• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2288-2297
• /
• 2023

Current designs of both large reactor units and small modular reactors utilize a nuclear fuel with increasing enrichment. This increasing demand for better nuclear fuel utilization is a challenge for nuclear fuel handling facilities. The operation with higher enriched fuels leads to reduced reserves to legislative and safety criticality limits of spent fuel transport, storage and final disposal facilities. Design changes in these facilities are restricted due to a boron content in steel and aluminum alloys that are limited by rolling, extrusion, welding and other manufacturing processes. One possible solution for spent fuel pools and casks is the burnup credit method that allows decreasing very high safety margins associated with the fresh fuel assumption in spent fuel facilities. This solution can be supplemented or replaced by an alternative solution based on placing the neutron absorber material directly into the fuel assembly, where its efficiency is higher than between fuel assemblies. A neutron absorber permanently fixed in guide tubes decreases system reactivity more efficiently than absorber sheets between the fuel assemblies. The paper summarizes possibilities of fixed neutron absorbers for various nuclear fuel and fuel handling facilities. Moreover, an absorber material was optimized to propose alternative options to boron. Multiple effective absorbers that do not require steel or aluminum alloy compatibility are discussed because fixed absorbers are placed inside zirconium or steel cladding.

• The Korean Journal of Malacology
• /
• v.24 no.1
• /
• pp.51-57
• /
• 2008

With the purpose to estimate the possibility of short-term storage and cryopreservation for sperm of Charonia sauliae, which is a potential preparation for its artificial reproduction and further research, in this study, protocols for short-term storage and cryopreservation of trumpet shell sperm was optimized. The effects of different immobilizing solutions, dilution ratios were estimated for short-term storage. And the effects of different cryoprotectant extenders and freezing rates were estimated for cryopreservation in terms of motility and survival of sperm. The results indicated that the artificial sea water of 350 mOsmol/kg is a better immobilizing solution and sperm which was diluted at a ratio of 1:1 (v/v) had higher motility and survival rate during short-term storage. The effect of 5% dimethyl sulfoxide was significantly better than those of other cryoprotectant extenders. And a freezing rate of $-20^{\circ}C\;min^{-1}$ showed better effect than other freezing rates. In conclusion, this study optimized some key factors of the short-term and cryopreservation of C. sauliae sperm, which can provide valuable data for germ-plasm conservation and artificial propagation of C. sauliae.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.4
• /
• pp.239-244
• /
• 2005

The effects of diluents composition on cold storage for olive flounder (Paralichthys olivaceus) sperm were examined in terms of the swimming speed of sperm, the percentage of mobile sperm, and fertilization rates. The following results indicated that cold storage methods with fresh conditions could be employed in olive flounder milt preservation. The preserved sperm of olive flounder that was diluted I: 10 with artificial seminal plasma II (ASP II) and Stein's solution (SS) at $0^{\circ}C$ remained motile for 30 days. The most effective condition for cold storage was ASP II and SS at 0 $0^{\circ}C$ for the sperm, although there is no significant difference statistically. No difference in the fertilization rate was found between fresh sperm and the preserved ones with ASP I, II and SS at 10 days post-storage.

• Food Science of Animal Resources
• /
• v.42 no.3
• /
• pp.467-485
• /
• 2022

Supercooling storage refers to lowering the product temperature below its freezing point without phase transition and has the potential to extend shelf life. Nevertheless, supercooled objects are in a thermodynamically unstable state, and nucleation can occur spontaneously. To achieve supercooling storage, slow cooling and insulation are essential. Hence, a stepwise algorithm for the supercooling storage of pork loins was designed and validated in this study. Pork loins were stored at 3℃, -18℃, and -3℃ (freezing), and supercooled for 16 days. All samples remained in a supercooled state and were unfrozen at the end of storage. Supercooled pork loins were superior in terms of drip loss, cooking loss, and water-holding capacity compared to frozen samples. Additionally, supercooling treatment prevented discoloration, increase of volatile basic nitrogen, and microbial growth. Thus, supercooling of pork loin was achieved using a stepwise program and was effective to maintain meat quality.

• Food Science and Preservation
• /
• v.31 no.1
• /
• pp.46-63
• /
• 2024

This study evaluated the impact of storage temperature on the quality characteristics of texturized vegetable protein (TVP). TVP was prepared by mixing defatted Daewon soybean flour at 80℃, gluten, and corn starch in a 5:3:2 ratio, which was then extruded at a screw speed of 250 rpm and a barrel temperature of 190℃ with moisture addition at 9 rpm. Subsequently, the extruded TVP was vacuum-sealed in polyethylene packaging and stored at -20℃, 0℃, and 4℃ for 9 days. Texture analysis revealed that the curing rate followed 4℃ > 0℃ > -20℃ sequence. No significant color variation was observed across the storage conditions, although water content increased at all temperatures. Notable changes were detected in moisture absorption capacity (%) and solid leaching (%), following the order of -20℃ > 0℃ > 4℃. The turbidity of the solution released during cooking varied, with the highest to the lowest sequence being -20℃ > 4℃ > 0℃, while pH levels remained neutral. Regarding free amino acids, sweetness and textural quality improved with storage across all temperatures, whereas bitterness components diminished at 4℃. The study suggests that refrigerated storage at 4℃ is a viable method for distributing TVP, which was previously distributed only in a frozen and dry state.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.824-827
• /
• 1994

Sardine oil was vacuum-steam deodorized at $170^{\circ}C$ with acid (acetic and citric acid) and ethanol solution as steam sources. Glycerol was added to fish oil to remove volatile odorous constituents. The storage stability of deodorized fish oil was determined by totox value, secondary parameter obtained from peroxide and anisidine values. Both deodorization with acetic acid solution and addition of glycerol to the oil resulted in improved storage stability. The totox values of fish oil deodorized with water, glycerol+water and glycerol+acetic acid solution were 936, 611, and 443, respectively after 10 days at $30^{\circ}C$. The result showed that acetic acid seemed to destroy the odorous constituents and glycerol accelerated the removal of odorous constituents, such as amines in fish oil.

