• Journal of Animal Environmental Science
• /
• v.6 no.2
• /
• pp.73-81
• /
• 2000

A two-phase anaerobic digestion system for the treatment of swine waste was constructed in a commercial hog farm. The digester system was composed of 4 major units; slurry storage pit, acidogenic digester, methanogenic digester and sedimentation pit. A biogas boiler unit was also attached to maintain the digester temperature of 37$^{\circ}C$. Substrate lading was made with 2hr-interval by pumping about 2.1$m^3$ of slurry type swine waste from the slurry pit into the acidogenic digester, which corresponds to hydraulic retention time of 4 days for the acidogenic digester and of 11 days for the methanogenic digester. Digester temperature were well maintained as the set temperature of 37$^{\circ}C$ in the methanogenic digester, while the temperature in the acidogenic digester showed around 34$^{\circ}C$. pH also showed a steady-state results of 7.3 in the acidogenic digester and of 7.6 in the methanogenic digester during the operation period. Average biogas production rate was 0.66$m^3$/$m^3$ digester volume. Reduction rate of total solid and volatile solid were 42.8% and 5.8%, respectively. Total nitrogen and ammonia nitrogen were not reduced during the anaerobic fermentation, however, most of VFAs seemed to be converted to the biogas,. These fermentation performance data may suggest that he newly developed a two-phase anaerobic digester for the swine waste treatment worked so successfully.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.2
• /
• pp.15-21
• /
• 2012

MTBE (Methyl tertiary-butyl ether) has been commonly used as an octane enhancer to replace tetraethyl lead in gasoline, because MTBE increases the efficiency of combustion and decreases the emission of carbon monoxide. However, MTBE has been found in groundwater from the fuel spills and leaks in the UST (Underground Storage Tank). Fenton's oxidation, an advanced oxidation catalyzed with ferrous iron, is successful in removing MTBE in groundwater. However, Fenton's oxidation requires the continuous addition of dissolved $Fe^{2+}$. Zero-valent iron is available as a source of catalytic ferrous iron of MFO (Modified Fenton's Oxidation) and has been studied for use in PRBs (Permeable Reactive Barriers) as a reactive material. Therefore, this study investigated the condition of optimization in MFO-PRBs using waste zero-valent iron (ZVI) with the waste steel scrap to treat MTBE contaminated groundwater. Batch tests were examined to find optimal molar ratio of MTBE : $H_2O_2$ on extent to degradation of MTBE in groundwater at pH 7 with 10% waste ZVI. As the results, the ratio of optimization of MTBE to hydrogen peroxide for MFO was determined to be 1:300[mM]. The column experiment was conducted to know applicability of MFO-PRBs for MTBE remediation in groundwater. As the results of column test, MTBE was removed 87% of the initial concentration during 120days of operational period. Interestingly, MTBE was degraded not only within waste ZVI column but also within sand column. It means the aquifer may affect continuously the MTBE contaminated groundwater after throughout the waste ZVI barrier. The residual products showed acetone, TBF (Tert-butyl formate) and TBA (Tert-butyl acetate) during this test. The results of the present study showed that the recycled materials can be effectively used for not only a source of catalytic ferrous iron but also a reactive material of the MFO-PRBs to remove MTBE in groundwater.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.54-61
• /
• 2005

An aquifer thermal energy storage (ATES) system can be very cost-effective and renewable energy sources, depending on site-specific parameters and load characteristics. In order to develop the ATES system which has certain hydrogeological characteristics, understanding the thermohydraulic process of an aquifer is necessary for a proper design of an aquifer heat storage system under given conditions. The thermohydraulic transfer for heat storage was simulated according to two sets of simple pumping and waste water reinjection scenarios of groundwater heat pump system operation in a two-layered aquifer model. In the first set of the scenarios, the movement of the thermal front and groundwater level was simulated by changing the locations of injection and pumping wells in a seasonal cycle. However, in the second set the simulation was performed in the state of fixing the locations of pumping and injection wells. After 365 days simulation period, the shape of temperature distribution was highly dependent on the injected water temperature and the distance from the injection well. A small temperature change appeared on the surface compared to other simulated temperature distributions of 30 and 50 m depths. The porosity and groundwater flow characteristics of each layer sensitively affected the heat transfer. The groundwater levels and temperature changes in injection and pumping wells were monitored and the thermal interference between the wells was analyzed to test the effectiveness of the heat pump operation method applied.

