• Journal of Information Technology Services
• /
• v.17 no.2
• /
• pp.83-100
• /
• 2018

Demand for stone products used as building materials is increasing. The construction industry, the value of the stone industry is sufficient, but the domestic stone industry is very lag regarding IT utilization. However, the overseas stone industry produces high-quality products using IT. In this study, we want to offer an IT application technology priority fit for the stone industries. We identify the current status and production process of the stone industries, then set the priority of various IT, so that obtain competitiveness in the domestic stone industries, and minimize the gap between the overseas stone industries. Therefore, we used AHP method; stone industry production processes were selected as the Enterprise Operation Management, Quarrying, Manufacturing, Construction and Maintenance of first-tier. The second-tier ones are consisted of 30 factors out of IT elements. Focus group interviews were conducted to confirm the validity of each factor. As a result, most important factors of first-tier was selected as the order of Manufacturing, Quarrying, Enterprise Operation Management, and Construction & Maintenance. The top 5 of 30 factors in the second-tier were selected Smart Sensor, Mobile Device, Robot of manufacturing, GIS of quarrying, and SCM of enterprise operation management. And the factor that relatively less important was GPS of construction and maintenance. If properly applied an IT application technology for stone industry, we expect to provide efficient production lines and increase customer satisfaction, which will ultimately expand the promotion for the industry and thus act as positive factor in promoting the stone industry.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.231-235
• /
• 2007

Stone Industry in our country is classified mainly in view of supply of raw materials ingredients, as follows: Stone-Quarrying Industry who develops the natural resources, Stone Processing Industry who processes the quarried raw ore into construction materials and stone-products, Stony Mountain-Aggregate Industry who supplies the elementary raw materials ingredients to construction section, respectively. Among them, while Stone Processing Industry sells its turnover around billion-Won level per annum per a company, most of other job sites are paltry, adopting less than 10 employees, and it is real state that their working environments are also very coarse. The Noise originated from processing-instrument which generates at such Stone Processing Industry is as so repeatedly reiterating Loud Noise that most of the spot workers are forcedly imposing such dangers as the severe unpleasant feeling and hearing impairments. On this viewpoint, this Research is now analyzing on the frequency characteristics with regard to the Noise that generated from various processing-instruments, and then based on this, in order to grasp the influence of the Loud Noise generating when process the stone materials, this study has ever evaluated it with PSIL and NR. It is considered that such data could be used as the valuable material for establishment of a comfortable working environment hereafter.

• Fashion & Textile Research Journal
• /
• v.8 no.1
• /
• pp.129-133
• /
• 2006

To develope a high value-added fiber products which is useful in the human body physiology, the Macban stone was deposited on the PET fabric by sputtering and its effects were investigated. Then, a Macban stone target was prepared for sputtering treatment and treated on the PET fabric by RF sputtering process. After treatment, surface observation by SEM, far-infrared emissivity and emissive power, the fastness to washing and light, bacteriostatic rate, electrostatic, drape stiffness, and breaking strength of PET fabric were investigated. From these investigation, the following conclusions were obtained. 1) The Macban stone was able to deposit on the PET fabric, by the RF sputtering treatment which is eco-friendly dry textile finishing. 2) The far-infrared emissivity and emissive power of sputtered PET fabrics were increased. 3) When PET fabric was treated by sputtering with Macban stone, the amount of deposited Macban stone increased with increasing treatment time and it was deposited on the fabric surface firmly. 4) The bacteriostatic rate of sputtered PET fabrics was about 20%. 5) The electrostatic charge of fiber surface was reduced by sputtering. 6) The fastness washing to light of dyed fabric were improved by the deposition of Macban stone, but the breaking strength was not changed by sputtering. 7) The drape stiffness of sputtered PET fabrics increased with increasing treatment time.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.143-149
• /
• 2000

Grinding technology in morden industry society is focusing on research and development for grinding stone and machin-ing parts for the purpose of high accuracy and high efficiency of products. But in order to equip the high technology and high accuracy of micro stone which is one of grinding stone a continuous effort on R& D is require. In this study the honing processing work of 2 cycle engine cylinder for motorcycle which has an open hole is carried out so as to investigate the boring and hone stone effects on accuracy of honing. As the experimental result of this study we could conclude that it is possible to secure good conditions of honing by controlling and keeping appropriate cycle-time in the stage of boring for the prior step of honing.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.164-173
• /
• 2012

Recently, while sharing various values of an individual through fast information delivery with the consciousness change of consumers, the trend is now changing by needs of consumers from the trend that companies took the lead in the past. In addition, while jewelries are changed to fashion's consumer goods, it is time that the domestic jewelry industry also needs development of products applied with various colors and visual emotion that consumers demand. Accordingly, much interest in natural colorful gems and the consumption market are being increased in the jewelry industry. Accordingly, this research has progressed the necessity, the status analysis and consumer preference analysis of products development using Semiprecious Stone, and extracted the target market by style and needs of consumers through a consumer trend survey and image analysis survey for development of products. And, this research has set a design directionality by extracting adjectives that can be applied to design preference images by age. This study has confirmed the necessity and possibility of Semiprecious Stone products development based on the analysis of jewelry market.

