• 전기학회논문지P
• /
• 제65권4호
• /
• pp.255-261
• /
• 2016

Korean Power System are operating a load shedding system to prevent voltage instability phenomenon caused by severe line contingencies. In order to apply the load shedding scheme should be selected a location, amount, delay time. Current load shedding system is load shedding amount that has been calculated in the steady-state analysis to load shed the total amount in first level, load shedding amount calculated in advance, it is possible to perform an unnecessary load shedding. In this paper, set a multi-level load shedding control strategy step-by-step selection of load shedding amount for the prevention of excessive load shedding. In addition, through a voltage resilience analysis of the power system by applying motor load ratio and sensitivity parameter to selection the multi level load shedding ratio and delay time. For this reason, to take advantage of the limit data of interchange power, by utilizing interface power flow data to set a multi-level load shedding control strategy for the stabilization of the Korean Power System.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.133-136
• /
• 1991

New phase-energization strategies are proposed to minimize torque ripple of closed-loop controlled 2-phase Bifilar Hybrid step motors. Lead angle and conduction angles are important parameters in minimizing torque ripple factors. The phase-energization control strategy that minimizes torque ripples for the given average torque is proposed. In this paper, Fourier series are applied to produce the average torque. The strategy is performed by controlling both lead angle and conduction angle of the input voltage wave-form for each phase.

• 대한안전경영과학회지
• /
• 제3권2호
• /
• pp.133-144
• /
• 2001

This article deals with the multiple alternative proposal of Strategy. when Decision makers meet a very complex and important problems to take a good choice. It might not be easy that we make a decision and accept the decision as an exact result of analysis at a complication and uncertain situation. Although the decision under unpredictable state is many existence and each field is classified to support it. he can not provide exact estimations and be able to specify a result and forecasting. This is the reason why the original research use Statistical Survey method and Visual Decision Making Process(VDMP) to improve decision analysis method. Therefore, Our research suggests that the VDMP utilized in the strategic decision making situation as a group decision adding tool, can be applied in the development of a process vision and implementation plan. as a result, researcher describe step by step the process of VDMP.

• 전기학회논문지
• /
• 제58권9호
• /
• pp.1681-1688
• /
• 2009

This paper proposes a new fault restoration method which adopts the recloser as top agent to release the problems of the data concentration and fault processing delay of the existing DAS(distribution Automation System) under the ubiquitous distribution system. In proposed method, top agent collects the data based on the multi-casting communication with the tie switches of the interconnection point, and then selects a closed switch(tie switch) to transfer the sound outage load to other feeders based on the heuristic search strategy step by step until the load transfer work is finished. Here, a new heuristic rule is developed which can guarantee the relational load balancing and line loss from the collected voltage data. Finally, the several faults are simulated for typical multi-section and multi-interconnection distribution system to prove the effectiveness of the proposed strategy, in particular, for each simulation cases, the load balancing index and line loss index of the obtained solution from the proposed method is compared with those of all of feasible solutions.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권4호
• /
• pp.526-534
• /
• 2016

A MEMS solid propellant thruster array shall be operated within an allowable range of operating temperatures to avoid ignition failure by incomplete combustion due to a time delay in ignition. The structural safety of the MEMS thruster array under severe on-orbit thermal conditions can also be guaranteed by a suitable thermal control. In this study, we propose a thermal control strategy to perform on-orbit verification of a MEMS thruster module, which is expected to be the primary payload of the STEP Cube Lab mission. The strategy involves, the use of micro-igniters as heaters and temperature sensors for active thermal control because an additional heater cannot be implemented in the current design. In addition, we made efforts to reduce the launch loads transmitted to the MEMS thruster module at the system level structural design. The effectiveness of the proposed thermo-mechanical design strategy has been demonstrated by numerical analysis.

• 대한전자공학회논문지
• /
• 제26권5호
• /
• pp.60-70
• /
• 1989

본 연구는 인버터로 구동되는 유도전동기에서 발생되는 토오크 맥동을 표현하는, 고조파 토오크 함수 HTF(harmonic torque function)를 제안하고, 컴퓨터 시뮬레이션과 실험을 통하여 HTF의 타당성을 입증하였다. 제안된 HTF는 고조파 전류의 크기 뿐만 아니라 위상까지 고려하므로서 부하변동에 무관한 고조파 토오크 함수가 되었으며, 이를 six-step. SPWM 및 TPWM의 펄스 폭 제어 인버터에 적용하여 비교하였다. 그 결과 PAWM 인버터에서의 우수한 제어방법이 선택되었다. 한 주기당 펄스수가 9이하에서는 six-step이, 출력전압 크기와 토오크 맥동의 측면에서, SPWM 및 TPWM보다 우수함을 알 수 있었다.