• Journal of Environmental Science International
• /
• v.4 no.3
• /
• pp.153-167
• /
• 1995

Recycling is receiving increasing social attention today as our nation begins to grapple with the significant problems caused by huge amount of municipal solid waste. The topic of recycling is not simple but extremely complicated. This study attempts to provide basic data and policy options for expanding and improving separated collection and recycling in public residential areas, through three case study of apartment housing areas in Taegu Metropolitan City. The main results of this study are summarized as follows. For the significant period of time, all three case areas had in common the extreme difficulty in establishing and operating the system of connecting public participation, collection and storage, transportation, and actual recycling of materials because of a variety of problems involved in this process. Both amounts of and prices for collected materials fluctuated considerably over time mainly due to monthly changes in recyclable home materials and the dynamic nature of recycling markets. Public questionnaire survey revealed the very high level of participation in separated collection, not only because almost all respondents well understood the necessity and importance of recycling, but because they also knew how to do separated collection. But overall activities were rated low and most respondents suggested the enlargement of public participation, the improvement of collection and storage facilities, and collection transportation networks. In particular, most respondents had little experience of using recycled Products and used mainly reproduced soap and bathroom tissue. Furthermore, they were considerably unsatisfied with low variety and quality of recycled products, their high prices and low availability in the market. Finally potential policy options and activities for improving separated collection and recycling are suggested.

• Mycobiology
• /
• v.47 no.1
• /
• pp.97-104
• /
• 2019

Mushroom cultivation has gained increased attention in recent years. Currently, only four types of spawn, including sawdust spawn, grain spawn, liquid spawn, and stick spawn, are commonly available for mushroom cultivation. This limited spawn diversity has led to difficulty in selecting suitable inoculum materials in some cultivation. In this study, three small blocks of lignocellulosic agro-wastes and one block of a synthetic matrix were prepared as support for growing Pleurotus ostreatus in liquid medium. Mycelium-adsorbed blocks were then evaluated for their potential as block spawn for fructification. Our results indicated that the edible fungus was adsorbed and abundantly grew internally and externally on loofah sponge and synthetic polyurethane foam (PUF) supports and also has the ability to attach and grow on the surface of sugarcane bagasse and corncob supports. The mycelia of P. ostreatus adhered on corncob exhibited the highest metabolic activity, while those on the PUF showed the least activity. Mycelial extension rates of block spawns made of agro-waste materials were comparable to that of sawdust spawn, but the block spawn of PUF showed a significantly lower rate. No significant differences in cropping time and yield were observed among cultivations between experimental block spawns and sawdust spawns. Moreover, the corncob block spawn maintained its fruiting potential during an examined period of 6-month storage. The developed block spawn could be practically applied in mushroom cultivation.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.4
• /
• pp.375-387
• /
• 2019

In this study, the radiation dose rates for the design basis fuel of 360 assemblies CANDU spent nuclear fuel transportation cask were evaluated, by measuring radiation source terms for the design basis fuel of a pressurized heavy water reactor. Additionally, radiological safety evaluation was carried out and the validity of the results was determined by radiological technical standards. To select the design basis fuel, which was the radiation source term for the spent fuel transportation cask, the design basis fuels from two spent fuel storage facilities were stored in a spent fuel transportation cask operating in Wolsung NPP. The design basis fuel for each transportation and storage system was based on the burnup of spent fuel, minimum cooling period, and time of transportation to the intermediate storage facility. A burnup of 7,800 MWD/MTU and a minimum cooling period of 6 years were set as the design basis fuel. The radiation source terms of the design basis fuel were evaluated using the ORIGEN-ARP computer module of SCALE computer code. The radiation shielding of the cask was evaluated using the MCNP6 computer code. In addition, the evaluation of the radiation dose rate outside the transport cask required by the technical standard was classified into normal and accident conditions. Thus, the maximum radiation dose rates calculated at the surface of the cask and at a point 2 m from the surface of the cask under normal transportation conditions were respectively 0.330 mSv·h^-1 and 0.065 mSv·h^-1. The maximum radiation dose rate 1 m from the surface of the cask under accident conditions was calculated as 0.321 mSv·h^-1. Thus, it was confirmed that the spent fuel cask of the large capacity heavy water reactor had secured the radiation safety.

• Journal of Nutrition and Health
• /
• v.22 no.1
• /
• pp.1-8
• /
• 1989

The study was attempted to observe effects of voluntary exercise on energy expenditure and on storage of excessive energy into body fat in adult mice. Mice, body weight 25-30g, were divided into two groups, exercise and sedentary group. Voluntary exercize by running wheel was allowed for former group but not for the mice of the latter group which were restricted by limiting space allowance 13.5$\times$11.5$\times$15.0cm per mouse. During a period of 4 weeks of feeding trial, they were fed ad libitum starch-casein based diet added with $^3\textrm{H}$-glucose (D-[1-$^3\textrm{H}$(N)]-glucose) at a level of 20 nCi per g of diet. Measurements were made to study hematology, lipase activity in epididymal adipose tissue, total contents of body waste and fat, and radiactivity of $^3\textrm{H}$-glucose incoporated into body fat. Dietary intake, body weight gain and amount of voluntary physical activities were also measured. The results obtained ard summarized as follows; 1) Amount of metabolizable energy intake, body weight gain and body fat were not statistically different between the two group. However, mice of the exercise group tended to show lower body weight gain body fat contants, but higher energy expenditure than those of the sedentary group. 2) Radioactivity of $^3\textrm{H}$-glucose incoporated into body fat appeared lower for exercise group expressd on a whole body fat basis. The activity was, however, higher for exercise group when expressed based on per g of fat compared to that of sedentary group. 3) Exercise group showed also higher activity of lipase in epididymal adipose tissue than the other group. 4) Mice whose physical activities were restricted appeared to have lower levels of hemoglobin and hematocrit values than of the exercise group. These results seem to support the theory that turn-over rate of body fat is activated by exercise and to suggest that consumed energy is to be converted primarily into body fat before its use as energy source by oxidation even during a period of continuous energy expenditure by exercise.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.317-323
• /
• 2017

