• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.6
• /
• pp.619-625
• /
• 1997

In this paper, we show that the rotor position of the bifilar-wound hybrid stepping motors for the closed-loop drives is detected by the phase current measurement. We propose an instantaneous phase current equation, which is the function of electrical angle, by modeling the stepping motor including motor driving circuits. We also analyze the relationship between phase current and rotor position from the computer simulation results. We show that the information about the rotor position is obtained from the phase current amplitude and its derivatives at the instance of ${\pi}/2$ electrical angle of excitation voltage.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.389-396
• /
• 1988

Microprocessor-based software DDA interpolator is developed and applied to two axis contouring control of X-Y table. Developed assembly program is composed of feedrate, linear and circular DDA interpolation routines. Reference-pulse type of open-loop stepping motor control system in which the micro-computer produces a sequence of reference pulses for each axis of motion is adopted. To test performance of the developed program, X-Y table drive system based on stepping motor and shaft encoder is designed. Conturing error of the system in linear and circular path is within .+-. 0.2mm under start stop pulse rate of stepping motor.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.899-905
• /
• 2014

In this paper, we propose a method that can be used to back-stepping controller design for speed control of Brushless Direct Current (BLDC) motor. First, back-stepping controller is designed with load torque estimator. The estimator is included to adapt to the variation of load torque in real time. Finally, the proposed controller is tested through experiment with a 120W BLDC motor for the angular velocity reference tracking performance and load torque volatility estimation. The simulation result verifies the performance of the proposed controller.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.118-120
• /
• 1997

A Lineal Stepping Motor (LSM) can operate in an open loop control mode similarly to a rotary stepping motor. However, the LSM has a large transient vibration, and it sometimes causes the miss-step. In this paper, a new vibration suppression method using an energy stored in winding inductance and induced voltage of the LPM is proposed.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.91-97
• /
• 2004

This paper describes the design of a 2-phase stepping motor driver using CPLD(Complex Programmable Logic Device). The driver IC such as L297(SGS-Thomson Microelectronics), which is mostly used has some difficulties in PWM control because of the switching noise of power MOSFETs. It causes current ripple and acoustic noise. To improve theses characteristics, we proposed a new current control method that the output PWM frequency is almost constant using a digital filter. Also we proposed constant current method for 1-2 phase(half step) excitation. The proposed method is implemented with CPLD(Xilinx, XC9572-PC44). Experimental results show the effectiveness of the proposed method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.5
• /
• pp.361-368
• /
• 2010

This paper presents high speed position controller using stepping motor. The proposed position controller has close loop and open loop mode. In the high speed region, torque angle which is controlled by PI controller and memory based look-up table, is used to keep the reference position. The memory based look-up table produces a torque angle according to motor speed, and the PI controller can compensate the torque angle error. So, the fast dynamic response can be expected in the same position error. The open loop control mode which is divided by 3-modes control the actual position in the low speed and small position error. Each open loop modes are designed to reduce position error and dynamic brake in the stop command. The proposed position control scheme is verified by the practical stepping motor.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.6
• /
• pp.881-889
• /
• 2013

In this paper, a nonlinear and adaptive back-stepping control technique is proposed for a speed control of IPMSM(Interior Permanent Magnet Synchronous Motor). The gain of back-stepping controller(including integral value of the states error) is designed for stability of the system. In order to adapting fast in variation of load torque, the controller is including load torque estimator. The simulation is completed by using PSIM software. The simulation results show that the designed back-stepping controller make the system stable in the constant torque region, and has better tracking performance than a controller without the integral gain.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1413-1422
• /
• 2012

Adaptive back stepping control technique may provide robust control characteristics under parameter perturbation caused by changing external condition. In order to synthesize a high-precision velocity controller for IPMSM(Interior Permanent Magnet Synchronous Motor) using this method, the period of control loop should be very small. However, because of the resolution of the encoder for speed measurement, control cycle is limited, which makes it difficult to improve the performance of the controller. This paper proposes a velocity controller design method based on nonlinear adaptive back-stepping method to accomplish fast and accurate performance. Here, an EKF(Extended Kalman Filter) method is incorporated for the estimation of the motor speed into the design of a speed controller using adapted back-stepping control technique. The performance of the proposed controller is demonstrated through simulation using PSIM.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.3
• /
• pp.280-288
• /
• 1997

In this paper, we will show that the torque ripple in closed-loop drives of permanent magnet stepping motors is reduced as properly selected lead angle control method. We propose an instantaneous torque equation, which is the function of lead angle, to estimate the influence on torque ripple. We design a closed-loop lead angle control system based on the proposed instantaneous torque equation and measure the instantaneous torque in various excitation modes. It is shown that torque ripple is greatly reduced, as seen from the experimental results as well as from the computer simulation results. For example, torque ripple reduced from 78.25% to 46.82% in the case of 50 PPS single-phase excitation mode operation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.899-906
• /
• 2020

Motor control requires robust and precise control performance even in the presence of errors in the mathematical model of the motor and disturbances acting on the motor. For robust and precise control, a disturbance observer was designed to estimate the load fluctuation and applied to a back-stepping controller designed as a nominal system. The control performance of the designed system was verified by applying it to the 120 [W] Brushless Direct Current Motor. As a result of the position control and speed control, the disturbance is overcome from the steady state error converges to zero, and asymptotically stable results can be confirmed.