were set up with confidence limits. Incorporating the temperature dependent parameters into the differential equations of bacterial growth could produce predictions closely representing the experimental data under constant and fluctuating temperature conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.6
• /
• pp.141-147
• /
• 1999

Optical disk technology with a laser beam for data recording and retrieval is one of the most promising route for high density information storage in multimedia era. As the storage density and data transfer rates are increased, mechanical issues, mainly noise and vibration, become critical. Rubber materials are extensively used in various machine design application, mainly for vibration/shock/noise control devices. Over the years an enormous effort has been put into developing procedures to provide properties of rubber components with complex shape and under pre-deformed state. In this paper, non-linear large deformations of a rubber mount for optical disk drive were investigated using the finite element method. A tension test of rubber material was performed, to calculate a strain energy function. According to the pre-deformed state, the variation of rubber mount stiffness were calculated and the reliability of numerical results were checked by compared with the measuring the deflection values. Also, the effects of the pre-deformed rubber mount on the system dynamic characteristics were investigated and the relation between the static stiffness variation of rubber mount and the natural frequence variation of system was discussed.

• Transactions of the Society of Information Storage Systems
• /
• v.9 no.1
• /
• pp.10-16
• /
• 2013

Through the rapid development of LED TV, a large-area edge-lit backlight unit is widely researched in the display industry for enhancing the optical efficiency, luminous uniformity and slim design. In addition, an edge-lit backlight unit includes many optical sheets such as reflection sheet, prism sheet and diffuser sheet. However the function can be replaced by the carefully patterned light guide plate (LGP). Micro patterns which located on the top and bottom surface of light guide plate was designed by ray-tracing optical simulation. The designed patterns improved the light characteristics of LGP, including optical extraction efficiency and intensity distribution uniformity. These results suggest that it is very effective method to design edge-lit LGP with micro-patterns on both sides for large-area display and to reduce the fabrication cost.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.2
• /
• pp.138-143
• /
• 2006

We developed a numerical simulator in order to study the Super-RENS/ROM (Super REsolution Near-Field Structure, Read Only Memory) using 3-dimensional FDTD (finite difference time domain) method. The simulation can be performed by three steps. In the first step, we utilized the vector-diffraction theory to calculate the characteristics of incident laser beam from the object-lens to the surface of the disk. At the second step, we fed the calculated result as an input for the main FDTD simulations on the optical layers in the disk structure. After performed the FDTD simulations, we took near-to-far field transformation for the reflected signal, from the surface of the disk to the detector. Finally, we can get reflected signal at the photo-diode. Using this developed simulator, we were able to study about the reading signal from various disk structures as a function of a laser beam position. We calculated reading signals for various pit sizes for Super-ROM structure, and it is found that the simple optical diffraction theory can not explain the reading mechanism of Super-ROM, and more complicated temperature dependent physics must be involved.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.4
• /
• pp.255-260
• /
• 2003

The complex capacitance analysis was performed in order to examine the potential-dependent EDLC characteristics of porous carbon electrodes. The imaginary capacitance profiles $(C_{im}\;vs.\;log\lf)$ were theoretically derived for a cylindrical pore and further extended to multiple pore systems. Two important electrochemical parameters in EDLC can be estimated from the peak-shaped imaginary capacitance plots: total capacitance from the peak area and $\alpha_0$ from the peak position. Using this method, the variation of capacitance and ion conductivity in pores can be traced as a function of electric potential. The electrochemical impedance spectroscopy was recorded on the mesoporous carbon electrode as a function of electric potential and analyzed by complex capacitance method. The capacitance values obtained from the peak area showed a maximum at 0.3V (vs. SCE), which was in accordance with cyclic voltammetry result. The ionic conductivity in pores calculated from the peak position showed a maximum at 0.2 V (vs. SCE), then decreased with an increase in potential. This behavior seems due to the enhanced electrostatic interaction between ion and surface charge that becomes enriched at more positive potentials.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.49-56
• /
• 2013

In this paper, for constrained optimization problem, one multi-objective optimization algorithm that ensures both performance robustness and constraint feasibility is proposed when uncertainties are involved in design variables. In the proposed algorithm, the gradient index of objective function assisted by design sensitivity with the help of finite element method is applied to evaluate robustness; the reliability calculated by the sensitivity-assisted Monte Carlo simulation method is used to assess the feasibility of constraint function. As a demonstration, the performance and numerical efficiency of the proposed method is investigated through application to the optimal design of TEAM problem 22--a superconducting magnetic energy storage system.

• Water for future
• /
• v.24 no.4
• /
• pp.49-58
• /
• 1991

Flood routing in the Youngsan River was performed for the flood event of July, 1989 by two finite difference methods. The Saint Venant eq., a kind of hyperbolic partial differential equation is employed as governing equation and the explicit scheme (Leap Frog) and implicit scheme (Preissmann) are used to discretize the GE. As for the external boundary conditions, discharge and tidal elevation are upstream and downstream BC, respectively and estuary dam is included in internal BC. Lateral inflows and upstream discharges are the hourly results from storage function method, At Naju station, a Relatively upstream points in this river, the outputs are interpreted as good ones by comparing two numerical results of FDMs with the observed data and the calibrated results by storage function method. and two computational results are compared at the other sites, from middle stream and downstream points, and thus are considered reliable. Therefore, we can conclude from this research that these numerical models are adaptable in simulating and forecasting the flood in natural channels in Korea as well as existing hydrologic models. And the study about optimal gate control at the flood time is expected as further study using these models.