• Archives of Plastic Surgery
• /
• 제50권2호
• /
• pp.142-147
• /
• 2023

Some of Asian eyelids have double fold and some do not. Many people tend to prefer double eyelid in aesthetic and functional reasons. Since the mechanism of double eyelid is bonding the eyelid skin to the eye-opening tissue, the principle of double eyelid surgery is also connecting the eyelid skin to levator component. Double eyelids are differentiated by their shape according to the height and curvature. The double eyelid surgery procedure is divided into incision method and nonincision method. And the incision method is subdivided into double fold line design, skin and oculi muscle incision or excision, pretarsal or preaponeurotic soft tissue excision, fixation of posterior lamella to anterior lamella, and skin suture. The nonincision method is to connect the posterior lamella and the anterior lamella as a thread only without an incision. A successful double eyelid surgery creates a fold well-balanced in height, curvature, and depth of the fold based on patient's preference. In this article, the author's own methods of performing surgery are described, with a step-by-step guide and surgical tips.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.704-706
• /
• 1991

In CAD/CAM system, many efforts are made to automate the converting process from drawling information to manufacturing Information. The most difficult step In this procedure is utilizing 2 dimensional drawing information In order to formulate 3 dimensional w&ling information. This paper emphasizes to mWe automatically series of convertirg steps which provide 3 dimensional wire frame, surface and solid modeling using feature recognition rules. With the standardization of design process and the recognition rule as preceding steps, it shows a good application tool to interface the design and manufacturing procedures in PC-Level CAD/CAM system.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.574-578
• /
• 2005

The project objectives, called critical-to-quality (CTQs) in six sigma, should be defined to faithfully reflect the customer requirements. The identification of such a set of CTQs, which is currently done using brainstorming in practice, is a challenging task. Notwithstanding the rapid growth of the six sigma literature, development of a systematic procedure for identifying CTQs has scarcely been addressed. This paper proposes a systematic method for generating CTQ candidates based on the given voice of the customer in the DFSS/C (Design for Six Sigma / Commercial) context. By providing a step-by-step procedure, the proposed method ensures that all the important CTQ candidates are identified and subjective judgments are minimally required. Hence, the shortcomings associated with the existing practice based on brainstorming can be effectively overcome. The unique characteristics of the proposed method are also demonstrated via a case study.

• 인터넷정보학회논문지
• /
• 제16권3호
• /
• pp.33-41
• /
• 2015

본 논문에서는 디지털논리회로의 설계에 있어 필수적인 카르노 맵 간략화 과정을 교육용 자바 애플릿의 형태로 구현하였다. 학습자는 구현된 자바 애플릿으로부터 흥미로운 학습을 경험할 수 있으며, 자바 애플릿 설계과정에서 교육공학적인 요소를 단계별로 고려하였기 때문에 학습 효율의 극대화가 가능하다. 학습자는 구현된 자바 애플릿으로부터 디지털 논리회로의 간략화 과정을 마우스로 버튼을 클릭하거나 텍스트를 채워가면서 웹상에서 가상실험을 진행한다. 또한, 간략화 과정에서 발생되는 논리식과 논리회로도는 학습자가 효율적으로 학습할 수 있도록 서로 다른 프레임으로 구성하였으며, 학습자가 구성한 논리회로도가 올바르게 구성되었는지 확인할 수 있도록 하였다. 마지막으로 본 논문에서는 수정된 Quine-McCluskey 간략화 기법에 기초하여 자바 애플릿을 구현하였기 때문에 오프라인 교육의 보조도구로서 사용된다면 학습효율의 향상에 기여할 수 있다는 것을 입증하였다.

• 한국산학기술학회논문지
• /
• 제10권3호
• /
• pp.500-506
• /
• 2009

본 논문은 주요 부위에 대한 정적음력 시뮬레이션을 통해 PFA 라이닝 플러그밸브 본체의 설계자를 지원하는 것을 주된 목표로 한다. CAD 작업을 통해 생성된 형상 모델을 스텝(step)파일로 변환하여 해석작업에 사용한다. 전문적인 해석경험이 없는 밸브 생산업체의 설계자가 형상 모델에 대한 인장, 굽힘, 비틀림 모멘트 등을 계산하는 과정을 이해함으로써 구조적 취약점을 사전에 파악하고, 제품에 반영하여 제품 신뢰도 및 설계효율 증대에 기여할 수 있는 기본적인 방안을 제시하고자 하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권1호
• /
• pp.28-37
• /
• 2017

Purpose: This paper proposes a procedure that may infer and identify interaction failures in a module. Methods: In design FMEA, we defined an interaction model between components and proposed a method for selecting a single component by using the standard specification classification table and four methods for choosing the related components. We also introduced the function tree for function and requirement characteristic analysis and proposed utilization of standard stress lists and 1st and 2nd stress analysis tables to determine the effect the stress analysis has on interactions. Finally, the interaction mechanism diagram was proposed and used to infer the failure mechanism. Process FMEA also established procedures in a similar way. Results: We established a procedure for predicting the failure mode due to interaction between components based on Company A's multi-step FMEA procedure. Conclusion: By applying the proposed interaction FMEA procedure to the development model, we were able to confirm the effect of the new derivation on the failure mode of interaction, which was not predicted by the existing FMEA.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권2호
• /
• pp.254-261
• /
• 2000

