• 전력전자학회논문지
• /
• 제22권3호
• /
• pp.223-230
• /
• 2017

A low-cost BLDC motor with hall sensor is used to drive the position control of a facility security monitoring system in this paper. Low measurable frequency of the hall sensor signal in low-speed regions results in difficulty in obtaining accurate speed detection and position control. To improve system control performance, we propose a variable gain of position controller and stop mode control scheme according to the motor speed and error position with pre-set deceleration time. The proposed stop mode control scheme is activated around the stop position to forcibly move the BLDC motor to the stop position in low speed. In the proposed stop mode, the motor current is controlled by the actual speed with the reference rotating angle. The control performance of the proposed position control is verified through experiments at the actual rail guided facility security monitoring system.

• 전력전자학회논문지
• /
• 제24권6호
• /
• pp.389-395
• /
• 2019

This paper presents the sensorless position control of an auxiliary scaffolding step system for vehicles using DC motors. The designed auxiliary scaffolding step has a mechanical protector at the stop position. At this position, the scaffolding is forcibly stopped by the mechanical protector, and the motor current is dramatically increased to the stall current of the DC motor, thereby increasing the electrical damage. In this study, the estimated back EMF- and current model-based observers are proposed to estimate the motor speed and stop position. A simple V/F acceleration voltage pattern is used to operate the auxiliary scaffolding system. The estimated moving position is adopted to determine the stop position of the DC motor with the load current state. The operating current of the DC motor can be reduced by the estimated moving position and V/F acceleration pattern. At the stop position, the proposed sensorless position controller can smoothly stop the DC motor with the estimated moving position and reduced load current without any mechanical and electrical stress from the stall current from the mechanical protector. The proposed control scheme is verified by the comparison of simulations and experiments.

• 한국정밀공학회지
• /
• 제11권5호
• /
• pp.143-152
• /
• 1994

The velocity trajectory profile of trolley is designed to minimize both swinging while transportation of load and the stop position error at the final stop position. This profile is designed to be automatically programmed by the digital control algorithm when the length of chain and the desired travel distance are given as a priori. Also, to minimize both swinging and the stop position error the anti-swing controller which improves poor damping characteristics of the crane and the stop position controller are employed. The experimentalresults of sequential adaptation of the velocity trajectory profile and these two controllers show that this control scheme has excellent control performance as compared with that of the uncontrolled crane system.

• 한국산학기술학회논문지
• /
• 제22권6호
• /
• pp.591-598
• /
• 2021

도시철도 열차의 요구 사항 중 하나가 정위치 정차 성능이다. 이는 열차가 승강장의 지정된 위치에 정확히 정차할 수 있도록 하는 것이며 정위치 정차를 만족시키지 못할 경우 스크린도어와의 간섭이 발생하여 승객 불편 및 운행 지연을 초래한다. 자동운전 열차의 경우 열차의 현재 속도 정보를 가지고 현재의 위치를 파악한 후 이에 맞게 가감속 명령을 내려 제어를 수행하므로 속도 정보의 오차가 클 경우 정확한 제어가 불가능하게 된다. 도시철도에서는 위치 오차를 보정하기 위해 PSM(Precision Stop Marker)가 있어 특정 지점에서 위치 오차를 보정하여 정차제어의 오차를 줄이도록 한다. 그러나 PSM 자체는 위치정보만 가지고 있으므로 속도 오차에 대한 보정은 수행하지 않는다. 본 논문에서는 PSM 경과 정보를 가지고 속도를 추정하여 정위치 정차제어를 수행하는 방안에 대하여 제안한다. 등감속도로 열차를 운행하면 속도를 추정할 수 있고 이에 따라 목표 감속도를 구하여 정차제어를 수행할 수 있다. 수치적 시뮬레이션을 통해 제안한 방안의 실현 가능성과 우수성을 보인다.

