• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.97-105
• /
• 2017

Because asphalt is a solid at normal temperature and is not a hazardous material as stipulated in the Safety Management Act on Hazardous Materials, it is often recognized as having no risk of fire or explosion. On the other hand, it is as dangerous as flammable liquid because it is heated to $170-180^{\circ}C$ and stored in a storage tank. This study analyzed the risk of fire and explosion during the storage and handling of asphalt and the actual conditions of asphalt regulations by fire service organizations. Moreover, this study analyzed the domestic case of explosions in the production process of asphalt concrete (ASCON) and domestic and foreign cases of asphalt storage tank explosions. The analysis suggested that unlike Japan, Korea has no asphalt regulations in fire service organizations. Explosions can occur when ignition is delayed after fuel is sprayed on the dryer drum burner of the aggregates during the production of ASCON. A physical explosion can occur in the storage tank when environmental purification facilities suddenly work strongly to remove air pollutants or bad smells during the heating of asphalt in an asphalt storage tank. In addition, explosions can occur when fires such as welding is performed in the asphalt storage tank.

• Journal of Korea Water Resources Association
• /
• v.36 no.3 s.134
• /
• pp.385-398
• /
• 2003

The concept of the effective storage ratio has been suggested to determine the size of detention pond by the previous researchers. The 11 pump - pond facilities in Dongdu-chun city were selected to analyze the critical duration for design rainfall and the storage ratio for each rainfall duration in this study It has been then found that the criteria of the maximum storage ratio is not reasonable for determining the size of detention pond because the difference of storage ratio with respect to each rainfall duration is too small. Moreover, since the size of pond compared with the pump capacity is not always big enough, the pump should be frequently operated, which may result in pump failure. Thus, the pond should be sufficiently sized to prevent the possibility of the pump failure due to frequent operation. According to the analyses for changing pump capacity, it has been found that if the function of the pond compared with the pump is concentrated, determining the size of pond based on the storage ratio is operationally feasible for even small basin. Thus, an improved procedure based on the storage ratio for determining the size of detention pond in small basin has been suggested. The results by the proposed procedure considering pump switching frequency may lead to reasonable pump operation. A simple linear programming model has been also adopted to figure out the relationship between pump capacity and pond size. It has been shown that the determination lot the size of detention pond based on conventional hydrologic flood routing in pond is feasible for only urban districts not rural areas.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.1
• /
• pp.4038-4051
• /
• 1976

This study was intended to provide the basic design creteria for the refrigerated storage, and to estimate the required optimum capacity of refrigerator for the different sizes and kinds of the existing fruit storage. The structural characteristics of the existing fruit storages in Pyungtaek-khun of Kyungki-do were surveyed. The average out-door air temperature during the expected storage life after harvesting, was obtained by analyzing the weather information. The heat transfer rates through the different models of storage walls were estimated. The refrigerating load required for different models of fruit storage was analyzed in the basis of out-door air temperature. The results obtained in this study are summarized as follows: 1. The fruit storages surveyed were constructed on-ground, under-ground and sub-ground type buildings. The majority of them being the on-ground buildings are mostly made of earth bricks with double walls. Rice hull was mostly used as the insulating materials for their walls and ceilings. About 42% of the buildings were with the horizontal ceiling, 22% with sloped ceiling, and about 36% without ceiling. About 60% of the storage buildings had floor without using insulated material. They were made of compacted earth. 2. There is no difference in heat transfer among six different types of double walls. The double wall, however, gives much less heat transfer than the single wall. Therefore, the double wall is recommended as the walls of the fruit storage on the point of heat transfer. Especially, in case of the single wall using concrete, the heat transfer is about five time of the double walls. It is evident that concrete is not proper wall material for the fruit storage without using special insulating material. 3. The heat transfer through the storage walls is in inverse proportion to the thickness of rice hull which is mostly used as the insulating material in the surveyed area. It is recommended that the thickness of rice hull used as the insulating material far storage wall is about 20cm in consideration of the decreasing rate of heat transfer and the available storage area. 4. The design refrigerating load for the on-ground storages having 20 pyung area is estimated in 4.07 to 4.16 ton refrigeration for double walls, and 5.23 to 6.97 ton refrigeration for single walls. During the long storage life, however, the average daily refrigerating load is ranged from 0.93 to 0.95 ton refrigeration for double walls, and from 1.15 to 1.47 ton refrigeration for single walls, respectively. 5. In case of single walls, 50.8 to 61.4 percent to total refrigerating load during the long storage life is caused by the heat transferred into the room space through walls, ceiling and floor. On the other hand, 39.1 to 40.7 percent is for the double walls. 6. The design and average daily refrigerating load increases in linear proportion to the size of storage area. As the size increases, the increasing rate of the refrigerating load is raised in proportion to the heat transfer rate of the wall. 7. The refrigerating load during the long storage life has close relationship to the out-door air temperature. The maximum refrigeration load is shown in later May, which is amounted to about 50 percent to the design refrigerating load. 8. It is noted that when the wall material having high heat transfer rate, such as the single wall made of concrete, is used, heating facilities are required for the period of later December to early February.

