• Geomechanics and Engineering
• /
• 제16권5호
• /
• pp.503-512
• /
• 2018

Globally there is an increasing need to reduce the greenhouse gas emissions and increase the use of renewable sources of energy. The storage of solar thermal energy is a crucial aspect for implementing the solar energy for space heating in high latitudes, where solar insolation is high in summer and almost negligible in winter when the domestic heating demand is high. To use the solar heating during winter thermal energy storage is required. In this paper, equations representing the single U-tube heat exchanger are implemented in weak form edge elements in COMSOL Multiphysics(R) to speed up the calculation process for modelling of a borehole storage layout. Multiple borehole seasonal solar thermal energy storage scenarios are successfully simulated. After 5 years of operation, the most efficient simulated borehole pattern containing 168 borehole heat exchangers recovers 69% of the stored seasonal thermal energy and provides 971 MWh of thermal energy for heating in winter.

• 한국식품저장유통학회지
• /
• 제31권1호
• /
• pp.46-63
• /
• 2024

This study evaluated the impact of storage temperature on the quality characteristics of texturized vegetable protein (TVP). TVP was prepared by mixing defatted Daewon soybean flour at 80℃, gluten, and corn starch in a 5:3:2 ratio, which was then extruded at a screw speed of 250 rpm and a barrel temperature of 190℃ with moisture addition at 9 rpm. Subsequently, the extruded TVP was vacuum-sealed in polyethylene packaging and stored at -20℃, 0℃, and 4℃ for 9 days. Texture analysis revealed that the curing rate followed 4℃ > 0℃ > -20℃ sequence. No significant color variation was observed across the storage conditions, although water content increased at all temperatures. Notable changes were detected in moisture absorption capacity (%) and solid leaching (%), following the order of -20℃ > 0℃ > 4℃. The turbidity of the solution released during cooking varied, with the highest to the lowest sequence being -20℃ > 4℃ > 0℃, while pH levels remained neutral. Regarding free amino acids, sweetness and textural quality improved with storage across all temperatures, whereas bitterness components diminished at 4℃. The study suggests that refrigerated storage at 4℃ is a viable method for distributing TVP, which was previously distributed only in a frozen and dry state.

• 한국정보통신학회논문지
• /
• 제23권11호
• /
• pp.1330-1336
• /
• 2019

4차 혁명시대가 시작됨에 따라 다양한 장비들이 클라우드 기반으로 동작하고 있다. 이와 기기들은 다양한 형태의 데이터 또는 대용량의 멀티미디어 데이터를 계속 생성하고 있다. 이런 상황을 처리하기 위해서는 대용량의 저장장치가 필요하며 또한 저장된 데이터를 처리하고 정확한 정보를 얻기 위해서 빅데이터 기술이 필요하다. 일반적으로 네트워크 환경에서 대용량의 저장장치를 구축하기 위해서는 SAN 또는 NAS 기술이 사용된다. 본 논문에서는 DAS(Direct Attached Storage)의 확장기술인 Network-DAS를 사용하여 대용량 저장장치를 구성하는 방안을 제시한다. 논문에서 제시하는 스토리지 시스템의 확장성과 성능을 검증하기 위해 76개의 하드 디스크를 이용하여 벤치마크 실험을 수행하였다. 실험 결과 제안하는 고성능 대용량 스토리지 시스템의 확장성과 신뢰성을 검증하였다.

• 대한전자공학회논문지SD
• /
• 제46권8호
• /
• pp.18-21
• /
• 2009

ROM은 디지털 시스템에서 전력 소모가 크고 속도의 병목현상을 갖는 블록이다. 점증적인 시스템의 고속화에 따라 ROM 설계시 전력소모 감소와 동작 속도 향상이 요구 된다 FFT 및 FIR 필터에 적용되는 ROM은 주소를 순차적으로 접근하는 방식의 ROM이 필요하며, 본 논문에서는 순차적으로 주소를 접근하는 ROM을 설계할 때 기존의 ROM과 같은 값을 출력 하면서 저장되는 셀을 줄일 수 있는 방법을 제안하였다 이러한 방법을 이용하면 비트라인에 연결된 저장 셀 개수가 감소되며 따라서 비트라인의 커패시턴스 값이 감소된다 비트라인의 커패시턴스 값이 감소하면서 지연시간 및 파워가 감소한다. 논문에서 예제로 사용한 Fill 계수 저장용 ROM의 경우 제안한 알고리즘을 적용하였을 때 저장 셀 '1'이 최대 86.3% 감소함을 알 수 있다.

