• The Journal of Engineering Geology
• /
• v.31 no.1
• /
• pp.19-30
• /
• 2021

This study evaluated the injection rate and the injection efficiency of the artificial recharge in the upper drought-prone watershed region, where the remaining water was used for injection, by using a numerical model to secure water during a drought. As a result of a numerical model under the condition of diverse injection rates per a well and hydraulic characteristics of the aquifer, the optimal injection rate per a well was estimated as 50.0 ㎥/day, and the injection efficiency was simulated as 33.2% to 81.2% of the total injection volume. As the injection time was shorter, the injection efficiency tented to increase non-linearly. As the injection rate increased, the residual storage in aquifer increased and available groundwater amount also increased, which could be advantageous for drought relief. For a more accurate assessment of injection efficiency, the model will be validated using the field injection data and optimum scenarios will enable the efficient operation of the artificial recharge system in the study area.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.211-215
• /
• 2022

Air distribution occupies an important position in the smart unit load container design process for agricultural products. Inner air may be uncomfortable because of its temperature, speed, direction, and volume flow rate. It doesn't matter how efficient the ventilation equipment is if the air is not distributed well. The main aim of this study was to design the inlet and outlet fan locations of smart unit load container for agricultural products. A numerical study was performed on the effects of the location of inlet air and outlet air in relation to the container cooling sources on air distribution and thermal comfort. A concept of combining inner container cooling sources with the exhaust outlet was employed in this investigation. Also, in this research, the developed CFD (Computational Fluid Dynamics) models were thoroughly validated. This system was adopted for use in container spaces, where the exhaust outlet was located. In this study, the location of the inlet was derived through CFD for a container with a size of 1,100×1,100×1,700 mm, and it was derived that the inlet was located at the center of the lower part of the container for efficient air flow. It was efficient to position the outlet through the air inlet in the center of the lower part of the container at the top of the same side.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.6
• /
• pp.791-801
• /
• 2022

Boil-dried concentrates (BDC) and steam-dried concentrates (SDC) were prepared from highly nutritious olive flounder Paralichthys olivaceus roes (OFR) as seafood processing by-products and their nutritional characteristics were investigated. Although SDS-PAGE profiles of the BDC and SDC proteins were similar to each other, it was observed that three of the five OFR protein bands in the 50-100 kDa range had disappeared. We also detected significant differences in the Hunter's color of the two concentrates in terms of color difference (𝚫E) and whiteness. The recovery amounts of BDC and SDC prepared from 100 g of OFR were 18.6 and 21.4 g, respectively, with respective protein contents of 67.7% and 68.9%. The main amino acids of OFR and concentrate proteins were valine, leucine, lysine, arginine, aspartic acid, glutamic acid and alanine, whereas major minerals were sulfur, potassium, sodium and phosphorus, the amounts of which in concentrates had been significantly reduced. We established that by sterilizing, inactivating endogenous enzymes, and inhibiting microbial growth, the cook-dried process contributes to enhancing the concentration and storage stability of nutrients by reducing water activity, volume, and weight. Accordingly, we suggest that concentrates (BDC and SDC) prepared from OFR have considerable potential as nutritionally fortified materials.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.8
• /
• pp.259-268
• /
• 2022

With prosperous usage of cloud services to improve management efficiency due to the explosive increase in data volume, various cryptographic techniques are being applied in order to preserve data privacy. In spite of the vast computing resources of cloud systems, decrease in storage efficiency caused by redundancy of data outsourced from multiple users acts as a factor that significantly reduces service efficiency. Among several approaches on privacy-preserving data deduplication over encrypted data, in this paper, the research results for improving efficiency of encrypted data deduplication using trusted execution environment (TEE) published in the recent USENIX ATC are analysed in terms of security and efficiency of the participating entities. We present a way to improve the stability of a key-managing server by integrating it with individual clients, resulting in secure deduplication without independent key servers. The experimental results show that the communication efficiency of the proposed approach can be improved by about 30% with the effect of a distributed key server while providing robust security guarantees as the same level of the previous research.

