• Structural Engineering and Mechanics
• /
• 제58권5호
• /
• pp.799-823
• /
• 2016

A finite element model for the non-linear dynamic analysis of a reinforced concrete (RC) containment shell of a nuclear power plant subjected to extreme loads such as impact and earthquake is presented in this work. The impact is modeled by using an uncoupled approach in which a load function is applied at the impact zone. The earthquake load is modeled by prescribing ground accelerations at the base of the structure. The nuclear containment is discretized spatially by using 20-node brick finite elements. The concrete in compression is modeled by using a modified $Dr{\ddot{u}}cker$-Prager elasto-plastic constitutive law where strain rate effects are considered. Cracking of concrete is modeled by using a smeared cracking approach where the tension-stiffening effect is included via a strain-softening rule. A model based on fracture mechanics, using the concept of constant fracture energy release, is used to relate the strain softening effect to the element size in order to guaranty mesh independency in the numerical prediction. The reinforcing bars are represented by incorporated membrane elements with a von Mises elasto-plastic law. Two benchmarks are used to verify the numerical implementation of the present model. Results are presented graphically in terms of displacement histories and cracking patterns. Finally, the influence of the shear transfer model used for cracked concrete as well as the effect due to a base slab incorporation in the numerical modeling are analyzed.

• 한국지반공학회논문집
• /
• 제21권7호
• /
• pp.73-80
• /
• 2005

도로기초에서 입상재료의 응력의존 특성을 반영하면 응력의존 탄성계수와 응력 의존 포와송 비 모두를 동시에 고려할 수 있다. 이 방식은 기존 연속체 역학에 기초한 해석 방식과는 달리 층모형 내에서 인장력의 발생 대신 압축력의 구현이 가능하여 재료의 강성과 연성에 대한 거동을 동시에 반영하여 입상재료층의 변형 예측에 많은 영향을 주고 있다 따라서 본 논문에서는 도로기초를 대상으로 제안된 응력의존 및 변형 모형을 대상으로 유한요소법에 의한 도로기초 층변형 예측 알고리즘을 제안하였고 층변형 예측시 응력의존의 고려에 따른 영향을 분석하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.49-52
• /
• 2004

In this studies, Dapped End Beams(DEB) having disturbed regions were designed by using strut tie model, and the main purpose of this paper is that whether T-headed bars and Steel fibers will be present or not. The ability of DEB with T-headed bars have a superior performance rather than others, such as improved ductility, larger energy adsorption and enhanced post-peak load carrying capability. The capacity of DEB with steel fibers also show increase of ductility, shear strength, fatigue strength and crack. Each DEB with both headed bars and steel fibers, headed bars, and steel fibers as a substitute reinforced steel in the disturbed regions and a DEB with only stirrup and tie reinforced steel were comparable. In contrast, the headed bar stirrups, the tie headed bars and the reinforced steel fibers did not lose their anchorage and hence were able to develop strain hardening and also served to delay buckling of the flexural compression steel. Excellent load-deflection predictions were obtained by increasing the tension stiffening effect to account for high load effects.

• 대한한의진단학회지
• /
• 제9권1호
• /
• pp.59-68
• /
• 2005

Background and purpose: Cardiovascular disease will undoubtedly rise along with the aging of the 'baby-boom' generation. The purpose of this study is to find the new index of the cardiovascular aging. Methods: The effects of aging on the heart and the arterial system are surveyed in the point of structure and function. Results: Arterial stiffening is due to the fatiguing effects of periodic stress on the arterial wall and is the main reason for increasing pulse wave velocity. The systolic hypertension is caused by the early return of wave reflection. The increased after-load by the arterial change leads to the development of left ventricular hypertrophy. The reduction in left ventricular compliance cause the impairments of the diastolic function. In contrast to the lower limb, aging effect in the upper limb are almost due to the ascending aortic pressure wave and the reflected wave from the lower limb. Conclusion: We have the following points. (1) The change of physiological pulse pattern by age can be explained by the early returning of reflected wave. (2) The atrial pulse in old age are generated by the left ventricular hypertrophy.

