• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.554-560
• /
• 1999

In this paper, a vibration suppression method using an energy stored in winding inductance and an induced v voltage of the Linear Stepping Motor(LSM) is shown, and it is applied to a new one-phase excitation method A And a magnetic equivalent circuit is based on the structure of the LSM, and then the electric equivalent circuit of the LSM is derived by solving equations for the magnetic equivalent circuit. Several dynamic characteristics of the LSM are analyzed by the ACSL with the voltage equations, the force equations and the kinetic equation, a and are measured by experimental system.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.1
• /
• pp.39-42
• /
• 2005

Though full 3D analysis is the proper method to analyze the hybrid stepping motor (HSM), it has weak points in the areas of computation time and complexity. This paper introduces 2D FEA using a virtual magnetic barrier for the axial cross section to save computation time. For the purpose of 2D FEA, the virtual magnetic barrier and equivalent permanent magnet model of HSM are proposed. This result is compared with that of experimental and 3D analysis, considered as a reference result.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.228-231
• /
• 1987

Microprocessor-based software DDA interpolator is developed and applied to two axis contouring control of X-Y table. Developed assembly program is composed of feedrate, linear and circular DDA interpolation routines. Reference-pulse type of open-loop stepping motor control system in which the micro-computer produces a sequence of reference pulses for each axis of motion is adopted. To test performance of the developed program, X-Y table drive system based on stepping motor and shaft encoder is designed. Contouring error of the system in linear and circular path is within .+-.0.2 mm.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.107-109
• /
• 2004

Stepping motors are widely used for various electric instruments. In case of analysing claw pole PM slopping motor 3-dimensional analysis is necessary for accurate field calculation. This paper presents static torque characteristics of a permanent magnet type stepping motor with claw poles using three-dimensional finite element analysis.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.9
• /
• pp.615-621
• /
• 2004

This paper describes the design of a 2-phase stepping motor driver using CPLD. The driver IC such as L297, which is mostly used has some difficulties in PWM current control because of the switching noise of power MOSFETs. The switching noise causes current ripple and acoustic noise. To reduce the switching noise, we designed a digital filter using VHDL. Also we designed constant current method for 1-2 phase(half step) excitation to reduce the torque ripple. Experimental results show the effectiveness of the proposed method. It is enabling further enhancements of stepping motor drive technology broadening the range of applications for the stepping motors.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.299-303
• /
• 2003

Position decision system embody to interpret for observation target position. Observation target is observed at observation post of 3 places. CCD cameras of observation post is achieved turning control by stepping motor. Controller interpret observation target's position to use direction and angle information of observation post. Controller and observation post used PIC16F877. PIC16F877 achieves rotation control of stepping motor and distance arithmetic of observation target. Result that measure this system 50 times was achieved correct position interpretation of 47 times. Position interpretation failure of 3 times was construed for cause in used controller special quality.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.24-26
• /
• 2004

The PM(Permanent Magnet) stepping Motor has been used widely to a variety of industries because of the open-loop control characteristic, a relatively large frequency range of velocity control and non-accumulated error of the step angle. Moreover, It has been gradually applied to office automation, machine intelligence, digital appliance, and automobile parts. This paper presents the optimal design results by use of the experimental method. The design variables of the PM stepping motor are shape of the claw-pole, material of core, and air-gap. As a result, a superior claw-pole PM stepping motor for OA machinery was developed.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.118-120
• /
• 1997

A Lineal Stepping Motor (LSM) can operate in an open loop control mode similarly to a rotary stepping motor. However, the LSM has a large transient vibration, and it sometimes causes the miss-step. In this paper, a new vibration suppression method using an energy stored in winding inductance and induced voltage of the LPM is proposed.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1264-1266
• /
• 2005

This paper analyzes static and transient response characteristics of a permanent magnet type stepping motor with claw poles using three-dimensional finite element method. The outer diameter of the stepping motor to be analyzed is approximately 6 mm. In this paper we analyzes only 2 poles of the stepping motor, which has 10 magnetic poles made up of NdFeB material, using periodic boundary condition. We clarify transient response and static torque charateristics using Maxwell 3D and Matlab Simulink.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.6
• /
• pp.481-488
• /
• 2022

This study proposes compensation methods for the initial position error and torque ripple in vector control of two-phase hybrid stepping motors. Stepping motors have an asymmetrical structure due to misalignment, such as the eccentricity generated by the manufacturing and assembly process. When vector control is applied using the position information measured by an incremental encoder attached to the rotor shaft of such stepping motors, the following problems occur. First, an initial position error occurs during the forced excitation process for the initial rotor position alignment. Second, torque ripple corresponding to the mechanical rotation frequency is generated. In this study, these non-ideal phenomena that occur in vector control of the stepping motor are analyzed, and compensation methods are proposed to eliminate them. The validity of the proposed initial position error and torque ripple compensation methods is verified through experiments on a two-phase hybrid stepping motor drive system.