• Journal of Environmental Health Sciences
• /
• v.29 no.2
• /
• pp.69-76
• /
• 2003

Hexavalent chromium may reduce on polyvinyl chloride (PVC) filter during sampling and storage of sample. Recently, new or modified filters for preventing Cr(VI) from the reduction has been introduced. Thus, this study was performed to compare the reduction behaviors of Cr(VI) on several sampling filters and to find the most appropriate filter for airborne Cr(VI) sampling in plating operation. The results were as follows. 1. There were statistically significant differences among PVC, polytetrafluoroethylene (PTFE). glass fiber (GF) and polyvinylidene fluoride (PVDF) filters in recovery rates of spiked Cr(VI) samples by storage time(p<0.05). There was no significant difference between PVC and PTFE filters(p>0.05). The PVC and PTFE filters showed higher recoveries than GF and PVDF filters(p<0.05). 2. The quartz fiber(QF) filter treated with an alkali solution(2% NaOH/3% Na$_2$CO$_3$, 1% NaOH) showed a significantly higher recovery of Cr(VI) by storage time than other filters(GF and QF filter)(p<0.05). There was no difference in recovery of Cr(VI) between alkali-treated and untreated GF it filters(p>0.05). But the QF filters treated with two alkali solution showed a significantly higher recovery than the untreated QF filter(p<0.05). There was no significant difference in recovery of Cr(VI) between QF filters treated with 1% NaOH and 2% NaOH/3% Na$_2$CO$_3$(p>0.05). In conclusion, treatment of QF fillers with alkali solution was most effective in protecting from the reduction of Cr(VI).

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.3
• /
• pp.174-178
• /
• 2008

This study was carried out to investigate the effect $GA_3$, moist chilling storage and priming treatments on seed germination of Caltha palustris var. membranacea. Percent germination was greatly improved by $GA_3$ treatment. However, no significant differences were observed among concentrations and soaking periods of $GA_3$. Optimum $GA_3$ treatment was one hour presoaking in a 100mg${\cdot}L^{-1}$ solution. Germination enhancing effect of moist chilling stroage was significantly greater than that of $GA_3$. Chilling treatment for five weeks resulted in the greatest percent germination of 60.3%. Unlike the role of $GA_3$ and moist chilling storage, no appreciable effect on seed germination was observed by the priming the seeds with either a $Ca(NO_3)_2 $ or $KNO_3$ solution.

• Reproductive and Developmental Biology
• /
• v.34 no.3
• /
• pp.241-246
• /
• 2010

The objective of this study was to investigate the effect of storage time on fresh boar semen in Androhep and Beltsville Thawing Solution (BTS). Boar semen samples extended in each extender were stored at $17^{\circ}C$ up to 4 days. Sperm motility kinematics was evaluated by computer assisted sperm analyzer (CASA) and capacitation status by chlortetracycline (CTC)/Hoechst 33258 staining. Sperm motility (%) was not decreased during storage in BTS and Androhep. No significant difference between extenders was observed. Only significant differences in kinematic parameters on linearity during storage were found. The percentage of dead sperm significantly decreased during storage (p<0.05). Also the percentage of noncapacitated, capacitated, and acrosome-reacted sperm significantly modified during storage (p<0.05). However, there was no significant difference between extenders except proportion of capacitated sperm. This finding supported that modification in these parameters was not significantly different between extenders during this short-term storage. Our finding strongly indicated that both Androhep and BIS maintained favorable conditions for motility, motility kinematics, and capacitation status during short-term storage. Despite modifications in some parameters were apparent during sperm storage in extenders, these may not affect the fertilizing capacity of boar semen.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.1
• /
• pp.7-14
• /
• 2016

This study explores the feasibility of a cold storage system to provide thermal comfort for idle stop and go (ISG) vehicles. ISG function is the most valuable and environmental friendly technology in the current automobile industry. However, when an ISG vehicle stops, meaning when the engine standstill, the air-conditioning system does not work, because the compressor also stops. Therefore, passenger thermal comfort is not maintained, as cold air is not provided in the cabin. Consequently, many automakers have studied electric air-conditioning systems based on electrically-driven compressors or cold storage systems using phase-change materials. The experiments herein were conducted for the feasibility testing of different types of cold storage heat-exchangers, cold storage mediums, and thermo-expansion valves with current air-conditioners. The auxiliary cold storage system, filled with phase-change materials, was located behind the evaporator and almost stacked on top of it. In the experimental results, the air discharge temperature rate of increase was better than the conventional air-conditioning system when the compressor stopped and thermal comfort was maintained with $1.9{\sim}4.3^{\circ}C$ decreases within 60 seconds. The #1 cold storage heat-exchanger (CSH), #2 thermo-expansion valve (TXV) and #2 phase change material (PCM) were chosen because of the best temperature rise delay. It was concluded that a cold storage system is an effective solution for ISG vehicles to maintain thermal comfort during short engine stops.