• 한국농공학회지
• /
• 제26권3호
• /
• pp.68-80
• /
• 1984

This study was attempted in order to investigate the effects of superplasticizers on fresh and hardened concrete. The experimental program included tests on the slump and slump loss, bleeding, time of set, air content, the compacting, factor Vee Dee, compressive strength, tensile and flexural strength, permeability, shrinkage and freege-thaw durability. The major conclusions that can be drawn on the study are as follows. 1. Superplasticizers were observed to have an appreciable fluidifying action in fresh concrete so that tinder appropriate conditions, they either considerably improved its workability or permitted a water reduction of at least 8-12% to be made while maintaining normal workability. 2. The bleeding ratios of base and S,P. Concrete were much lower than those of the conventional concrete. Differences between the base and S.P. Concrete were insignifician. 3. The setting time was the longest for conventionla concrete, followed by S.P. concrete and base concrete in thatorder. And AE water reduction admixtures showed an appreciable influence on the setting and hardening characteristics of concrete and prolonged the stiffening times. 4. The high initial slump values of S.P. concrete generally decreased rapidly with increased standing time. CF values showed increasing tendencies with the increase of S.P. content, and excessive addition of S.P. caused the segregation of fresh concrete, resulting in its rejection. 5. Though there was a slight increase in strength, no significant differences are observed between base and S.P. concrete in terms of the compressive, tensile and flexural strength. 6. The permeability of S.P. concrete was significantly less than that of the conventional concrete, and the shrinkage of S.P. concrete was considerably smaller than that of the conventional concrete, but there were no significant differences between base and S.P. concrete. 7. Compared to base concrete, S.P. concrete without entrained air tended to slightly increase freeze-thaw durability, and S.P. concrete with an appropriate entrained air gave satisfactory resistance to freezing and thawing.

• Structural Engineering and Mechanics
• /
• 제59권3호
• /
• pp.559-577
• /
• 2016

There are many theoretical analyses and experimental studies of the hydrodynamics for the tension leg platform (TLP) of a floating wind turbine. However, there has been little research on the arrangement of the TLP's internal structure. In this study, a TLP model and a 5-MW wind turbine model as proposed by the Minstitute of Technology and the National Renewable Energy Laboratory have been adopted, respectively, to comprehensively analyze wind effects and wave and current combinations. The external additional coupling loads on the TLP and the effects of the loads on variables of the internal structure have been calculated. The study investigates preliminary layout parameters-namely, the thickness of the tension leg body, the contact mode of the top tower on the tension leg, the internal stiffening arrangement, and the formation of the spoke structure-and conducts sensitivity analyses of the TLP internal structure. Stress is found to be at a maximum at the top of the tension leg structure and the maximum stress has low sensitivity to the load application point. Different methods of reducing maximum stress have been researched and analyzed, and the effectiveness of these methods is analyzed. Filling of the spoke structure with concrete is discussed. Since the TLP structure for offshore wind power is still under early exploration, arrangements and the configuration of the internal structure, exploration and improvements are ongoing. With regard to its research and analysis process, this paper aims to guide future applications of tension leg structures for floating wind turbine.

• 대한정형도수물리치료학회지
• /
• 제13권1호
• /
• pp.36-43
• /
• 2007

Purpose: An objective analysis and observations were to be done on hemiplegia patients that are wearing a walking support device, Stroke shoes. Their improvements in walking pace, the reduction of distance between the two knee joint, the increase of curve angle of the knee joint and their steps and the reduction of ankle joint upon swing phase were analyzed using a 20 walking analyzer. Methods: An examination was carried out to see the patients' communication skill and independent walking and then let them walk with the Stroke shoes on to get results before and after wearing it. Simi Reality Motion Systems GmbH (Germany, 2007) was used to analyze the results regarding knee joint and ankle joint angle changes of sagitta plane and coronal plane, stepping distances, distances between the knees and walking pace. Results: 1. The articulation angle of ankle joint during swing phase decreased and knee joint has shown a statistically significant increase in such value(p<0.05). 2. Only knee joint showed a significant increase in articulation angle during heel strike(p<0.05). 3. Knee joint showed a significant increase in articulation angle during toe off(p<0.05). 4. The distance between the two knees as well as their foot steps significantly decreased compared with when Stroke shoes were not worn(p<0.05). 5. Stroke shoes with FES have shown positive effects on the patients in improving their walking styles overall. (p<0.05). Conclusion: There was an improvement in rotation walking pattern by a reduction in the distance between the knees after wearing Stroke shoes with FES. Plantar flexion reduced that occurred in ankle joint during walking and flexion angle increased in knee joint, both of which improved foot drop which was a major problem in hemiplegia patients. Also it is believed that the device will have some positive influences on knee joint stiffening paralysis to aid in improving inefficient walking phases.