• Explosives and Blasting
• /
• v.22 no.1
• /
• pp.81-91
• /
• 2004

Samples examined in this paper were selected from Samwoo building stone, Sinra building stone, Gana building stone, and Chung gin building stone in Kyunggi province and Whakwang industry, Gomoch building stone, and Sejin building stone in Kyungbuk province. The point of this study is to examine the physical and mechanical features of Pochun rock, Munkyung rock and Ildong rock through specific gravity, porosity, absorption, point load test, triaxial compressive test Brazilian test, petrology test and chemical analysis test.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.228-229
• /
• 2018

In the construction industry, we have set goals such as reduction of greenhouse gas emissions and reduction of energy use. In particular, reduction of CO₂ emissions in the concrete manufacturing process, reduction of industrial waste and industrial wastes into concrete The zero-emission level of reuse as a resource is under review. On the other hand, the cost of stone is expensive due to small quantity production of domestic stone production in order, it is difficult to carry and construct with heavy material, and it takes long time to construct. In order to solve the shortage of supply and demand of natural stone, various kinds of stone powder, artificial stone made by putting stone texture on the surface of mortar or concrete, fiber reinforced plate, tiles and the like are increasingly used. In this study, the artificial stone using slag and recycled aggregate instead of natural stone was fabricated and the strength characteristics were evaluated for its applicability and feasibility.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.1
• /
• pp.111-117
• /
• 2017

Stone powder sludge is a byproduct of the crushed aggregate industry, and most of it is dumped with soil in landfills. The disposal of stone powder sludge presents a major environmental problem. This paper investigates the effects of stone powder sludge on the fluidity, density, strength and micro-structure properties of AAC(autoclaved aerated concrete) samples. Stone powder sludge was obtained from a crushed aggregate factory in order to investigate its applicability as a substitute for quartz sand in AAC. To determine the properties of the AAC samples produced with stone powder sludge, specimens containing different foam ratios were produced. Flow value, density, compressive strength, tensile strength and flexural strength of the samples were tested, and X-ray diffraction (XRD) was performed. The test results indicated that the compressive strength of AAC specimens (F120) with stone powder sludge was higher than that of AAC specimens (Q120) with quartz sand for same foam ratio of 120%. For all XRD diagrams, a higher number of tobermorite peaks was shown for the F120 sample than for the Q120 sample, which may explain the slightly higher strength gain in the F120 sample.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.4-11
• /
• 1995

The amounts of waste stone and stone powder sludge that occurred in the quarry and processing plant of s stone plates, have been increased with the development of stone industry. The manufactunng process of 따tificial s stone was studied to reduce the outlet of these wastes and utilIze them as raw materials for architecture, interior decoration and art work. In order to compare the properties of artiflcial stone with those of natural building-stone, the physi$\alpha$II properties of artificial stone such as specific gravity, absorption ratio, elastic wave velocity, compressive s strength, tensile strength, shore hardness, elasticity and Poission's ratio were measured. From the mesaured d data of physical properties, it was found that physical propertIes of artificial stone were controlled by homogeneous m mixing ratio of constituents, molding pressure, and amount of binder. Also, from the thermo-gravimetric analysis, it was found that artIfIcial stone manufactured had a good thermal stability up to $300^{\circ}C$. It was concluded that t the optimum conditions for manufacturing process of artificial stone were $200kg/\textrm{cm}^2$ of molding pressure, 12-15 w weight % of binder amounts.

• International Commerce and Information Review
• /
• v.5 no.2
• /
• pp.47-69
• /
• 2003

The computer was only used to calculate and solve the mathematical problems, to send the simple data, and to exchange the text based informations in the early 1990's. But nowadays, computer technology give us the chance to exchange digital goods and services, etc. And more, computer and computer based systems can be applied everywhere, for example, it can be used at office, at home, and at school. Most of all, one of the remarkable changes is the development of mobile industry, which can be applied anywhere and anytime. So, this study focused on the current situation and promotion plans of the mobile industry. Mobile is based on the IT, IT and mobile technology are the foundation stone of ubiquitous computing environments. Accordingly, this thesis analysis the meaning of ubiquitous, the meaning and roll of mobile industry. With the analysis of this, the conclusion is that to develop and success the new business model at home and overseas, the cooperation of government section and industry section is the most import thing to make it out.