• Journal of the Korea Institute of Building Construction
• /
• v.14 no.3
• /
• pp.237-243
• /
• 2014

The environmental problem is serious due to global warming In a concrete industry, the effort to reduce the problem of the destruction of environment arising from the indiscriminate use of limestone that is the raw material of cement and aggregate and the exhaustion of resources are continually emphasized In this research, the waste porcelain and waste glass that are the natural aggregate substitute materials were mixed and were applied. In addition, the magnesia phosphate composite and fly ash are mixed with a cement substitute material and the properties of the artificial stone was examined. Density, water absorption, rate of aggregate on the surface, compressive strength, and flexural strength were performed. As a result of the test, it is that waste glass with 60% and waste porcelain with 70% are the most excellent mix to produce the artificial stone.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.181-191
• /
• 1991

The present study determined the overall noise level and the distribution of sound pressure level over audible frequency range of noise produced at various work sites. Work-related noise greater than 80dBA produced from 98 separate work sites at 37 manufacturing companies and machine shops were analysed for the overall sound level (dBA) and frequency distribution. In addition, to determine the possible hearing loss related to work site noise, a hearing test was also conducted on 1,374 workers in these work sites. The results of the study were as follows ; 1. Of the total 98 work sites, 57 work sites(58.2%) produced noise exceeding threshold limit value (${\geq}90dBA$) set by the Ministry 01 Labor. In terms of different manufacturing industries the proportion of work sites which exceeded 90dBA was the highest for the cut-stone products industry with 6/6 work sites and lowest for the commercial printing industry with 1/13 work sites. 2. The percentage of workers who were exposed to noise greater than 90dBA was 19.8% (1,040 workers) 01 the total 5,261 workers. In terms of different industries, cut-stone products industry had the most workers exposed to noise exceeding 90dBA with 82.8%, textile bleaching and dyeing industry was next at 30.6% followed by fabricated metal products industry with 27.9%, plastic products manufacturing industry had the lowest percentage of workers exposed to 90dBA exceeding noise with 4.5%. 3. There was a statistically significant correlation between the frequency of noise-induced hearing loss and the percentage of workers exposed to noise exceeding 90dBA (P<0.05). 4. The frequency analysis of noise produced at the 98 work sites revealed that 44 work sites (44.9%) had the maximum sound pressure level at high-frequencies greater than 2KHz. In addition, significantly higher sound pressure level was detected at the high-frequencies at 90dBA exceeding work sites as compared to below 90dBA work sites (P<0.01). 5. The differences in sound level meter's A-and C-weighted sound pressure levels were analysed by frequencies. Of the 28 work sites which showed 0-1 dB difference in the two weighted sound levels, 20 work sites (71.4%) had significantly higher sound pressure levels at high-frequencies greater than 2KHz (P<0.01). Furthermore, there was a tendency for higher sound pressure levels to occur in the high-frequency range as the differences in the two weighted sound levels decreased.

• Fashion & Textile Research Journal
• /
• v.9 no.3
• /
• pp.262-269
• /
• 2007

Traces of ancestors in the era without letters can be found in their legacies and remains such as stone implement, earthenware, dwelling sites, etc. Petroglyph among them reflects their life and spirits as like an epic so that we can be with them through petroglyph. petroglyph is a common culture of mankind, which has been found in various places over the world. The infinite value of traditional culture has a great impact as much as it is unnecessary to more discuss about it. When a culture of a country is reproduced as a world-class product, the country can have visible profits as well as positive effects on diverse fields. The Pangudae petroglyph in Ulsan, consistion of fishery and huntihg religiong, is one of the greatest cultural legacies of the local own uniqueness, and a source and thesaurus of design development. Despite limited tools and unskilled tact, the Pangudae petroglyph Carving shows a strong vital power, which does not change by time, of a whale or a man with various methods such as line and face carving, embossed carving, etc. under a desperate and unconditional purpose, the survival. Thus, the study tries to suggest scarf designs that applies such beauty in fashion design by using the formative beauty caused by natural abrasion through the time, and the feel of lines and stony material.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.1
• /
• pp.109-115
• /
• 2023

