• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.369-376
• /
• 2000

Parameters that represent the characteristic of consolidation have been determined by the oedometer tests. They are varied by the process of sampling and transportation, accuracy of apparatus, process of sample trimming and the skill of engineers. Also, it is difficult to grasp what factor exert a influence on the parameters. In this study, Slurry Rowe Cell Tests were peformed to evaluate the disturbance. Using the plot of e - log p which obtained from Rowe Cell test results, we compared the swelling indexes at the stress relief and the last loading stage. With that result, we tried to presume the disturbance of the 330 oedometer tests. The plot of compression-swelling index at the stress relief considerably scattered but at the last step of load shows a correlations between them. And the plot of depth-p$\sub$c/ shows a correlation with the different swelling indexes, but not in the LL-p$\sub$c/. Consequently, it is considered that the disturbance of the consolidation tests can be presumed by the comparison of the difference of swelling index.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.4
• /
• pp.123-128
• /
• 2002

This study was performed to use fiber mixed soil which has clayey soil or sandy soil with fibrillated fiber or monofilament fiber on purpose of construction materials, filling materials, and back filling materials. In addition, this study was conducted to analyze strength properties and fiber reinforcing effect with fiber mixed soil by direct-shear test. In case of fibrillated fiber mixed soil, the more quantity of fiber was in both cohesive soil and sandy soil, the larger shear stress was in respective step of normal load. The respective mixed soil at 0.5% and 0.1% mixing ratio of monofilament fiber mixed soil showed maximum shear stress. According to unconfined compression or direct-shear test, making specimen of the monofilament fiber mixed soil, it is required to be careful and stable mixing method, while it is expected that monofilament fiber mixed soil doesn't increase strength.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.9
• /
• pp.33-45
• /
• 2004

Sandfill at reclaimed sites is usually formed by more than one placement method. Reclaimed sandfill often shows highly variable profiles and the cone penetration test is most commonly used for site characterization. Correlations between cone resistance and geotechnical parameters for sand are influenced by in-situ stress level and it is important to incorporate stress level effect. In this study, cone penetration tests were performed at several elevations from the top of a 10m high surcharge, which was later removed step by step. In order to establish more reliable correlations between cone resistance and geotechnical parameters for sand, different ways of normalizing cone resistance by the corresponding in-situ vertical stress were investigated.

• The Korean Journal of Applied Statistics
• /
• v.8 no.2
• /
• pp.121-132
• /
• 1995

In this paper we consider optimal designs of partially step-stress life testing which is deviced for k-component series systems with the considerably long life time. Test items are first run simultaneously at use condition for a specified time, and the surviving items are then run at accelerated condition until a predetermined censoring time. The optimal criterion for the change time to accelerated condition is to minimized either the generalized asymptotic variance of maximum likelihood estimators of the hazard rates at use condition and the acceleration factors or the asymptotic variance of the maximum likelihood estimators of the acceleration factors.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.1
• /
• pp.8-22
• /
• 2020

In this study, we investigated the deactivation characteristics of Ni-Zn-Fe electrodes due to intermittent operation in alkaline water electrolysis. To find suitable method to accelerate deactivation of electrode, the accelerated stress-test (AST) which repeated on/off step was performed with constant current/voltage control. The AST under constant voltage control is suitable to deactivate electrode so it were selected to investigate deactivation of electrode. The AST which repeated on/off step in range of -1.3 V and 0 V was performed and the relationship between oxidation current and electrode deactivation in the off step was investigate. As results, it was confirmed that the nickel and zinc on electrode surface were oxidized due to anodic current which occurred at off step.

• Progress in Superconductivity and Cryogenics
• /
• v.25 no.4
• /
• pp.28-31
• /
• 2023

This study presents a comprehensive procedure for the low cycle fatigue test of ultrasonically welded (UW) coated conductor (CC) lap-joints. The entire process is examined in detail, from the robust fabrication of the UW REBCO CC joints to the reliability testing under a low number of repeated cycle fatigue conditions. A continuous I_c measurement system enables real-time monitoring of I_c variations throughout the fatigue tests. The study aims to provide a step-by-step procedure that involves joint fabrication, electromechanical property (EMP) tests under uniaxial tension for stress level determination, and subsequent low-cycle fatigue tests. The joints are fabricated using a hybrid method that combines UW with adding In-Sn soldering, achieving a flux-free hybrid welding approach (UW-HW flux-free). The selected conditions for the low cycle fatigue tests include a stress ratio of R=0.1 and a frequency of 0.02 Hz. The results reveal some insights into the fatigue behavior, irreversible changes, and cumulative damage in the CC joints.

