• Journal of Ocean Engineering and Technology
• /
• v.34 no.5
• /
• pp.285-293
• /
• 2020

This study evaluated the Hook-up installation of an offshore site construction process, which is the final step in an offshore site installation process. During Hook-up installation, the offshore structure can have a detrimental effect on the work stability due to low-frequency motion. Moreover, economic costs can be incurred by the increase in available days of a tugboat. Therefore, this study developed a numerical analysis program to assess the dynamic behavior of mooring systems during hook-up installation to analyze the generally performed installation process and determine when the tugboat should be released. In this program, the behavior of an offshore structure was calculated using Cummin's time-domain motion equation, and the mooring system was calculated by Lumped mass method (LMM). In addition, a tugboat algorithm for hook-up installation was developed to apply the Hook-up procedure. The model used in the calculations was the barge type assuming FPSO (Floating production storage and off-loading) and has a taut mooring system connected to 16 mooring lines. The results of the simulation were verified by comparing with both MOSES, which is a commercial program, and a calculation method for restoring coefficient matrix, which was introduced by Patel and Lynch (1982). Finally, the offset of the structure according to the number of tugboats was calculated using the hook-up simulation, and the significant value was used to represent the calculation result.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.228-228
• /
• 2018

강변여과는 지하수 인공함양 방식 중 유도함양(induced recharge) 또는 간접함양 방식에 속한다. 이는 하천 및 강변 부근에 집수시설을 설치한 후, 미고결층 대수층(unconsolidated aquifer)의 자연 오염 저감능을 이용하여 지표수를 간접 취수하는 방식으로 수질이 불량한 지표수가 대수층을 관류하면서 희석, 화학적 이온 교환 및 반응, 흡착, 생물막(biofilm; 미생물에 의한 자연저감), 여과 등을 통하여 수질이 개선된다. 강변여과수내의 용존 농도가 높은 철과 망간은 수처리 비용증가, 용수관정 및 시설물의 수명단축을 초래한다. 따라서 강변여과 지역의 미고결 대수층에서 효과적인 철과 망간 동시 제거(vyredox)를 위해 에어서징(air surging)과 블록 서징(block surging)을 실시하기 위해서 실내 물탱크 모델(water tank model)에서 에어서징에 따른 공기 순환 우물시스템을 관찰하였으며, 이를 바탕으로 현장시험(Test bed)에 적용하였다. 미고결 대층수층에서의 철 망간은 음용수 기준치(각각 0.3 mg/L)를 초과하고 있으며, 강변여과 취수 개발 및 이용을 제한하는 요인이 되고 있다. 본 연구에서 사용된 에어서징과 블록서지 기술은 자갈층 및 미고결 대수층에 충진된 슬라임 및 폐색(clogging)을 제거함과 동시에 관정 주변의 대수층의 투수성 개선과 산화환경으로 치환되며, 대수층에 잔존하는 철/망간의 산화물들을 관정내로 빼낼 수 있는 방법이다. 따라서 서징에 따른 폐색 제거효율을 검토한 결과에서 철 망간 이온농도 저감효과와 관정 주변의 수리전도도(hydraulic conductivity) 및 저류계수(coefficient of storage)가 증가한 것으로 나타났다. 이와 같이 강변여과에 의한 폐색은 미고결층내 공기주입 및 블록서지를 통하여 철/망간 이온농도 저감 및 수리특성 개선 효과에 유용한 것으로 평가된다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.679-687
• /
• 2011

The water management of crop is different according to the area as well as climate condition and growth stage, however it is the most important and difficult problems for the farmers. The optimum irrigation manual those irrigation interval and amount of irrigation as water saving, are developed based on the lysimeter experiments carried out by the RDA for 11 years about PET (Potential Evapo-Transpiration), crop coefficient (Kc). The average PET (Potential Evapo-Transpiration) during 30 years of 45 regions for the autumn chinese cabbage cultivation was a $2.17mm\;day^{-1}$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.812-822
• /
• 2010

Water management is the most important and difficult problems in crop cultivation. The farmers are doing irrigation, those when to irrigate and how much to irrigate, depending on their experiences. The irrigation manual as water saving is possible, those irrigation interval and amount of irrigation, are developed based on the lysimeter experiments carried out by the RDA for 11 years about potential evapotranspiration, crop coefficient. The manual can be used with easy to the farmer without soil sampling and any kinds of sensors measuring soil water status.

• Journal of the Korean Society of Mechanical Technology
• /
• v.20 no.6
• /
• pp.917-923
• /
• 2018

The drinking water supply system applicable to the laying hen consists of air-water heat pumps, drinking water tanks, heat stroage tank, circulation pumps, PE pipes, nipples, and control panels. When the heat pump system has power of 7.7 to 8.7 kW per hour, the performance coefficient is between 3.1 and 3.5. The supply temperature from the heat pump to the heat stroage tank was stabilized at about $12{\pm}1^{\circ}C$, but the return temperature showed a variation of from 8 to $14^{\circ}C$. Stratified temperature in the storage tank appeared at $12.^{\circ}C$, $13.5^{\circ}C$ and $14.4^{\circ}C$, respectively. The drinking water supply temperature remained set at $15^{\circ}C$ and $25^{\circ}C$, and the conventional tap water showed a variation for $23^{\circ}C$ to $30^{\circ}C$. As chickens grow older, the amount of food intake and drinking water increased. $y=-0.0563x^2+4.7383x+8.743$, $R^2=0.98$ and the feed intake showed $y=-0.1013x^2+8.5611x$. In the future, further studies will need to figure out the cooling effect on heat stress of livestock.

