• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2789-2792
• /
• 2012

• Archives of Pharmacal Research
• /
• v.20 no.3
• /
• pp.288-290
• /
• 1997

An efficient synthesis of 3-(E)-hydroxy- and 3-(E)-acetoxypropenylcephem derivatives, key intermediates for the synthesis of 3-(E)-propenylcephalosporins was achieved via Stille coupling reaction of 3-trifloxycephem with 3-(E)-tributylstannylallylic alcohol.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2099-2104
• /
• 2013

We present here an efficient and simple method for preparation of highly active Pd heterogeneous catalyst (CNT-Pd), specifically by reaction of dichlorobis(triphenylphosphine)palladium ($Pd(PPh_3)_2Cl_2$) with thiolated carbon nanotubes (CNTs). The as-prepared CNT-Pd catalysts demonstrated an excellent catalytic activity for the carbon-carbon (C-C) cross-coupling reactions (i.e. Suzuki, Stille, and decarboxylative coupling reactions) under mild conditions. The CNT-Pd catalyst could easily be removed from the reaction mixture; additionally, in the decarboxylative coupling of iodobenzene and phenylpropiolic acid, it showed a six-times recyclability, with no loss of activity. Moreover, once its activity had decreased by repeated recycling, it could easily be reactivated by the addition of phosphine ligands. The remarkable recyclability of the decarboxylative coupling reaction is attributable to the high degree of dispersion of Pd catalysts in CNTs. Aggregation of the Pd catalysts is inhibited by their strong adhesion to the thiolated CNTs during the chemical reactions, thereby permitting their recycling.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.2
• /
• pp.153-158
• /
• 1996

The synthesis of common skeleton of podosporin A and aureol was studied through cationic olefin cyclization as a key step. The generation of thermodynamic silyl enol ether or enol acetate under known conditions gave regioselectivity of 88:12. The enolate alkylation of 2,3-dimethylcyclohexanone with 2,5-dimethoxybenzyl bromide at the more substituted site via lithium enolate gave poor yield. In this case an organozincate or an ammonium enolate also proved to be ineffective or not practical in terms of yield. Side chain elongation of the substituted cyclohexanone 13 through Grignard reaction, Wittig reaction, or Shappiro reaction did not proceed because of steric hindrance and side reactions. However, Stille coupling reaction via enol triflate produced the desired product 18 in high yield. The advanced intermediate 22, which was efficiently synthesized from 18, produced 24 instead of the desired product under a cationic olefin cyclization condition, indicating that the cyclization occurred in a stepwise mannervia the organomercury intermediate 23.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.7
• /
• pp.1175-1182
• /
• 2007

A series of new organic semiconductors hexyl end-capped thiophene-anthracene oligomers containing the anthracene moiety in the center of the oligomers are synthesized. The target oligomers have been obtained by Stille coupling reactions as key step reactions. The synthesized thiophene-anthracene oligomers were characterized by 1H-NMR, 13C-NMR and high-resolution mass spectroscopy, respectively. All of the oligomers are soluble in chlorinated solvents. Their optical, thermal and electrochemical properties were measured. The hexyl end-capped oligomers and their unsubstituted oligomers exhibit the same absorption behavior in dilute toluene solution. Hexyl end-capped bis-terthienylanthracene oligomer is observed to show liquid crystalline mesophase at 166 oC in heating process. The thermal analyses as well as the electrochemical measurement data indicate that the designed materials show better thermal and oxidation stability than the corresponding oligothiophenes without anthracene core. Fluorescence lifetimes and fluorescence quantum yields of the thiophene-anthracene oligomers are measured to be 10-14 ps and 3.4-9.9 × 10?3 which are much shorter and lower than those of oligothiophenes respectively.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.71-77
• /
• 2015

We synthesized a low band gap alternating copolymer containing electron-rich units (i.e. dithienosiloles and benzodithiophenes) and electron-deficient units (i.e. difluorobenzothiadiazoles) for high performance organic solar cells. The polymer was prepared by the Stille coupling reaction and characterized using $^1H$ NMR, GPC, TGA, UV-visible absorption spectroscopy, and cyclic voltammetry. Solar cells were fabricated in a structure of ITO/PEDOT:PSS/polymer: $PC_{70}BM/Al$ with five different blending ratios of polymer and $PC_{70}BM$ (1:1.5, 1:2, 1:3, 1:3.5 and 1:4 by weight ratio). The best efficiency was achieved from the 1:3 ratio of polymer and $PC_{70}BM$ in the photoactive layer, and TEM revealed that there is an optimal nanoscale phase separation between polymer and $PC_{70}BM$ in the 1:3 ratio blend film.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.694-701
• /
• 2013