• 한국지반공학회지:지반
• /
• 제7권1호
• /
• pp.41-52
• /
• 1991

본 연구에서는 말뚝 기초로 지지된 상부 구조물의 동적 해석을 하였다. 구조물 해석에는 반무한체 방법을 이용하였으며, 이 방법의 입력자료가 되는 임퍼 던스 함수를 구하는 방법과 각 방법으로 구한 상부구조물의 거동을 상호 비교해 보았다. 먼저 단말뚝에 대한 임피던스 함수를 Equivalent Cantilever 방법, Novak이 제안한 방법, Gazetas가 제안한 방법, Kuhlemeyer가 제안한 방법으로 구하였으며, 군 효과는 Novak에 의 해 제안된 방법, 군 효과 비(Group Efficiency Ratio, GER), Poulos가 제안한 정적영향계수를 이용한 방법, Kaynia 8E Kausel이 제안한 동적영향계수를 이용한 방법 등을 이용하였으며, 구조물의 상부 변위, 저 면에서의 전단력과 휨모우먼트에 대한 상호 비교를 하였다. 본 연구에서 얻은 결론은 다음과 같다. 1. 각 방법으로 구한 강성과 감쇠 값은 그 차이가 상당히 크게 나타났으며, Novak이 제안한 방법이 가장 작고, Kuhlemeyer가 제안한 방법이 가장 크게 나타났다. 또한,각 방법에 의한 군효과를 비교, 분석해 본 결과 강성효과는 비교적 유사한 결과를 보이나, 감쇠의 경우 군효과의 차이가 큼을 알 수 있었다. 2.말뚝의 설치로 인해 상부변위는 200A이상 감소하였으며,반면에 말뚝 설치로 인한 강성 증가 효과로 인해 저면에서의 전단력과 휭모우먼트는 크게는 2배 이상 커짐을 알 수 있으며, 공명 현상을 일으키는 frequency가 약 2배 이상 증가함을 알 수 있다. 3. 말뚝 시스템의 강성과 감쇠의 산정시 주파수 종속값과 독립간을 사용한 차이로 인한 상부변 위,저 면에서의 전단력,횝모우먼트의 변화는 비교적 적은 것으로 나타났다. 4. 지진가속도가 커짐에 따라 말뚝의 설치에 의한 상부변위 감소 효과가 더욱 커짐을 알 수 있다.

• 한국전산구조공학회논문집
• /
• 제24권1호
• /
• pp.33-41
• /
• 2011

본 연구에서는 비부착형 포스트텐션 시스템의 해석에 적용할 수 있는 모델링기법을 제시하였다. 모델링은 유한요소 해석 프로그램을 이용하였으며, tube-to-tube contact 요소를 도입하여 강연선의 물리적 형상을 직접적으로 모델링하는 방법과 실제의 강연선 외에 가상의 강연선을 콘크리트에 매입하고, 두 개의 강연선을 스프링으로 연결하여 간접적으로 모델링하는 방법을 동시에 제시하고 비교하였다. 콘크리트의 인장경화 현상을 무시하였을때 두 모델링기법에서는 거의 동일한 결과를 제공하지만 콘크리트의 인장경화를 고려한 경우에는 스프링을 이용한 간접적인 모델링기법을 통해서만 결과를 얻을 수 있었으며, 결과 또한 콘크리트의 경화현상을 고려하지 않은 경우와 다소 상이하였다. 비교를 통하여 비부착형 포스트텐션 시스템의 모델링기법으로 스프링을 이용한 모델링기법을 최종적으로 선정하고 기존의 실험적 연구에서 인용한 실험결과와 해석결과를 비교, 검증하였으며 또한 파라미터 스터디를 통해서 모델링의 적절성을 확인하였다.

• 펄프종이기술
• /
• 제48권1호
• /
• pp.75-81
• /
• 2016

This study was conducted to investigate the effects of deep eutectic solvent (DES) treatment on BCTMP fibers and handsheets properties. DES was prepared using lactic acid and betaine (LB), and the molar ratio of these two components mixtures was controlled to 2:1 (LB 2:1) and 5:1 (LB 5:1). As results, 2% of BCTMP pulp (o.d. weight) was extracted when it was treated by LB 5:1 at $50^{\circ}C$ for 12 hours, stirring constantly at 120 rpm. In contrast, lignin was not extracted when BCTMP was mildly treated by the LB DES mixed with 50% of distilled water at the reacting condition of temperature $60^{\circ}C$ for 2 hours using water bath. These results indicate that conditioned water content and adequate reaction time are needed to achieve effective extraction of lignin. It was also found that stiffening of cellulose fiber due to the mild treatment of LB DES to BCTMP fiber leads to the increase of paper bulk without the loss of strength.