• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.925-926
• /
• 2006

This paper presents a sensorless speed control of an interior permanent magnet synchronous motor using an adaptive integral binary observer and fuzzy logic controller. In view of composition with a main loop regulator and an auxiliary loop regulator, the binary observer has a property of the chattering alleviation in the constant boundary layer. However, the steady state estimation accuracy and robustness are dependent upon the width of the constant boundary. In order to improve the steady state performance of the binary observer, the binary observer is formed by adding extra integral dynamics to the switching hyperplane equation. Also, because the conventional fixed gain PI controller are very sensitive to step change of command speed, parameter variations and load disturbance, the fuzzy logic controller is used to compensate a fixed gain PI controller. Therefore, a gain PI is fixed and the IPMSM is drived at another speed region. The effectiveness of the proposed the adaptive integral observer and the fuzzy logic controller are confirmed by experimental results.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.809-810
• /
• 2016

본 논문에서는 주행 중 운전자가 브레이크 페달을 조작할 경우, 차량 후미의 브레이크등과 연계되어 점등됨과 동시에 차량의 감속 정도에 따라 점등되는 영역이 단계적으로 점멸되며 표시되는 속도 감응형 차량용 브레이크등 시스템을 구현하여 실험적으로 확인하였다. 뒤따르는 후방 차량이 선행차량의 감속상태를 더욱 쉽고 빠르게 인지시킴으로써 선행 차량의 급정거에 따른 추돌 사고를 예방할 수 있으며, 후방 차량의 신속한 대응을 이끌어낼 수 있다. 또한 초음파 센서를 이용하여 차간 거리가 일정 거리 이상으로 가까워지는 경우, 부져와 함께 비상등이 켜지며 후방 차량의 운전자에게 상황을 전달한다.

• 대한물리의학회지
• /
• 제19권3호
• /
• pp.91-101
• /
• 2024

PURPOSE: This study examined the effects of balance exercises accompanied by ankle fixation on the healthy side on the balance control ability and gait of patients with subacute stroke. METHODS: The study was conducted on 23 patients with subacute stroke. Eleven people were assigned randomly to the experimental group who performed balance exercises with ankle fixation on the healthy side, and 12 were assigned to the control group who performed balance exercises without ankle fixation. The intervention was conducted for 30 minutes three times a week for four weeks. The Berg Balance Scale, a weight-bearing ratio measurement, was performed to evaluate the balance ability before and after intervention. The gait symmetry, walking speed, cadence, step length, and 10-meter walk test were conducted to evaluate the walking ability. RESULTS: A significant difference in the Berg Balance Scale was observed between before and after the intervention in the experimental group. A comparison of the two groups also revealed a significant difference. Significant differences in the gait symmetry, walking speed, and step length measurements were observed before and after the intervention in the experimental group, and significant differences in the gait symmetry and step length measurements were observed between the two groups. CONCLUSION: Through this study, balance exercises with the healthy side ankle fixed showed qualitative improvement in the balance and walking ability, suggesting future directions for the rehabilitation treatment of stroke patients.

• 조명전기설비학회논문지
• /
• 제23권8호
• /
• pp.57-66
• /
• 2009

종래의 고정된 이득을 가진 PI 제어기는 지령속도, 부하변화 등과 같은 파라미터 변동에 대해서 매우 민감하다. IPMSM 드라이브의 정확한 속도제어는 비선형적인 전자기적 발생저항뿐만 아니라 회전자 속도와 권선저항사이의 비선형적 관계 때문에 복잡한 문제점이 있다. 따라서 광범위한 동작상태에서 최적 제어를 위해 PI 제어기의 이득값을 실시간으로 조절해야한다. 본 논문은 FNN과 ALM을 이용하여 IPMSM 드라이브의 HIPI 제어기를 제시한다. 제시된 제어기는 ANN을 이용하여 속도를 추정하고, 시스템 외란에 대해서 IPMSM 드라이브의 고성능 속도제어를 제시한다. PI 제어기의 이득값은 모든 동작상태에서 ALM-FNN에 의해 최적화 되어진다. 제시된 제어기는 다양한 동작상태에 대한 분석을 통해 타당성을 입증한다.

