• 한국해양공학회지
• /
• 제25권5호
• /
• pp.21-26
• /
• 2011

Seawater lift pump systems are responsible for maintaining open canal levels to provide the suction flow of circulating water pumps at the set point. The objective of this paper is to design a 2-stage mixed flow pump (for seawater lifting), investigate the new impeller modeling method, and performance improvements of the impeller by using a commercial CFD code. The rotating speed of the impeller is 1,750 rpm with a flow rate of 2,700 m3/h. A finite volume method with a structured mesh and realized k-${\varepsilon}$ turbulent model is used to guarantee a more accurate prediction of turbulent flow in the pump impeller. The performance variables such as the static head, brake horsepower, and efficiency of the mixed flow pump are compared based on changes in the impeller blade shape.

• 한국통신학회논문지
• /
• 제27권10A호
• /
• pp.1000-1010
• /
• 2002

Partial response maximum likelihood (PRML)과 fixed-delay tree search with decision feedback (FDTS/DF)은 기록 재생 시스템에서 준최적 성능을 보이는 정보열 검출 기법 (sequence detection)으로 알려져 있다. 그러나, 정보열 검출 기법 고유의 metric 연산은 심각한 하드웨어 복잡도를 유발한다. 본 논문은 정보열 검출 기법의 복잡도 문제를 극복하기 위한 대안을 제시한다. 제안된 저 복잡도 기법들은 검출 과정에서 덧셈 및 곱셈의 수를 최소화하여 고속 프로세스 및 저 복잡도 하드웨어 구현에 적합하다. 결정 궤환 드화 깁버 (decision feedback equalization; DFE)을 결합하여 ${\tau}$=2 FDTS/DF와 동일한 성능을 보이며, 기록 밀도 S>5.6에서 PR(1111)ML의 성능을 능가함이 모의 실험을 통해 보여진다.

• 한국통신학회논문지
• /
• 제37권4C호
• /
• pp.313-320
• /
• 2012

심전도의 압축은 시스템의 처리 속도를 높일 뿐만 아니라 신호의 전송량, 장기적인 기록 데이터 저장량을 줄일 수 있다. 본 논문에서는 기존의 심전도 데이터의 손실 혹은 무 손실 압축 알고리즘에 대한 성능 평가가 엔지니어의 관점에서 PRD(Percent RMS Difference)와 CR(Compression Ratio)을 측정하였다면 심전도를 진단하는 진단자의 관점에서 압축의 성능 평가에 대한 연구를 하였다. 일반적으로 심전도 데이터의 압축이 진단에 영향을 미치지 않게 하기위해서는 압축 후 복원된 PQRST파의 위치, 길이, 진폭, 파의 형태 등 진단에 필요한 것들이 손상되어선 안 된다. 대표적인 심전도 압축 알고리즘 AZTEC은 기존의 성능평가에 그 효율성이 검증되었지만 진단자의 관점에서 새로운 성능평가를 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.224-227
• /
• 1998

Linear motors are increasingly employed as direct actuators replacing the more conventional systems composed by a rotating motor and a mechanical device. Linear DC motor is useful in a high speed and high accuracy positioning system with a feedback controller. Because of these advantages, linear DC motors have already been used as motors of pen recorders and magnetic disk storage devices, these are moving coil type linear DC motors as these movers are light. Moving magnet type linear DC motor has advantages at long stroke motors because its mover's feeding wires for driving is not necessary. This paper is concerned with the analysis of linear DC motor that is moving magnet type with unipolar. In order to analyze the dynamic behaviour a mathematical model based on a simplified field analysis developed. A two dimensional finite element field solution is employed in order to illustrate the effect of yoke saturation and motor performance. It is deduced the relation between the limit value of the thrust of the linear DC motor and the dimension of the yokes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1661-1665
• /
• 2004

Hard disk drives (HDD) in computer are used extensively as data storage capacity. The trend in the computer industry to produce smaller disk drives rotating at higher speeds requires an improved understanding of fluid motion in the space between disks. Laser sheet and digital camera was used for 2-dimensional visualization of the unsteady flow between co-rotating disks in air with a cylindrical enclosure (or shroud). Geometric parameters are gap height (H) between disks, and gap distance (G) between disk tip and shroud. The lobe-structured boundary between inner region and outer region was detected by inserted particles, and the number of dominant vortices was determined clearly It is found from flow visualization that the number of vortex cells can be correlated with Reynolds number based on H which is defined as $Re_H={\Omega}RH/v$ ranging from $7.96{\times}10^2$ to $1.43{\times}10^4$, and decreases as the disk speed increases. The lobe pattern by vortex cells is changed to a circular pattern for the wide gap than narrow one.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.155-170
• /
• 1999