• KIEAE Journal
• /
• v.8 no.6
• /
• pp.79-87
• /
• 2008

The purpose of this study is to identify the planning features of apartments that are people-friendly, nature-friendly and ones that improve the quality of the apartments through sustainable design characteristics found in the apartment community space. This study found the sustainable design characteristics through the case of 8 environment-friendly apartment in the Seoul-Gyeunggi area. Sustainable design was categorized into three areas a) social sustainability b) economic sustainability c) ecological sustainability. The major findings are summarized as follows: First, socially sustainable design which included plans for various types of squares, spaces for pedestrians showed high application of universal design plans. While, plans to maximize open spaces that facilitate the social exchanges among residents showed low application. Second, economically sustainable design showed high application in terms of access to public transportation and bicycle storage facilities. However, planning factors such as alternative energy facilities, recyclable materials, reuse of rainwaterand heavy water showed low application. Third, environmentally sustainable design included high application of promenades, artificially created green space and various types of water space. On the other hand, nature study centers, biotope and environment friendly parking space showed low application.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.4
• /
• pp.314-318
• /
• 1984

China has made rapid strides in agricultural production during the past few years. Although the absence of any serious climatic disturbances is a contributing factor, implementation of the responsibility system to reward peasant families for their initiatives has been by far the most significant. This has resulted in increased specialization, a greater requirement for technical adivsory services, and a much higher demand for farm equipment and production inputs. The revamped system has brought with it some problems such as differences in income between the most progressive producers and their less successful neighbours and urban workers, a shortage of storage, transport and processing facilities, and a strain on the national treasury to continue to subsidize farm prices. Demand for fertilizers has been increasing at a fast rate, especially for nitrogen. This has led to a serious imbalance in nutrient use which must be corrected if the current momentum in improving crop yields is to be maintained. Following a decade of total stagnation during the Cultural Revolution, agricultural research and education facilities are being strengthened. Younger scientists, many with overseas training, are being placed in key positions. China is still a developing country, and much remains to be done; however, progress in the last decade, and especially in the past five years, has been remarkable.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.303-306
• /
• 2003

To reduce the storage space of spent fuels used at the atomic power plants all over the world, the uranium elements contained in the spent fuels is being extracted and effectively stored. For this, the spent fuel are oxidized and deoxidized. In this study, it is produced conceptual design specification about the spent fuel management technology research and test facilities have been produced. The first considered processes in the facilities is the metal conversion furnace in the dry environment. Since this process is operates at the high temperature range, we have to consider heat-resisting designs for the device. For the heat-resisting designs, we have surveyed and analyzed technical references for material properties. Also, we have determined the temperature distribution condition of the device based on experimental results. We have calculated thermal stress and strain of each devices by the commercial analysis software, I-DEAS. By using the results, we have analyzed design configurations of the point at issue by thermal effects, and suggested alternative design configurations. It is experimented for inspecting confidence rate of heat strain. Based on these results, necessary design specifications for heat-resisting design have been produced.