A new copolymer named T-TI24T (poly((5,5-(2-butyl-5,6-bisdecyloxy-4,7-di-thiophen-2-yl-isoindole-1,3-dione))- alt-(2,5-thiophene))) based on phthalimide derivative and thiophene is synthesized by the Stille-coupling reaction. The polymer shows relatively high number average molecular weight of 86500 g/mol with good solubility in common organic solvents such as chloroform, 1,2-dichlorobenzene, and toluene and is thermally stable up to $380^{\circ}C$. Besides, it possesses a relatively low highest occupied molecular orbital (HOMO) energy level of -5.33 eV, promising the high open circuit voltage ($V_{oc}$) for photovoltaic applications. Active layer solution of polymer T-TI24T-as a donor and (6)-1-(3-(methoxycarbonyl)- {5}-1-phenyl[5,6]-fullerene (PCBM)-as an acceptor in different weight ratios is applied to fabricate the polymer solar cell devices. The ratio of polymer/PCBM affects the solar cell efficiency and the best performance exhibits in the device with polymer/PCBM = 1:3 (w/w), which shows a power conversion efficiency (PCE) of 0.199% and a $V_{oc}$ of 0.99 V, respectively. Even though the device shows the very low PCE, the $V_{oc}$ is higher than that of well known bulk heterojunction type solar cell based on P3HT:PC61BM (c.a. 0.5 V).

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.537-543
• /
• 2013

In this study, the push-pull structure polymer for organic photo voHaics (OPVs) was synthesized and characterized. The poly{4,8-didodecyloxybenzo[1,2-b;3,4-b]dithiophene-alt-5,6-bis(octyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]-thiadiazole} (PDBDT-TBTD) was synthesized by Stille coupling reaction using the benzothiadiazole (BTD) derivative as an electron acceptor and benzodithiophene (BDT) derivative as an electron donor. The structure of monomers and polymers was identified by $^1H-NMR$ and GC-MS. The optical, physical and electrochemical properties of the conjugated polymer were identified by GPC, TGA, UV-Vis and cyclic voltammetry. The number average molecular weight ($M_n$) and initial decomposition temperature (5% weight loss temperature, $T_d$) of PDBDT-TBTD were 6200 and $323^{\circ}C$, respectively. The absorption maxima on the film was about 599 nm and the optical band gap was about 1.70 eV. The structure of device was ITO/PEDOT : PSS/PDBDT-TBTD : $PC_{71}BM/BaF_2/Ba/Al$. PDBDT-TBTD and $PC_{71}BM$ were blended with the weight ratio of 1:2 which were then used as an optical active layer. The power conversion efficiency (PCE) of fabricated device was measured by solar simulator and the best PCE was 2.1%.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1170-1174
• /
• 2013

Benzodithiophene based organic semiconducting polymer was designed and synthesized by stille coupling reaction. The structure of polymer was confirmed by NMR and IR. The weight average molecular weight ($M_w$) of polymer was 8,400 using GPC with polydispersity index of 1.4. The thermal, optical and electrochemical properties of polymer were characterized by TGA and DSC, UV-vis absorption and cyclic voltammetry. OTFT device using PBDT-10 exhibited the mobility of $7.2{\times}10^{-5}\;cm^2\;V^{-1}\;s^{-1}$ and $I_{on}/I_{off}$ of $2.41{\times}10^3$. The film morphology and crystallinity of PBDT-10, was studied using AFM and XRD.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.2963-2968
• /
• 2014

We report synthesis and photovoltaic properties of two new conjugated copolymers, PCPDTQxF and PDTSQxF, with 6,7-difluoro-2,3-dihexylquinoxaline unit prepared by Stille coupling reaction. The advantage of 6,7-difluoro-2,3-dihexylquinoxaline based copolymer are high PCEs due to lower HOMO energy level, long wavelength absorption and high hole mobility. The solid films of PCPDTQxF and PDTSQxF showed absorption bands with maximum peaks at about 623 and 493 nm and the absorption onsets at 711 and 635 nm, corresponding to band gaps of 1.74 and 1.95 eV, respectively. The oxidation onsets of the PCPDTQxF and PDTSQxF polymers were estimated to be 0.68 and 0.95 V, which correspond to HOMO energy levels of -5.48 and -5.75 eV, respectively. The PDTSQxF has lower HOMO energy level as compared to PCPDTQxF to lead higher $V_{OC}$ value. The device comprising PCPDTQxF:PCBM (1:2) dissolved to a concentration of 1 wt % in ODCB showed $V_{OC}$ value of 0.62 V, $J_{SC}$ value of $1.14mA/cm^2$, and FF of 0.35, which yielded PCE of 0.25%.