Since callus distraction technique was applied clinically for the correction of dentofacial deformity to the patients with hemifacial dysplasia by McCarthy in 1992, many surgeons have tried to apply this method to the maxillofacial region. But this technique has some drawbacks. One of the disadvantages of this technique is extensive scar formation in the facial area, which is a sequelae of extraoral approach for supraperiosteal dissection of the periosteum overlying the mandible. Recently, we have made an effort to perform this technique through intraoral approaches to prevent scar formation on the submandibular area and modified the design of the osteotomy, that is step osteotomy technique, to increase the raw bone surface on both osteotomized segments. The rationale for the application of this step osteotomy technique is to increase the amount of regenerated bone and the length of distraction, to avoid damage of inferior alveolar neurovascular bundle, and to increase initial stability of the splitted segments. Step osteotomy procedure can be done with fine micro-osteotomy saw through subperiosteal tunneling. Extraoral pins should be inserted before making the osteotomy. Since 1994 we have applied this technique at 8 sites In 5 patients with mandibular deficiencies: 2 cases of hemifacial microsomia, 1 case of developmental facial asymmetry and 2 cases of mandibular bony defect. Mandibular elongation have been achieved from 12 to 20mm in length. 1 out of 8 site, we experienced non-union in the case of mandibular body defect. Some skeletal relapse and growth retardation phenomenon have been observed in some cases with the longest follow-up of 48 months.

• Advances in aircraft and spacecraft science
• /
• 제10권3호
• /
• pp.223-243
• /
• 2023

There is a burgeoning demand for minimizing the mass of satellites because of its direct impact on reducing launch-to-orbit cost. This must be done without compromising the structure's efficiency. The present paper introduces a relatively low-cost and easily implementable approach for optimizing structural mass to a maximum natural frequency. The natural frequencies of the satellite are of utmost pertinence to the application requirements, as the sensitive electronic instrumentation and onboard computers should not be affected by the vibrations of the satellite structure. This methodology is applied to a realistic model of Al-Azhar University micro-satellite in partnership with the Egyptian Space Agency. The procedure used in structural design can be summarized in two steps. The first step is to select the most favorable primary structural configuration among several different candidate variants. The nominated variant is selected as the one scoring maximum relative dynamic stiffness. The second step is to use perforation patterns reduce the overall mass of structural elements in the selected variant without changing the weight. The results of the presented procedure demonstrate that the mass reduction percentage was found to be 39% when compared to the unperforated configuration that had the same plate thickness. The findings of this study challenge the commonly accepted notion that isogrid perforations are the most effective means of achieving the goal of reducing mass while maintaining stiffness. Rather, the study highlights the potential benefits of exploring a wider range of perforation unit cells during the design process. The study revealed that rectangular perforation patterns had the lowest efficiency in terms of modal stiffness, while triangular patterns resulted in the highest efficiency. These results suggest that there may be significant gains to be made by considering a broader range of perforation shapes and configurations in the design of lightweight structures.

• 산업경영시스템학회지
• /
• 제39권2호
• /
• pp.37-45
• /
• 2016

Control chart is representative tools of statistical process control (SPC). It is a graph that plotting the characteristic values from the process. It has two steps (or Phase). First step is a procedure for finding a process parameters. It is called Phase I. This step is to find the process parameters by using data obtained from in-controlled process. It is a step that the standard value was not determined. Another step is monitoring process by already known process parameters from Phase I. It is called Phase II. These control chart is the process quality characteristic value for management, which is plotted dot whether the existence within the control limit or not. But, this is not given information about the economic loss that occurs when a product characteristic value does not match the target value. In order to meet the customer needs, company not only consider stability of the process variation but also produce the product that is meet the target value. Taguchi's quadratic loss function is include information about economic loss that occurred by the mismatch the target value. However, Taguchi's quadratic loss function is very simple quadratic curve. It is difficult to realistically reflect the increased amount of loss that due to a deviation from the target value. Also, it can be well explained by only on condition that the normal process. Spiring proposed an alternative loss function that called reflected normal loss function (RNLF). In this paper, we design a new control chart for overcome these disadvantage by using the Spiring's RNLF. And we demonstrate effectiveness of new control chart by comparing its average run length (ARL) with ${\bar{x}}-R$ control chart and expected loss control chart (ELCC).

• 한국공간구조학회논문집
• /
• 제20권1호
• /
• pp.87-94
• /
• 2020

A corrugated steel plate wall (CSPW) system is advantageous to secure the strength and stiffness required for lateral force resistance because of its high out-of-plane stability. It can also stably dissipate large amounts of energy even after peak strength. In this paper, a preliminary study has been carried out to use the CSPW system in the seismic retrofit of existing reinforced concrete (RC) moment frame buildings. The seismic performance for an example building was evaluated, and then a step-by-step retrofit design procedure for the CSPW was proposed. An equivalent analytical model of the CSPW was also introduced for a practical analysis of the retrofitted building, and the strengthening effect was finally evaluated based on the results of nonlinear analysis.