• Journal of the Korean Institute of Gas
• /
• v.1 no.1
• /
• pp.73-80
• /
• 1997

This study was performed to develop the dispersion modeling methodology for quantitative prediction of the hazard distance or toxic buffer distance by comparing 10-min average, 30-min average, and 1-hr average maximum ground-level concentration with $Cl_2$ regultaion concentration, IDLH and ERPG-3 concentration for hazardous toxic gas, $Cl_2$ releases from the storage tank of the chemical plant facilities. For this dispersion modeling, the source term model, dispersion model, meteorological and topographical data are incorporated into the SuperChems model, and then the effects of the atmospheric stability, wind speed, and surface roughness length changes on the maxum ground-level concentration were estimated.

• Journal of Korean Institute of Industrial Engineers
• /
• v.12 no.1
• /
• pp.119-131
• /
• 1986

Described in this paper is a modelling methodology for mass production system simulation. The mass production system under consideration consists of various types of flow lines, special purpose production facilities, conveyor lines, palletized carts, and storage facilities. This type of production system is typical in home appliance industry, automobile industry, footwear industry, etc. where a variety of product mix are mass-produced. The modelling methodology is based on the "discrete-event formalism", and an "activity-oriented world view" is adopted to formalize the system description. A distinctive feature of the modelling methodology is that only the static structure (ie, system components) is included in the fixed model. The dynamic structure of the system is specified through a "data-driven" mechanism, which is an extension of the "experimental frame" concept. Each type of system components (ie, flow line, conveyors, carts, etc.) is formally modeled by using Activity Cycle Diagrams. The issue of "model structuring" is also addressed. The modeling methodology has been successfully applied in a real simulation study of a mass production system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.200.1-200.1
• /
• 2011

Underground air is a special energy source in Jeju and distributes lava cave, pyroclastic, open joint, and crushing zone. A possible area to utilize underground air is 85% of Jeju except to the nearby area of Sambang Mt. and 25m high coastal area from sea level. In Jeju, underground air is used for heating agricultural facilities such as greenhouse cultivated mangos, Hallbong and mandarin orange, pigsty, mushroom cultivation house, etc. and fertilizing natural $CO_2$ gas by suppling directly into agricultural facilities. But this heating method causes several problem because the underground air has over 90% relative humidity and is inadequate in heating for crops. Mangos are the most widely grown tropical fruit trees and have been cultivated since 1993 in Jeju. In Jeju, the cultivating area is about 20ha and amount of harvest is 275ton/year in 2010. In this study, the heat pump system using underground air as heat source was installed in mangos greenhouse which area is $495m^2$. The capacity of heat pump system and heat storage tank was 10RT, 5ton respectively and heating effect and heating performance of the system were analysed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1438-1441
• /
• 2008

Throughout the history, the people of Iran have battled the dryness by innovations to preserve every drop of water that lands from the rare clouds, or from a stream flowing out of distant springs. Water is precious and held with highest respect, whether stored for drinking at an Ab-Anbar, or for washing and farming at the Houz in the middle of their oasis homes and orchards, or sourced at a Qanat spring or Jooy under ground. How it is that drinking water as cold as a mountain fall is found in desert of Iran? Ab-Anbar is an ancient means of water preservation and cooling through anunderground building structure. These underground structures have been present in Khorasan and other desert provinces of Iran as public or private water storage facilities, widely used before the installation of public plumbing systems in the late 1950s. Although many of these structures are still functional, most have been protected by government for restoration or viewing by the public as historical heritage. Khorasan natural dry climate and the massive surrounding deserts have been a breeding ground for many designs of Ab-Anbars. Today the existing number of such facilities stands in the province of Khorasan. Usually these structures were built in populated areas, also there are some forms of such structures on old trade routes and roadways leading to and from populated towns. This paper considers the history of Ab-Anbars in Khorasan as well as other relevant aspects such as types, components, construction methods and materials, filling and withdrawal systems.