I think that there are few domestic enterprises that recognize standardization of logistics equipments is necessary, which causes a lot of waste in costs and also reduces their business competitiveness. The purpose of this paper is to make the companies be aware of this situation, to exactly analyze where the Korean logistics equipments status are, and further to provide practical directions of methods and activities for effective standardization. Through analysis in the study, there were some findings, as listed below. First, the standardization level of each company varies depending on its own corporate characteristics. Second, if a company adopted standardization process in logistics equipments, it would accelerate process of work efficiency or productivity. Third, when logistics equipment are standardized, it would boost efficiency in storage utilization. Fourth, the delivery services through this standardized logistics would be implemented at a higher speed than before due to the accelerated flow of materials. According to the above findings, it is confirmed that logistics standardization would greatly affect on business performance positively. For the domestic manufactures to facilitate logistics system more easily, as an easiest way, it is required to build logistics standardization teams and surveys. Then afterwards, to achieve it earlier than expected, the company-wide education and training for workers have to be followed to let them be aware of necessity and inevitability about standardized logistics.

• 한국양식학회지
• /
• 제21권1호
• /
• pp.54-59
• /
• 2008

The present study aimed to find the best diluent and cryoprotectant for sperm cryopreservation of filefish Thamnaconus modestus. Two kinds of artificial seminal plasma(ASP1, ASP2), 0.3 M glucose and marine fish Ringer's solution(MFRS) were employed as diluent. Dimethyl sulfoxide(DMSO) and methanol as cryoprotectant were selected for sperm cryopreservation. Sperm was diluted at the ratio of 1:3 with diluents containing cryoprotectants and adjusted for final concentration at 5%, 10%, 15% and 20%. Mixed milt was frozen at liquid nitrogen vapor after equilibration for 5 min. The highest motility($40.5{\pm}2.8%$) and swimming speed($81.5{\pm}4.1{\mu}m/s$) of frozen/thawed sperm were observed in ASP1 diluent containing 10% DMSO and in ASP2 containing 15% DMSO, respectively. Results showed that cryopreservation with ASP as diluent and DMSO as cryoprotectant could be adopted for long term storage of filefish sperm.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 하계학술발표회 논문집
• /
• pp.39-40
• /
• 2006

Digital image-projection and several modifications are the classical applications of Digital Micromirror Devices (DMD), however further applications in the field of optical metrology are also available. Operated with certain patterns, a DMD can function, for instance, as an array of pinholes that may substitute the Galvanic mirror or the stage scanning system presently used for 2 dimensional scanning in confocal microscopes. The various process parameters that influence the result of measurement (e.g. pinhole size, lateral scanning pitch and the number of pinholes used simultaneously, etc.) should be configured precisely for individual measurements by appropriately operating the DMD. This paper presents suitable conditions for the diffraction limited analysis between DMD-optics-CCD to achieve the best performance. Also sampling theorem that is necessary for the image acquisition by scanning system is simulated with OPTISCAN which is the simulator based on the diffraction theory.

• 한국컴퓨터정보학회논문지
• /
• 제20권11호
• /
• pp.1-8
• /
• 2015

Flash memory has advantages in that it is fast access speed, low-power, and low-price. Therefore, they are widely used in electronics industry sectors. However, the flash memory has weak points, which are the limited number of erase operations and non-in-place update problem. To overcome the limited number of erase operations, many wear leveling techniques are studied. They use many tables storing information such as erase count of blocks, hot and cold block indicators, reference count of pages, and so on. These tables occupy some space of main memory for the wear leveling techniques. Accordingly, they are not appropriate for low-power devices limited main memory. In order to resolve it, a wear leveling technique using bit array and Bit Set Threshold (BST) for flash memory. The proposing technique reduces the used space of main memory using a bit array table, which saves the history of block erase operations. To enhance accuracy of cold block information, we use BST, which is calculated by using the number of invalid pages of the blocks in a one-to-many mode, where one bit is related to many blocks. The performance results illustrate that the proposed wear leveling technique improve life time of flash memory to about 6%, compared with previous wear leveling techniques using a bit array table in our experiment.

• 융합보안논문지
• /
• 제7권4호
• /
• pp.29-34
• /
• 2007

본 논문에서는 CB 트라이의 단점을 보완한 RCB 트라이를 제안한다. 먼저 CB 트라이의 경우 처음으로 축약된 구조를 시도하였으나 데이터의 양이 증가함에 따라 트리의 균형을 맞추기 위해 사용되는 더미노드들로 인해 삽입에 상당한 어려움을 가지고 있다. 반면 계층적으로 표현한 HCB 트라이는 map이 오른쪽으로 증가하는 것을 막기 위해 일정 깊이를 주어 깊이에 다다르면 새로운 트리를 만들어 연결시키는 방법을 이용하였다. 결과적으로 입력과 검색 속도를 상당히 빠르게 진전시킬 수 있었으나 CB 트라이와 마찬가지로 더미노드를 사용하고 여러 트리의 링크를 사용하기 때문에 저장공간이 커지는 단점을 안고 있다. 본 논문에서 제안한 RCB 트라이는 더미노드를 완전히 없애 성능이 60% 향상되었다.