In this study, the heating performance and the energy saving effect of the heat pump system using hot waste water(waste heat) of the thermal power plant discharged from a thermal power plant to the sea were analyzed. The greenhouse area was $5,280m^2$ and scale of the heat pump system was 120 RT(Refrigeration Ton), which was divided into 30 RT, 40 RT and 50 RT. The heat pump system consisted of the roll type heat exchangers, hot waste water transfer pipes, heat pumps(30, 40, 50 RT), a heat storage tank and fan coil units. The roll type heat exchangers was made of PE(Poly Ethylene) pipes in consideration of low cost and durability against corrosion, because hot waste water(sea water) is highly corrosive. And the heating period was 5 months from October to February. During the heating performance test(12 hours), the inlet water temperature of evaporator was changed from $32^{\circ}C$ to $26^{\circ}C$, and heat absorption of he evaporator was changed from 175 kW to 120 kW. The inlet water temperature of the condenser rose linearly from $15^{\circ}C$ to $50^{\circ}C$, and the heat release of condenser was reduced by 40 kW from 200 kW to 160 kW. And the power consumption of the heat pump system increased from 30 kW to 42 kW. When the inlet water temperature of condenser was $15^{\circ}C$, the heating COP(Coefficient Of Performance) was over 7.0. When it was $30^{\circ}C$, it dropped to 5.0, and when it was above $40^{\circ}C$, it decreased to less than 4.0. It was analyzed that the reduction of heating energy cost was 87% when compared to the duty free diesel that the carbon dioxide emission reduction effect was 62% by recycling the waste heat of the thermal power plant as a heat source of the heat pump system.

• Journal of the Korea Concrete Institute
• /
• v.25 no.3
• /
• pp.321-329
• /
• 2013

Recently, the medium-low level radioactive waste from nuclear power plant must be transported from temporary storage to the final repository. Medium-low level radioactive waste, which is composed mainly of the liquid ion exchange resin, has been consolidated with cementitious material in the plastic or iron container. Since cementitious material is brittle, it would generate cracks by impact load during transportation, signifying leakage of radioactive ray. In order to design the safety transporting equipment, there is a need to check the compressive strength of the current waste. However, because it is impossible to measure strength by direct method due to leakage of radioactive ray, we will estimate the strength indirectly by the dynamic modulus of elasticity. Therefore, it must be identified the relationship between of strength and dynamic modulus of elasticity. According to the waste acceptance criteria, the compressive strength of cement based solid is defined as more than 3.44 MPa (500 psi). Compressive strength of the present solid is likely to be significantly higher than this baseline because of continuous hydration of cement during long period. On this background, we have tried to produce the specimens of the 28 day's compressive strength of 3 to 30 MPa having the same material composition as the solid product for the medium-low level radioactive waste, and analyze the relationship between the strength and the dynamic modulus of elasticity. By controling the addition rates of AE agent, we made the mixture containing the ion exchange resin and showing the target compressive strength (3~30 MPa). The dynamic modulus of elasticity of this mixtures is 4.1~10.2 GPa, about 20 GPa lower in the equivalent compressive strength level than that of ordinary concrete, and increasing the discrepancy according to increase strength. The compressive strength and the dynamic modulus of elasticity show the liner relationship.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.143-150
• /
• 2009

Spatial data warehouses are a system managing manufactured data through ETL step with extracted spatial data from spatial DBMS or various data sources. In load period, duplicated spatial data in the same subject are not useful in extracted spatial data dislike aspatial data and waste the storage space by the feature of spatial data. Also, in case of extracting source data on heterogeneous system, as those have different spatial type and schema, the spatial extract method is required for them. Processing a step matching address about extracted spatial data using a standard Geocoding DB, the exiting methods load formal data set. However, the methods cause the comparison operation of extracted data with Geocoding DB, and according to integrate spatial data by subject it has problems which do not consider duplicated data among heterogeneous spatial DBMS. This paper proposes efficient extracting method to integrate update query extracted from heterogeneous source systems in data warehouse constructer. The method eliminates unnecessary extracting operation cost to choose related update queries like insertion or deletion on queries generated from loading to current point. Also, we eliminate and integrate extracted spatial data using update query in source spatial DBMS. The proposed method can reduce wasting storage space caused by duplicate storage and support rapidly analyzing spatial data by loading integrated data per loading point.