Interspecific hybridization is a beneficial strategy in aquaculture. In this study, diploid hybrids were produced through interspecies hybridization of flounder Platichthys bicoloratus ♀ × starry flounder P. stellatus ♂, which became commercial within a year. These hybrids exhibited an advantage in growth ability, with female hybrids growing twice as large as males at 11 months. Furthermore, hybrid flounders exhibited faster growth rates than starry flounders and reciprocal hybrids. The average growth rate of hybrids was 1.37 and 1.18 times greater than that of starry flounder and reciprocal hybrids at 5.5 months, respectively; Additionally, feed efficiency was 1.21 and 1.10 times higher than that of the experimental groups. The experiments were conducted at five temperatures to determine the optimal fry production method. Six weeks of culture resulted in a significant temperature effect, with maximum growth at 27℃. However, over 90% of the males occurred in the groups at temperatures above 24℃. Therefore, the optimum temperatures for survival, growth, condition factor and frequency of the best-sized fingerling at 13 weeks of age were estimated at 21℃. Thus, hybrid flounders are of great potential for use in the flounder aquaculture industry.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.6
• /
• pp.1177-1192
• /
• 2023

This study aims to expand the scope of use for relics by applying the patterns and characteristics of embroidered fabric pieces, such as gold foil, excavated from the Mireuksa Temple Site in Iksan for fashion products. The artifact was a ra decorated with flower and vine patterns, embroidery using gold and red thread, and the unique stitching of Baekje. The pattern was reconstructed, as the embroidery was not well-preserved. This study used two types of gold-foil techniques: laser-cut and stone-stamp gold foil. Considering practicality, the gloss, toughness, custom production possibility, and design implementation were emphasized. The form of the laser-cut gold foil could be transformed; however, a recognition problem with the machine increased the thickness of the stitching. It was used for half-finished goods and commercial casual fashion. The stone-stamp gold foil was finely implemented, but the design was difficult to change. It was used for half-finished silk fabric for making hanbok po and lattice-patterned silk skirts. Applying the developed gold foil to suitable clothing can further enhance the effect.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.4-21
• /
• 2021

A stone mold from the Sabi period of Baekje was excavated at the western tombs in Neungsan-ri, Buyeo where there was a recent excavation survey (2016). It was believed and reported that such stone molds were used for copper needles during the early Iron Age; however, a close re-examination of the form revealed that they were used for bifid ornamental hairpins. Given its casting form, the stone mold of Neungsan-ri is estimated to have been used to make bifid ornamental hairpins in a ∩ shape, narrowing down toward the tip. It is considered an artifact of the Goryeo dynasty. The stone used to make the bifid ornamental hairpin mold of Neungsan-ri was chlorite-schist, the principal minerals of which include chlorite, amphibole, and talc. Similar rocks are in nearby Buyeo (Oesan-myeon), Cheongyang, Gongju, and Yesan. They are mainly found between Jiseon-ri, Oesan-myeon, Buyeo, Sucheol-ri, Yesane-up, and Yesan. Nearly 70 bifid ornamental hairpins from the Goryeo dynasty were excavated at Neungsan-ri, Buyeo and the surrounding areas. Among them, the bronze ones excavated from the tombs of Songguk-ri, Buyeo are estimated to have been made using this mold as they closely resemble the Neungsan-ri mold. Stone was likely the preferred material for molds to make bronze artifacts as it was easy to sink a die. Regarding the bifid ornamental hairpin cast excavated in Neungsan-ri, they obtained stones in nearby areas 20~50km from their location, made bronze artifacts, and distributed them to nearby sites during the Goryeo dynasty. These artifacts suggest that the casting technology of using a stone mold was still employed then.

