• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.421-430
• /
• 2014

The greenhouse gas emission generated by idling vehicles is a critical issue in the greenhouse gas reduction from the transportation sector. Recently, the mandatory application of the Idle Stop and Go (ISG) for buses, trucks and taxis is in the process of legislation. Focusing on the regulation is about to apply to passenger cars, this study analyzed the quantitative economic effects of the ISG installation by passenger car types in Seoul metropolitan area to support proper policy making. The benefit cost ratio of ISG installation on commercial passenger car of Seoul is the most effective, calculated as 8.55. Accordingly, the amount of 660 liters (per year per vehicle) of fuel and 1,606 kg (per year per vehicle) of $CO_2$ could be reduced. The results of this study might be used as an index for judgment of policy such as determining appropriate subsidy for ISG installation on passenger cars.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.1
• /
• pp.61-67
• /
• 2018

Automatic Train Stop (ATS) is a device that automatically stops or decelerates a train when the train exceeds the permitted speed limits or violates the signal regulations. The railway signaling system has been evolved to an automatic train control system (ATC), and is being developed into Distance-to-Go and Communication Based on Train Control (CBTC). In spite of that, the ATS system is currently being operated in Seoul Metro (line 1 and 2) and most of railway lines in Korea as well as overseas. In this study, we presents the technical methodology to prevent human errors in order to secure the safety in operation of the ATS system.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.3
• /
• pp.135-140
• /
• 2017

SMT is an equipment that picks up electronic components and does precise placing onto PCBs. In order to do this, it stops in front of a camera installed in the middle to go over vision inspection. And after that it is move for placing. In this paper, We compared to the method of the placing after inspect to the stoped component and the moving component in front of the camera. As a result, This paper shows that the time efficiency of the fly-motion was increased by 9 percent than the stop-motion.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1601-1606
• /
• 2005

In this study, an automatic idle stop control system was developed, which automatically stops the idle state engine as it detects the stop state of the car for several seconds and restarts the stopped engine with the driver's electrical signal. It is composed of microprocessor and the related electronic circuits and communicates with ECU and TCU. With accurate and confirmed operating performance, the control system was equipped in the test car which was proceeded the ECE15+EUDC mode test. It is confirmed that the control system, ASG has much favourable effects on reducing the fuel consumption and harmful exhaust emissions.

• Journal of Korean Society of Transportation
• /
• v.24 no.1 s.87
• /
• pp.97-108
• /
• 2006

At present, Korean many cities depend on subjective judgements of experts to estimate the number of bus-stops and inter-stop space. To get reliable results by using more objective procedure, we search for old studies and models, but they don't concern alighting demands and a random demand distributions. Our study recognize and overcome these limitation. We devide the demand into boarding and alighting demands, and define the model that can estimate flexibly optimal number of bus-stop and inter-stop space on each segment by the demand distribution. Also we apply this new model to a simple example route having various demand distributions As a result, the number of bus-stop on each segment can be estimate flexibly in proportion to boarding or alighting demand by using this model.

• International Journal of Contents
• /
• v.14 no.2
• /
• pp.24-29
• /
• 2018

In this paper, we propose an efficient traffic light detection (TLD) method as an advanced driver assistance system (ADAS) for elderly drivers. Since an increase in traffic accidents is associated with the aging population and an increase in elderly drivers causes a serious social problem, the provision of ADAS for older drivers via TLD is becoming a necessary(Ed: verify word choice: necessary?) public service. Therefore, we propose an economical TLD method that can be implemented with a simple black box (built in camera) and a smartphone in the near future. The system utilizes a color pre-processing method to differentiate between the stop and go signals. A mathematical morphology algorithm is used to further enhance the traffic light detection and a circular Hough transform is utilized to detect the traffic light correctly. From the simulation results of the computer vision and image processing based on a proposed algorithm on Matlab, we found that the proposed TLD method can detect the stop and go signals from the traffic lights not only in daytime, but also at night. In the future, it will be possible to reduce the traffic accident rate by recognizing the traffic signal and informing the elderly of how to drive by voice.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.4
• /
• pp.122-131
• /
• 2017

This study was a drone-utilized case study motivated by that drones can obtain sophisticated video image data previously not feasible. The dilemma zones on selected intersection approaches were identified and locations of drivers' decision making to stop or go at the onset of yellow were determined by analyzing drone video images. The gap between the drivers' decision making location and invisible stop/go border line provided by the yellow time interval was defined as "risky passing zone". To improve the dilemma zone safety problems, re-optimization of yellow time intervals and introduction of new pavement marking that can help drivers decision making on yellow indication are suggested.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.5
• /
• pp.223-228
• /
• 2017

SMT is an device that picks up electronic components and does precise placing onto PCBs. In order to do this, it stops in front of a camera installed in the middle to go over vision inspection. And after that it is move for placing. There are 16 different types of routes in this process. This paper compared to the moving time of three methods in the (sLa-Camera-pLa)type. The first method is stopping in front of the camera for vision inspection and placing components onto PCBs(stop-motion). The second method is moving in front of the camera for vision inspection without stopping(fly1-motion). The third method is inspecting the components when the speed of the X axis, the Y axis is the best and is placing components onto PCBs(fly2-motion). This paper shows the moving time of three methods is same. Therefore we proved that the stop-motion method can be placing in the fastest time without changing structure of the device in the (sLa-Camera-pLa)type.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.61-62
• /
• 2013

최근 EV(Electric Vehicle), PHEV(Plug-in Hybrid Electric Vehicle), HEV(Hybrid Electric Vehicle) 등 친환경 차량의 개발 및 출시가 진행되고 있고 이들 친환경 차량의 궁극적 목적은 엔진과 배터리 혹은 배터리 단독 사용에 의한 고연비, 배기가스 배출 저감 등을 목적으로 하고 있다. 하지만 기존 내연기관 차량과 비교시 차량가격이 높게 형성되어 시장 활성화는 다소 시간이 소요될 것으로 판단된다. 이러한 친환경 차량 기술은 신차에만 국한되어 적용되고 있고 현재 도로상에서 운행중인 대부분의 차량은 기존의 저연비, 다량의 배기가스 배출문제를 여전히 내포하고 있는 실정이다. 이에 대한 대안으로 기존의 차량 보조배터리에 지능형 배터리 센서(IBS, Intelligent Battery Sensor)를 장착하고 이를 통해 ISG(Idle Stop&Go)을 수행하는 Mild HEV 형태의 차량이 개발되고 있다.

• Journal of Korean Society of Transportation
• /
• v.25 no.3
• /
• pp.145-154
• /
• 2007

Determining stop spacing is a very important process in transit system planning. This study is involved in an analytical approach to decide the transit stop spacing. Transit stop spacing should be longer as 1) user access speed, 2) user travel time, and 3) dwell time increase, and shorter as 1) passengers (boardings and alightings) and 2) headway increase. In this study, a methodology is proposed to determine transit stop spacing to minimize total cost (user cost plus operator cost) with irregular passenger distribution (boardings and alightings) Without considering in-vehicle passengers, the transit stop spacing should be shorter in the concentrated sections of the passenger distribution than in others to minimize total cost. Through the conceptual analysis, it is verified that the transit stop spacing could be longer as the in-vehicle passengers increase in certain sections. This study proposes a simple practical method to determine transit stop spacing and locations instead of a dynamic programming method which generally includes a complex and difficult calculation. If the space axis is changed to a time axis. the methodology of this study could be expanded to analyze a solution for the transit service (or headway) schedule problem.