• Nano
• /
• 제13권11호
• /
• pp.1850135.1-1850135.8
• /
• 2018

A one-step high-temperature solvothermal approach to the synthesis of monolayer or bilayer $MoS_2$ anchored onto reduced graphene oxide (RGO) sheet (denoted as $MoS_2/RGO$) is described. It was found that single-layered or double-layered $MoS_2$ were synthesized directly without an extra exfoliation step and well dispersed on the surface of crumpled RGO sheets with random orientation. The prepared $MoS_2/RGO$ composites delivered a high reversible capacity of $900mAhg^{-1}$ after 200 cycles at a current density of $200mAg^{-1}$ as well as good rate capability as anode active material for lithium ion batteries. This one-step high-temperature hydrothermal strategy provides a simple, cost-effective and eco-friendly way to the fabrication of exfoliated $MoS_2$ layers deposited onto RGO sheets.

• 한국과학교육학회지
• /
• 제24권1호
• /
• pp.171-182
• /
• 2004

The purpose of this study is to analyze lesson plans from third to sixth grades of science and to find out teaching strategies in respects of learning functions provided by preservice elementary teachers in education university. On the whole, to control students' learning process preservice teachers used more shared-regulation strategy than strong teacher-regulation one. Teaching activities for regulative learning function were most used in strategy of strong teacher-regulation, and in strategy of shared-regulation those for cognitive learning functions were most used. But teaching activities for affective learning functions were used a little considered in both teaching strategies. In introduction step of instruction, affective and regulative learning functions were more instructed by strong teacher-regulation strategy and cognitive learning functions were more instructed by shared-regulation strategy. The affective, cognitive, and regulative learning functions were largely planned by shared-regulation teaching strategy in development. The regulative learning functions were planned by strong teacher-regulation strategy than by shared-regulation strategy and affective learning functions were considered a little bit in consolidation. There was a tendency that strong teacherregulation strategy was increased in lessons for fifth and sixth grade.

• Nuclear Engineering and Technology
• /
• 제31권2호
• /
• pp.192-201
• /
• 1999

This paper proposes an improved signal processing strategy for accurate feedwater flowrate estimation in nuclear power plants. It is generally known that ∼2% thermal power errors occur due to fouling Phenomena in feedwater flowmeters. In the strategy Proposed, the noises included in feedwater flowrate signal are classified into rapidly varying noises and gradually varying noises according to the characteristics in a frequency domain. The estimation precision is enhanced by introducing a low pass filter with the wavelet analysis against rapidly varying noises, and an autoassociative neural network which takes charge of the correction of only gradually varying noises. The modified multivariate stratification sampling using the concept of time stratification and MAXIMIN criteria is developed to overcome the shortcoming of a general random sampling. In addition the multi-stage robust training method is developed to increase the quality and reliability of training signals. Some validations using the simulated data from a micro-simulator were carried out. In the validation tests, the proposed methodology removed both rapidly varying noises and gradually varying noises respectively in each de-noising step, and 5.54% root mean square errors of initial noisy signals were decreased to 0.674% after de-noising. These results indicate that it is possible to estimate the reactor thermal power more elaborately by adopting this strategy.

• 수산경영론집
• /
• 제50권4호
• /
• pp.1-9
• /
• 2019

Seaweed by-products have been dumped into the sea and induced marine pollution. However, they can be recycled as a valuable natural resources. Approximately 240,000 tons of sea mustard and kelp by-products were estimated to be producted during the last three years. The estimate corresponds 6.7% of the total production of marine aquaculture and 14.9% of the total production of seaweeds. When adding up the by-products from fish and mollusks, approximately 1,000,000 tons of fisheries by-products were thrown out into the sea every year. A three-step strategy is required for the industralization of fisheries by-products. The first step is the construction of the processing foundation of by-products, the second is its food industralization, and the third is its recycling as raw biomaterials. The stable supply of raw materials is the prerequisite for the industralization. Thus, it is necessary to construct the refuse logistics around chief production districts and to build the processing facility and frozen storage of by-products. Cooperation among private enterprises and government investment for research and development is required the second and third steps.