• KNOM Review
• /
• v.24 no.2
• /
• pp.24-34
• /
• 2021

Service providers using edge computing provide a high level of service. As a result, devices store important information in inner storage and have become a target of the latest cyberattacks, which are more difficult to detect. Although experts use a security system such as intrusion detection systems, the existing intrusion systems have low detection accuracy. Therefore, in this paper, we proposed a machine learning model for more accurate intrusion detections of devices in edge computing. The proposed model is a hybrid model that combines a stacked sparse autoencoder (SSAE) and a convolutional neural network (CNN) to extract important feature vectors from the input data using sparsity constraints. To find the optimal model, we compared and analyzed the performance as adjusting the sparsity coefficient of SSAE. As a result, the model showed the highest accuracy as a 96.9% using the sparsity constraints. Therefore, the model showed the highest performance when model trains only important features.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.3
• /
• pp.350-355
• /
• 1986

Sixteen Korean leading barley varieties were tested on the sixtieth day after harvest, in order to investigate differences for germinative traits related, and on the eightieth day to test optimum water level for germination test. The germinative energy(GE) and capacity(GC) in the 4.5cc water level were the highest individually. Varietal variations among GE, GC, promptness index(PI) and water sensitivity(WS) were highly significant in storage conditions and water levels. Correlation coefficient estimated were positive among GE, GC, PI, but negative between these traits and WS. Also the varietal difference of WS gets higher with the following order of malting barley<naked barley<covered barley. Heritabilities of broad sense for GE, GC, PI and WS were high, therefore, these traits could be considered in malting barley breeding.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.481-488
• /
• 2006

This paper suggests a novel approach of integrating the quasi-distributed watershed model SWAT with the fully-distributed groundwater model MODFLOW. Since the SWAT model has semi distributed features, its groundwater components hardly considers distributed parameters such as hydraulic conductivity and storage coefficient. Generating a detailed representation of groundwater recharge, head distribution and pumping rate is equally difficult. To solve these problems, the method of exchanging the characteristics of the hydrologic response units (HRUs) in SWAT with cells in MODFLOW by fully combined manner is proposed. The linkage is completed by considering the interaction between the stream network and the aquifer to reflect boundary flow. This approach is provisionally applied to Gyungancheon basin in Korea. The application demonstrates a combined model which enables an interaction between saturated zones and channel reaches. This interaction plays an essential role in the runoff generation in the Gyungancheon basin. The comprehensive results show a wide applicability of the model which represents the temporal-spatial groundwater head distribution and recharge.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.2
• /
• pp.189-198
• /
• 2009

Recently the concern about the construction of underground structures such as oil and food storage caverns is increasing in Korea and abroad. The stability of those underground caverns is greatly influenced by shape factor and the size of excavation area as well as the joint conditions. In this study, therefore, the effect of the shape factor of an underground cavern on its stability was analyzed in terms of safety factor. To this end, four different shape factors of a cavern excavated in good rock conditions were investigated and sensitivity analyses were performed based on overburden, lateral earth pressure coefficient, joint spacing, properties, and orientation. The stability of a cavern is evaluated in terms of safety factor estimated numerically based on the shear strength reduction technique. In future, this study is expected to be helpful in designing and evaluating the stability of caverns excavated in discontinuous rock masses.

• Journal of Chest Surgery
• /
• v.41 no.2
• /
• pp.149-159
• /
• 2008

Background: With increasing coronary bypass and peripheral vascular surgeries, the demand for homologous vascular or synthetic conduits has continued to grow, but wide-spread application has been limited by dismal patency rates. Although cryopreserved allograft valves may provide a suitable alternative, current viability or patency of implanted allograft vascular conduits has been unsatisfactory. Material and Method: We serially analyzed the outcomes of canine femoral artery and saphenous vein allograft implants after storage in either $4^{\circ}C\;or\;-170^{\circ}C$. Result: There were no differences in graft flow rate (patency) (p=0.264), rate of thrombosis (p=0.264), presence of endothelium (p=0.587), or immunohistochemical staining for thrombomodulin (p=0.657) were detected between grafts stored in $4^{\circ}C\;and\;-170^{\circ}C$. Greater flow occurred in the arterial grafts versus the venous grafts (p=0.030), irrespective of the preservation method, with a significantly lower incidence of thrombosis (p=0.030) in arterial allografts. There was a correlation coefficient of -0.654 between thrombosis and positive immunohistochemical staining for thrombomodulin (p=0.006) and a correlation coefficient of 0.520 (p=0.0049) between the endothelial presence and positive immunohistochemical staining for thrombomodulin. The relationship between the presence of endothelium and thrombomodulin expression failed to show any correlation within the first 2 weeks (p=0.306). However, a strong correlation was seen after 1 month (p=0.0008). Conclusion: Tissue storage in either $4^{\circ}C\;or\;-170^{\circ}C$ in 10% DMSO/RPMI-1640 preservation solution preserved grafts equally well. In terms of thrombosis and graft patency, arterial grafts were superior to venous grafts. Considering the poor correlation between thrombomodulin expression and the presence of an endothelium in the implanted graft within the first two weeks, grafts in this period would not be thromboresistant.