• Journal of Korean Port Research
• /
• v.10 no.1
• /
• pp.1-14
• /
• 1996

Rapid change in the technological environment of marine transportation and the development of the ocean shipping industry have fostered a revolution in the port system. This in turn has caused major changes in the function and use of port in Korea. Aside from this, Mokpo Port, however continues to decline, because the existing port facilities and related subsystem are already obsolete with no chance of regaining operational effectiveness and treatment for proper implementation. Although a few studies have been done on the Mokpo Port, has not been found, any reseach for the analytical approach to the transportation system of it. This paper aims to make an extensive analysis of the physical distribution system in Mokpo Port focusing on the coordination of subsystems such as navigational aids system. The base of introduced simulation tool here is the queueing theory. The overall findings are as follows: 1. Among those vessels called at Mokpo Port in 1994, 556 ships(2,736,669 G/T) are oceangoing while 8155 ships(2,587,217 G/T) are domestic. The average size of oceangoing vessels is 4,922,1 G/T, and the domestic is 317,8 G/T. The average arrival interval and service time of the domestic vessels are 6.0 hours and 24.1 hours respectively marking the berth occupation rate over 100%. Those for oceangoing vessels are 34.5 hours, 120.0 hours and 37.2%. In order to maintainin the berth occupation rate to 70% the capacity considering the 1994 of domestic piers must be extended to 145% and oceangoing vessels must be increased to 165%. 2. The capacity of approaching channel is enough to handle the total traffic volume of 3. Tugs are sufficiently being provided to handle all ships requiring their services 4. The capacity of storage and inland transportation systems are sufficient to handle the throughput and the yard stroage utilization rate of No.1 - No.5 is 4.5% and No.6 is 30% of 1993's. 5. The utilization rate of LLC(Level Looping Crane) and PNT(PNeumaTic) are 2.7% and 18.8%, respectively.

• Journal of Adhesion and Interface
• /
• v.24 no.1
• /
• pp.9-16
• /
• 2023

Silicon has been studied as an anode material for next-generation lithium ion batteries due to its high theoretical electrochemical capacity. However, the extreme volume change during the lithiation/delithiation and the inherently low electronic conductivity of silicon hamper the practical application of silicon anodes. Conductive polymer binders are effective means to solve these problems, and it has been reported that the performance of the silicon anode can be greatly improved through the proper molecular design of the conductive polymer binders. In this paper, representative recent studies on conductive polymer binders for silicon anodes will be introduced, and through this, binder design strategies to overcome the limitations of silicon anodes will be explored.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.270-270
• /
• 2023

습지 생태계는 복잡한 물리적 생지화학적 프로세스의 상호작용이 있으나, 습지 생태계의 건강성 회복을 위한 첫 번째 단계는 습지 생태계에서의 물순환에 대한 정확한 이해일 것이다. 또한 지역적인 물 균형 및 생태계 보전에서 습지를 활용하기 위해서도 습지 물순환에 대한 정량적인 이해는 필수적이다. 그러나, 습지 물순환의 이해를 위해 필수적인 관측 자료들은 현장 측정으로 획득하기 어려운 자료이거나 비용적인 문제로 인하여 관측이 어려운 실정이다. 이에 본 연구에서는 Sentinel-2 위성 자료를 활용하여 습지의 유입량을 추정하기 위한 절차를 제시하고자 한다. 이를 위해 한반도 동남부의 낙동강에 위치한 주요 다목적댐의 자료를 활용한 분류 기반의 인공지능 모델이 설계된다. 인공지능의 학습을 위한 입력자료는 아래와 같은 절차에 의해 만들어진다. 1) 다목적댐의 수위-물 체적 관계를 이용하여 수위-수표면적 관계 곡선 도출. 2) 수위-수표면적 관계 곡선과 DEM을 활용하여 물과 육지 영역을 구분하는 식별자를 도출. 3) Sentinel-2 위성 정보와 물-육지 식별자를 비교하는 랜덤 포레스트 모델을 설계. 4) 위성 정보의 물-육지 정보로부터 미계측 습지 지역의 물과 육지를 식별할 수 있는 식별자 도출. 이러한 과정을 경유하여 추정된 습지의 수표면적과 습지 지역의 DEM을 결합함으로써 습지의 수위-수표면적-물 체적 관계 곡선이 산정되어, 최종적으로 습지의 유입량이 모의된다. 모의된 습지 유입량은 다양한 수문 모델의 매개변수를 추정하는데 활용될 수 있을 것이며, 검증된 수문 모델을 활용하여 습지의 물순환의 이해도를 증진시킬 수 있을 것으로 기대된다.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.73-73
• /
• 2003