• 자동차안전학회지
• /
• 제14권4호
• /
• pp.35-42
• /
• 2022

This paper presents a stochastic model predictive control (SMPC) for stop maneuver of autonomous vehicles considering perception uncertainty of stopped vehicle. The vehicle longitudinal motion should achieve both driving comfortability and safety. The comfortable stop maneuver can be performed by mimicking acceleration profile of human driving pattern. In order to implement human-like stop motion, we propose a reference safe inter-distance and velocity model for the longitudinal control system. The SMPC is used to track the reference model which contains the position uncertainty of preceding vehicle as a chance constraint. We conduct simulation studies of deceleration scenarios against stopped vehicle in urban environment. The test results show that proposed SMPC can execute comfortable stop maneuver and guarantee safety simultaneously.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.292-297
• /
• 1990

An anti-swing controller for an overhead crane in the stop position is designed. The developed anti-swing controller improves on the poor damping characteristics of overhead crane by feeding back the crane acceleration as a function of swing angular speed. The experimental results show that this crane using the proposed controller yields small stop position error and rapid damping response characteristics.

• 대한교통학회지
• /
• 제18권3호
• /
• pp.29-39
• /
• 2000

본 논문은 교차로 좌회전 궤적에 따른 정지선의 위치결정에 관한 연구로서 현행 교차로를 설계하는데 있어 좌회전 차량의 운행특성을 고려하지 못하는 불합리한 점을 지적하고, 좌회전 궤적을 고려한 차량정지선의 위치를 결정하는 기준을 제시하는데 그 목적이 있다. 면적이 한정되어 있는 교차로상에서 좌회전궤적을 고려하여 이를 수용하려면 정지선의 형태가 일자형이 아닌 계단형의 모양을 보이게 되는데, 이때 후퇴하게 되는 정지선의 길이를 산정함에 있어 차종을 3가지로 분류하였고 그에 따른 설치곡선반경을 12m, 15m, 23m로 제시하였다. 그리고 교차로 연석선상을 기준으로 개별 차로의 폭 차로수의 조합을 고려하였다. 따라서 본 논문은 후퇴되는 차량정지선의 길이뿐 아니라 곡선반경의 설치방법을 제시함으로서 설계된 곡선반경을 노면상에 표시하는데 도움이 될 것이다. 좌회전 궤적의 영향에 대한 연구는 교통류율과 안전성에 관계되는 것으로 불합리하게 설계된 좌회전 이동류에 대한 곡선반경은 좌회전 용량감소의 원인으로 작용할 뿐만 아니라 운전자로 하여금 죄회전시에 불안정함을 느리게 하여 인근차로를 침범하게 되는 상충발생을 증가시키게 된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1601-1602
• /
• 2007

Steam stop valves of steam turbine in the power plant are at their 100% position and have no movements. Steam control valves, ie governor valves have no movements either at their controlling position on load limit operation. By the way, if there were no change of operation state, steam valves could be sticked mechanically. Because the governor could fail in protecting and controlling steam turbine in case of emergency conditions, the closing test of 100% valve travel must be accomplished periodically for the purpose of testimony of their good conditions. And, As the difference between steam turbine structures exists according to the manufacturer or generation capacity, both steam stop valves and steam control valves differes in structure and operation method. Therefore, it is essential for not only turbine protection but also control for the control engineers to find out composition of steam valves and method of closing test.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.260-265
• /
• 1989

The micro-computer based automatic control of the overhead crane system is designed. Two control methodologies were suggested; the one is the anti-swing controller which improves poor damping characteristics of the crane and the other is the stop-position controller which minimizes the transportation position error. The input speed profile is automatically determined by the pre-programmed digital control algorithm. The experimental results show that these proposed controllers have excellent control performance as compared with those of the uncontrolled crane system.

• 제어로봇시스템학회논문지
• /
• 제10권4호
• /
• pp.317-324
• /
• 2004

The ink jet printer media advance system is required to be exactly driven to the target position via tracking the reference velocity profile to obtain the high quality print image. A single gain PID controller is not sufficient to fulfill the control objectives, the exact velocity tracking and the accurate positioning, at the same time. A dual PID controller and its switching strategy are presented in this paper to achieve the control objectives. The media advance system is controlled by two separate PID controllers, one of which is for velocity control, and the other is for position control. A PID controller controls the velocity of the media advance system until it reaches the predetermined switching position. When the media advance system passes the predetermined position, the controller is switched to the other PID controller which is more profitable for exact positioning. The switching position is determined by the estimated stop distance. The simulation and experimental results are presented to show the validity and effectiveness of the proposed controller.