• Journal of Korean Society for Quality Management
• /
• v.24 no.4
• /
• pp.14-28
• /
• 1996

We consider optimal designs of partially accelerated life testing which is deviced for parallel systems with the considerably long life time. In partially step-stress life testing, test items are first run simultaneously at use condition for a specified time, and the surviving items are then run at accelerated condition until a predetermined censoring time. In partially constant-stress life testing, test items are run at either use or accelerated condition only until a specified censoring time. The optimal criterion for each test is to minimize either the generalized asymptotic variance of maximum likelihood(ML) estimators of the hazard rates at use condition and the acceleration factors or the asymptotic variance of the ML estimators of the acceleration factors.

• Journal of Ocean Engineering and Technology
• /
• v.4 no.1
• /
• pp.88-100
• /
• 1990

Among the test methods to evaluate stress-corrosion cracking(SCC) on the basis of fracture mechanics, constant displacement(bolt) loading method using modified-WOL specimen is practically convenient. In this test method, compliance formula is generally required to calculate load(consequently $K_{ISCC}$). There are many problems in using the analytic compliance formula to calculate $K_{ISCC}$, so we had proposed the experimental $K_{ISCC}$ evaluation technique in the previous report. This study has employed the slightly altered configuration of modified-WOL specimen made of weldable structural stee(BS360-50D). With these specimens, stress-corrosion tests have been performed in $H_2S$ gas saturated 20% HCl solution. Through the test, the problems as mentioned earlier have been discussed again, and the proposed evaluation technique has been verified. And the stress-corrosion cracks and hydrogen blisters have been investigated in the initiation step with the aids of metallurgical micrographs, SEM fractographs, and EPMA analysis. The inclusions segregated in the mid-thickness region traps hydrogen to produce the hydrogen blistering. The applied or residual stress does not contribute the occurrence of the blister. Hydrogen absorbed into the mid-thickness region is consumed to produce the blistering so that stress-corrosion crack could hardly be detected at that region. The stress-corrosion cracks initiate from the inclusions and propagate in radial pattern. And the initiation site is remote from the crack tip and is inclined from the crack plane, which is assumed to be caused by the triaxial stress and the amount of the absorbed hydrogen.

• Journal of Korean Home Economics Education Association
• /
• v.3 no.1
• /
• pp.131-146
• /
• 1991

The purpose of this study is to acquire basic materials to help the students Others of families in their homes through understanding them. This study was based on the questions asked to 100 students without parents in their homes and 100 students in standard homes. Percentage, T-test, counseling sample were used for statistical report. The following are the analysed results of this study. 1. Among the ten events, except for family life and economic problems, there were no distinguished contrasts between the students without parents in their homes and the students in standard homes. 2. The factors influencing stress are mainly plan for future, social environment, school life and learning and students without parents are especially affected by economic problem. 3. Comparing students without parents with one another in stress, the students without parents have economic problem and deficiency of affeetion, the students without father economic problem and their mothers health, the students without mother the difficulty of house affairs and emotional uneasiness of family. The students with step-mother have much misunderstasnding because of the lack of conversation among their family. The students with step-father hardly kconverse with their father and feel uneasy in family life. Based on all can be gailed these results, the following conclusion. 1) The students Other Types of families are stressed much more than the students in standard homes in family life and economic problems. 2) All Students are Stressed by bad environment, the plan of future, scholl and learning, 3) Comparing the Stubents without parents with one another, the students without parents have economics probem and deficiency of affeetion, the students without father economic problem and their mothers health, the students without mother house affairs and emotional uneasiness off family. The students of step-father and step-mother have the misuder standing by the lark of comversation, the deficiency of affection and the uneasiness off family life.

• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.386-394
• /
• 2023

This study investigated changes in salivary cortisol, lactic acid, and heart rate along the route during walking exercise in a forest environment for the purpose of reducing stress. Walking exercise in a forest environment was conducted on a Hill Type (Distance: 800m, Average slope 25°, Altitude 112m) and Step Type (Distance: 800m, Average slope 25°, Altitude 114m) routes for 10 female college students in their 20s. The subjects were asked to walk at a speed of 60 bpm. The resulting changes in salivary cortisol, lactate, and average heart rate during exercise were compared and analyzed using Repeated Measurement two-way ANOVA, and the maximum heart rate during exercise and average heart rate at rest were compared and analyzed using paired t-test, and the following results were obtained. First, there was no significant difference in salivary cortisol depending on the type and period of the forest, but it tended to gradually decrease. Second, there was a significant difference in lactic acid depending on the type and period, and it was higher in Step Type. Third, there was a significant difference in the average heart rate during exercise, and it was higher in Step Type. Fourth, there was a significant difference in maximum heart rate during exercise, and it was higher in Step Type. Fifth, there was no significant difference in average heart rate during rest. In summary, walking exercise in a forest environment can be effective for stress reduction for female college students in their 20s, but it appears that forest routes should be selected according to physical strength level, and walking exercise in a forest environment for long periods of time is not recommended. For this purpose, it is suggested that it is appropriate to select the Hill Type route.