The present study examined the possibility of long term storage, by cryopreservation in liquid nitrogen, of the sperm of Filefish (Thamnaconus septentrionalis), and the changes in motility, survival rate and ultrastructure of the sperm after freezing and thawing. The sperm was collected by stripping and stored on ice until experiments. For selection of the immobilizing solution, diluted artificial seawater (ASW) of 20, 30 and 40% were tested. The sperm motility was significantly inhibited in 30% ASW, and restored entirely after 100% ASW was added again. Two cryoprotectants, dimethyl sulfoxide ($Me_2$SO) and glycerol, were added to 30% ASW to formulate the extenders at the concentrations between 5 to 20% by volume for freezing. The sperm was diluted at the ratio of 1 :6 with the extenders, inserted into 0.5ml plastic straws and frozen at a freezing rate of $50^{\circ}C$/min to $-100^{\circ}C$ after equilibration for 10 min at room temperature, followed by plunging into liquid nitrogen. The straws were thawed in a $30^{\circ}C$ water bath for 15 sec. The highest post-thawed sperm motility and survival rate were obtained with 5% glycerol Afterward, the effect of different freezing rates was examined using 5% glycerol as a cryoprotectant, and the rate of $20^{circ}C/min to $-80^{\circ}C$ showed the best result Some ultrastructural changes of sperm, such as the detachment of plasmatic and nuclear membranes, destruction of mitochondria, were observed after cryopreservation. Morphological normality of the sperm in 5% glycerol frozen at the ratio of 1$0^{\circ}C$/min to $-80^{\circ}C$ was better than that of others.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.130-130
• /
• 2021

The increasing effect of urbanization has been more apparent through flooding and downstream water quality especially from heavy rainfalls. In response, stormwater runoff management solutions have focused on runoff volume reduction and treatment through infiltration. However, there are areas with low infiltration soils or are experiencing more dry days and even drought. In this study, a lab-scale infiltration system was used to compare the applicability of two types of soil as base layer in gravel-filled infiltration systems with emphasis on runoff capture and suspended solids removal. The two types of soils used were sandy soil representing a high infiltration system and clayey soil representing a low infiltration system. Findings showed that infiltration rates increased with the water depth above the gravel-soil interface indicating that the available depth for water storage affects this parameter. Runoff capture in the high infiltration system is more affected by rainfall depth and inflow rates as compared to that in the low infiltration system. Based on runoff capture and pollutant removal analysis, a media depth of at least 0.4 m for high infiltration systems and 1 m for low infiltration systems is required to capture and treat a 10-mm rainfall in Korea. A maximum infiltration rate of 200 mm/h was also found to be ideal to provide enough retention time for pollutant removal. Moreover, it was revealed that low infiltration systems are more susceptible to horizontal flows and that the length of the structure may be more critical that the depth in this condition.

• Journal of Korea Society of Industrial Information Systems
• /
• v.28 no.6
• /
• pp.107-113
• /
• 2023

In the field of ammunition, storage performance is recognized as important, and the moisture-proof performance of packaging containers is very important. In the ammunition field, paper cans with a multi-layered structure are mainly used as packaging containers. It is made by layering materials that play various roles. These packaging containers are mainly evaluated for moisture-proof performance according to the Korean Industrial Standard KS T 1314. The moisture permeability is determined through linear regression analysis of the change in weight of the moisture absorbent added inside. In this study, the effect of the amount of desiccant added on the moisture permeability test results of packaging containers was confirmed. It is considered appropriate that the amount of desiccant used in testing ammunition packaging containers be approximately 70% or more of the internal volume.