• 제어로봇시스템학회논문지
• /
• 제2권4호
• /
• pp.337-343
• /
• 1996

In this paper, we investigate the defect detection by making use of pre-made reference image data and classify the defects by using the artificial neural network. The approach is composed of three main parts. The first step consists of a proper generation of two reference image data by using a low level morphological technique. The second step proceeds by performing three times logical bit operations between two ready-made reference images and just captured image to be tested. This results in defects image only. In the third step, by extracting four features from each detected defect, followed by assigning them into the input nodes of an already trained artificial neural network we can obtain a defect class corresponding to the features. All of the image data are formed in a bit level for the reduction of data size as well as time saving. Experimental results show that proposed algorithms are found to be effective for flexible defect detection, robust classification, and high speed process by adopting a simple logic operation.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.461-466
• /
• 2005

This paper presents a new speed control scheme of the spindle induction motor (IM) using fuzzy-logic control in fold weakening region. The implementation of the proposed FLC-based spindle IM are investigated and compared to those obtained from the conventional PI controller based drive system, we have confirmed good simulation and experimental results at different dynamic operating conditions such as sudden change in command speed, step change, etc.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.135-138
• /
• 2009

In this paper, a novel maximum power point tracking (MPPT) for a PMSG-based variable speed wind power system is proposed using the fuzzy logic algorithm. The control algorithm is developed based on the normal hill climb searching (HCS) method, commonly used in wind energy conversion systems (WECS). The inputs of fuzzy-based controller are the derivations of DC output power and the step size of DC/DC converter duty cycles. The main advantages of the proposed MPPT method are no need to measure the wind velocity and the generator rotational speed. As such, the control algorithm is independent of turbine characteristics, achieving the fast dynamic responses with non-linear fuzzy systems. The effectiveness of the proposed MPPT strategy has been verified through the simulated results.

• 한국정밀공학회지
• /
• 제27권6호
• /
• pp.39-46
• /
• 2010

Linear induction motor is adopted as an actuator of the planar stage. An inherently poor characteristic at zero or ultra-low speed zone of the induction motor is remarkably improved due to a recent development of power electronic semiconductor technology and a spatial vector control theory. At present, a servo response speed of the induction motor reaches 90 percent of one of PM synchronous or BLDC motor. Specially, as a secondary of the induction motor can be constructed using uniform conducting sheets, there is no periodic force ripple as in PM motors. So, the induction motor can be superior to another driving means under a certain condition. This paper discusses the overall development procedure of non-contact planar stage with a big workspace using linear induction motors.

• 한국컴퓨터그래픽스학회논문지
• /
• 제22권3호
• /
• pp.1-9
• /
• 2016

볼륨 가시화의 샘플링 단계에서는 보통 선형 보간이 사용된다. 선형 보간은 일반적으로 좋은 화질의 영상을 생성하지만 의료영상 소프트웨어는 높은 화질의 영상이 필요하기 때문에 경우에 따라 높은 기대에 미치지 못한다. 본 연구는 샘플링 단계에서 B 스플라인을 기반으로 하는 삼차 보간을 수행한다. 기존의 B 스플라인은 제어점을 지나지 않는 근사 함수이므로, 본 연구는 제어점을 이동하여 생성된 곡선이 원래의 제어점을 지나도록 하였다. 가시화 단계에서는 속도를 향상하기 위해 빈공간 도약을 적용 가능하다. 빈공간을 파악하기 위해서는 각 블록에 대한 최대값과 최소값을 계산해야 한다. B 스플라인은 볼록포 성질이 있어서, 제어점의 값을 최대값과 최소값으로 사용할 수 있다. 그 결과로 삼차 보간 기반의 볼륨 가시화가 대화적 속도로 가능하다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.106-108
• /
• 2008

This paper deals with the design for speed controller to drive PMSM by matrix converter without DC-link circuit as the power conversion system of AC servo motor drive. To design the speed controller of PMSM drive, the closed-loop transfer function of speed controller is calculated and then the frequency-domain response characteristics are analyzed by bode plot using Matlab. Based on the results by bode plot, the speed control gains are determined. As the real effects of controller designed in the frequency-domain display in the time-domain, the performance of speed controller is confirmed by the step response of speed controller. The design examples are shown and its validity of the design method mentioned in the paper is verified through PSIM simulation.