• Journal of the Korean Professional Engineers Association
• /
• v.16 no.3
• /
• pp.41-53
• /
• 1983

The Dangri Crushed Stone Quarry is located in Dangridong, Busan City, and around the estuary of the Nagdong River. The quarry is considered to be a very promised one in the urban area from the standpoints of the assessment of the aggregate rank, the environmental impacts and the transportation distance. The crushed stones for aggregate of the quarry marks the higher rank in the gravity, the absorption ratio, the abrasion ratio, and the stability in comparison with the JISA 5005. The basement vibrations of the residential section in the vicinity of the quarry, which are arised by the millisecond blasting at the quarry site using the gelatin dynamites less than 39kg in weight, are measured to assess the vibration nuisance. The values of acceleration and the magnitudes are less than eight gals and O on the Richter scale respectively, the vibration nuisance thus can be ignored in such scales of the experiments. The traffic vibrations of the residential section are slightly susceptible. In the experiments, the traffic vibrations appears to be sensibler to the basement than the explosion vibration. The explosion noises in the experiments are not checked not only on the RION Sound Level Meter but also to our ears. The values of traffic noises also are in the safety values of the noise nuisance. The crush dust suspends in the air toward the upper valley in the opposite side of the residential area because of the influences of the sea breeze and the valley wind in the daytime, and the monsoon and the topographic disposition. the dust nuisance thus would not be remained in problem. The quarry is operated in the daytime only. The traffic dust in the residential area will be reduced by the faultless pavement and the careful driving. The elaborate survey on the ridges and peaks surrounded the quarry is recommended to prevent in advance the accidents of the rock slide. Moreover, it is required to make an advisory committee to develop the industry and to save the techniques. The most important matter is the accomodation between the attitude of the enterprising man for the social responsibility to the public nuisance and the cooperative spirit of the inhabitants for the industry.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.6
• /
• pp.375-391
• /
• 2022

Improving public awareness of wood is crucial for expanding the use of wood and establishing a wood culture. In this study, the environment and trends of the public's wood utilization were analyzed using a questionnaire survey and online text mining at a time when eco-friendly practices are gaining popularity. As a result of reducing climatic and environmental concerns and its positive physical and psychological effects, the use of wood is predicted to rise in areas intimately connected to everyday living, such as wood furniture, wooden structures, and interior materials. Nonetheless, there was a negative awareness that wood was expensive, difficult to maintain, and associated with deforestation. The correlations between wood-related search terms on major Korean portal sites were analyzed and categorized into five groups: Wooden architecture, cultural education, woodworking, wood industry, and wood policy. As a building material, wood was seen as more traditional and friendly than reinforced concrete and stone. Eighty-six percent of respondents expected to utilize wood as a building material in the future, regardless of whether the wood is domestically produced or imported. Sixty-five percent responded favorably about the effects of wood on the health of wooden home inhabitants. It is believed that both active publicity and quantifiable value analysis of human and environmental friendliness are required to increase pro-environment awareness of wood utilization.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.1
• /
• pp.183-196
• /
• 2015

With widespread use of smart phones, SNS has been growing rapidly. Companies are required to do its utilization and a preemptive response. However, taking advantage of SNS is still insignificant in the companies. Compared with traditional marketing, people still consider the SNS marketing unfamiliar. This study is aimed at widening the breadth of understanding of marketing activity using SNS and inquiring into its effective applications. In an effort to achieve this research objective, first, this study analyzed the aspect of real applications by reviewing diverse practical business cases. Second, this study provided the momentum of the understanding of SNS marketing-based knowledge. The effective method of producing consumer-intimate products and services lies in customers' participation in development and production. SNS marketing is the very communication and gives ear to a customer's voice. Earnest and creative SNS marketing will play a role as a stepping-stone for businesses to move much closer to a customer.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.1
• /
• pp.13-26
• /
• 2016

Service and technology for the future hyper-connected society, which is every information receive through the mobile internet, will be an Internet of Things. Thus, it is mandatory to derive key standardization work item and establish strategy for the global business with the standardization of device and service platform by the application service. In this study, by analyzing the domestic and international market trends, state of technical development, and standardization of technology, we identified the open platform is the stepping stone for achieving the goal which is establishing the virtuous circulation of IoT ecosystem. Also, we defined emphasized key standardization work item for achieving the open platform are network, server, access authentication, billing system, and software platform. After that, we proposed future strategy direction of standardization. This research could be contribute to the IoT service diffusion by realizing IP communication among low power wireless terminals and implementing light-weight standard internet protocol.