• 천문학논총
• /
• 제19권1호
• /
• pp.83-92
• /
• 2004

In this paper, we introduce the development of the large storage system in order to record the observed space radio signal in the Korean VLBI Network(KVN) with high-speed. The KVN is the Very Long Baseline Interferometery(VLBI) to observe the birth of star, the structure of space by constructing radio telescope with diameter 21m at the Seoul, Ulsan, Jeju from 2001 to 2007 years. To do this, Korea Astronomy Observatory joined the international consortium for developing the high-speed large storage system(Mark 5), which is developed by MIT Haystack observatory. The Mark 5 system based on hard disk has to record up to 1 Gbps the observed space radio signal. The main features of Mark 5 system are as follows; First it is able to directly record the input data to the hard disk without PC1(Peripheral Component Interconnect) internal bus, and the second, it has two hard disk banks, which are able to hot-swap ATA/IDE type very cheap up to 1 Gbps recording and playback. The third is that it follows the international VLBI standard interface hardware(VSI-H). Therefore it can be connect directly the VSI-H type system at the input/output. Finally it also supports e- VLBI(Electronic-VLBI) through the standard Gigabits Ethernet connection.

• 한국정보처리학회논문지
• /
• 제4권5호
• /
• pp.1172-1181
• /
• 1997

멀티미디어 데이터는 텍스트 형식의 정형 데이터와 영상이나 음성 등의 비정형 데이터가 혼재한 형테의 데이터이다. 멀티미디어 데이터는 대용량의 특성과 큰 전송 대역폭의 요구 및 실시간 처리 등을 그 특성으로 한다. 이러한 멀티미디어 데이터의특성 때문에 VOD서버나 연속 매체 저장 서버(Continuous media storage server)는 여러 개 의 디스트를 배열의 구조로 하는 디스크 스트라이프 구조나 디스크 배열((RAID) 구조를 하고 있다.디스트의 병렬 접근 시스템에서 세그먼트 인터리빙 방식으로 저정된 연속 매체를 고속 재생하는 경우, 특정 디스크에 부하의 편중 현상을 유발하여 다른 서비스의 질을 보장하지 못하는 경우가 발생한다. 디스크 부하의 편중은 연속 매체의 고속 재싱의 배속과 시스템이 보유하는 디스크의 수에 따라 부하 편중 정도를 달리 한다.본 논문은 디스크의 수와 연속 매체의 고속 재생의 정도와 관계없이 세그먼트의 접근 간격을 변화 함으로써 디스크의 부하 편중을 감소시키는 고속 재생 기법을 제안한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.351-354
• /
• 2004

This thesis presents Bipolar transistor with SAVEN(Self-Aligned VErtical Nitride) structure as a high-speed device which is essential for high-speed system such as optical storage system or mobile communication system, and proposes 0.8${\mu}m$ BiCMOS Process which integrates LDD nMOS, LDD pMOS and SAVEN bipolar transistor into one-chip. The SPICE parameters of LDD nMOS, LDD pMOS and SAVEN Bipolar transistor are extracted, and comparator operating at 500MHz sampling frequency is designed with them. The small Parasitic capacitances of SAVEN bipolar transistor have a direct effect on decreasing recovery time and regeneration time, which is helpful to improve the speed of the comparator. Therefore the SAVEN bipolar transistor with high cutoff frequency is expected to be used in high-speed system.

• 한국철도학회논문집
• /
• 제3권4호
• /
• pp.229-236
• /
• 2000

In this study, the unsteady flow field induced by a high-speed train passing through a tunnel is numerically simulated by using an axi-symmetric Euler Equation. The modified patched grid scheme applied to a structured grid system was used to handle the relative motion of a train. The hybrid-dimensional approach which mixed 1D and axi-symmetric dimension was used to reduce the computation time and memory storage. By employing the hybrid-dimensional approach, a long tunnel as much as 5 km was able to be simulated efficiently. The results show that the maximum pressure rise in the tunnel by the entrance of the train is a function of both train speed and train-tunnel cross-sectional area ratio. The unsteady pressure fluctuation in the tunnel and around the train was also investigated in the real condition; Korean high-speed train on the Seoul-Pusan line.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.824-828
• /
• 2007

With increasing interest in the reduction of cost for operation and maintenance of overhead catenary system, various methods of condition monitoring have been developed and used in with high-speed analysis and advanced image processing techniques. This study utilizes a high-speed camera as inspecting system to measure the wear, stagger, hight and arc extinguishing test of overhead catenary system. All measuring image were captured by a high speed CMOS camera with PCI express output, which can acquire up to 1000 frames per second with the resolution 1024 × 1280 pixels. Line type laser source with a power equal to 300 mW and the National Instrument LabVIEW (8.0) based on vision acquisition software have been used in application programming interface for image acquisition, display, and storage. The proposed high-speed camera system is finally applied to measure the overhead catenary system showing promising on-field applications

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.939-941
• /
• 2003

High Speed permanent magnet machines are currently being developed for a number of applications including gas turbine power plants, air conditioning systems, machine tools, gas pumps, high performance vacuum pumps, flywheel energy storage systems, aircraft fuel pumps, and so on. Using a high-speed machine eliminates the necessity of the mechanical gearbox and could certainly increase the system efficiency and reduce the total cost. In addition, a high-speed machine has the advantage of small dimension and low weight, i.e. low weight to power and volume to power ratio. This paper presents a review of some important applications (mostly still under development) where high-speed machines arc used, highlighting the advantages of the technology in each case.