• Fire Science and Engineering
• /
• v.32 no.1
• /
• pp.7-15
• /
• 2018

The prediction performance of combustion models in the Fire Dynamics Simulator (FDS) were evaluated by comparing with experiment for compartment propane gas fires. The mixture fraction model in the FDS v5.5.3 and Eddy Dissipation Concept (EDC) model in the FDS v6.6.3 were adopted in the simulations. Four chemical reaction mechanisms, such as 1-step Mixing Controlled, 2-step Mixing Controlled, 3-step Mixing Controlled and 3-step Mixed (Mixing Controlled + finite chemical reactions) reactions, were implemented in the EDC model. The simulation results with each combustion model showed similar level for the temperature inside the compartment. The prediction performance of FDS with each combustion model showed significant differences for the CO concentration while no distinguished differences were identified for the $O_2$ and $CO_2$ concentrations. The EDC 3-step Mixing Controlled largely over-predicted the CO concentration obtained by experiment and the mixture fraction model under-predicted the experiment slightly. The EDC 3-step Mixed showed the best prediction performance for the CO concentration and the EDC 2-step Mixing Controlled also predicted the CO concentration reasonably. The EDC 1-step Mixing Controlled significantly under-predict the experimental CO concentration when the previously suggested CO yield was adopted. The FDS simulation with the EDC 1-step Mixing Controlled showed difficulties in predicting the $CO_2$ concentration when the CO yield was modified to predict the CO concentration reasonably.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.106-114
• /
• 2015

Despite a series of various developments in underwater acoustic sensor networks, there are still occasions of loss of connection over the network. Because sufficient amounts of drawbacks causing disconnections posed particularly in the middle of connection over the network emerge in the ocean environment, there is a need of new testing mechanism for underwater acoustic networks. In this paper, we proposed to investigate the most vital parts of the network deployment whether they function well in order, without any failure so as to identify where exactly communication process problems and failures are. We introduce step-wised out-test mechanism for UWASNS and accomplished the mechanism by implementing experiments and rigorously checked all the underwater devices utilizing out-test function. Experimental results and out-test function are evinced by implementing, in order to explain our system and conclude with possible future improvements.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.9
• /
• pp.1253-1262
• /
• 2001

Experimental study is conducted to investigate the heat/mass transfer and flow characteristics for the flow over backward-facing step and cavities. A naphthalene sublimation method has been employed to measure the mass transfer coefficients on the duct wall and LDV system has been used to obtain mean velocity profiles and turbulence intensities. Reynolds number based on the step height and free stream velocity is 20,000 and St numbers of acoustic excitations given to separated flow are 0.2 to 0.4. The spectra of streamwise velocity fluctuation show a sharp peak forcing frequency for an acoustically excited flow. The results reveal that the vortex pairing and overall turbulence level are enhanced by the acoustic excitation and a significant decrease in the reattachment length and the increased turbulence intensity are observed with the excitation. A certain acoustic excitation increases considerably the heat/mass transfer coefficient at the reattachment point and in the recirculation region. For the cavities, heat/mass transfer is enhanced by the acoustic excitation due to the elevated turbulence intensity. For the 10H cavity, the flow pattern is significantly changed with the acoustic excitation. However, for the 5H cavity, the acoustic excitation has little effect on the flow pattern in the cavity.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.73-83
• /
• 2008

The purpose of this study was to investigate kinematic variables of three types of volleyball jump blocking motions through 3D video analysis. The subjects participated in this study were 7 male university volleyball players and 7 male physical education majors. 1. Regardless of blocking types, peak vertical velocity and jump height in the skilled group were faster and higher than the unskilled group. 2. The skilled group was flexed lower than the unskilled group at E2 of the hip, knee, and ankle joint during the cross over step blocking. 3. In all types of step, the peak angular velocity of the hip, knee, and ankle joint was showed at E2. 4. The skilled group was slower than the unskilled group at E2 of the angular velocity of the hip, knee, and ankle joint during cross over step blocking. In conclusion, the cross over step blocking in which the use of the upper extremities was relatively more available was effective to improve a defence skill for the jump height.

• Korean Chemical Engineering Research
• /
• v.45 no.2
• /
• pp.190-196
• /
• 2007

This study examined the nitrate removal efficiency which uses an electrowinning, and also analyzed the nitrate removal efficiency under a variety of operating conditions such as nitrate concentrations, pH, current densities, electrodes, reducing agents in order to determine optimal conditions. In addition, the multi-step electro-chemical process test has been also analyzed. During the electrowinning, the identical Zn-Zn and Pt-Ti electrodes in the insoluble oxidation electrode(Pt) has shown the highest nitrate removal efficiency in the 100 mg $NO_3^{-}$ -N/L concentration. In the concentration of 150 mg $NO_3^{-}$ -N/L, the efficiency of the Zn-Zn electrode were 70~85%, and that of Pt-Ti electrode were 40~50% without any change of pH. In the high concentration of 500 and 1,000 mg $NO_3^{-}$ -N/L, the higher the concentration, the more decrease of its nitrate removal efficiency decreased. However, the energy consumed for nitrogen removal increased when the nitrate concentration was high. As a result of the multi-step electro-chemical process test, We chose the Test 4. Because the first, most of the zinc consumed from 1 step was recovered from over the 2 step. The second, amount of consumption anode decreased with insoluble anode Pt from over the 2 step. And the third, Zn cathode increased the possibility of reusing Zn deposited. In view of the results so far achieved, the multi-step electro-chemical process would be applied to treat nitrogen involved in metal finishing wastewater.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.3
• /
• pp.147-156
• /
• 2008

Objectives : Oriental Medicine Music Therapy is a new way of treating and preventing various diseases and promoting health by means of music specially picked and designed to produce Qi(氣) fitting to an individual person in the areas of the structure of human body, physiological function, pathological change, diagnosis and treatment. Therefore, it can facilitate the efficiency of the treatment much better and faster than only with herb or acupuncture. Equilibrium between body and mind is its originality. Methods : A 38-year old man came to hospital suffering from left side weakness, dysarthria because of cerebral infarction. After one week's medication in the part of neurology, he was sent to the oriental medicine music therapy center, and he took ten times' medical treatments once a day. Before and after the treatments, implementing 'Ink foot print analysis', as for the movement capacity and walking of left side weakness, these results are acquired. Results and Conclusions : 1. Before the oriental medicine music therapy, except the acceleration and deceleration section, within three meters, a right foot's step was measured 30.55 cm and a left foot was measured 15.2 cm, and the step distance was 15.2 cm. After the 10 times treatments, the right foot's step was 112.6 cm, the left foot's step was 113 cm, and the step distance improved to 51.8 cm. 2. The normal person's average step is about 38 cm, and it could be decreased owing to a decreptitude, pain, fatigue, and the weakness of the legs. In spite of all, from the increased 50 cm step measurement with the patient's body condition, it means that his movement capacity is recovered. 3. In the measurement of walking time, before 10 times treatments, it took 46.35 seconds within 6M, but after the treatments, it increased to 7.47 seconds as same as a normal person's walking speed. 4. In insomnia, and the abnormality of a facial muscle, it shows lots of improvement, and even the accuracy of a pronunciation, but despite of the 10 times treatments, the 'ㄹ(r)' sound placed under a vowel is unclear. 5. Before the 10 times' treatments, he can move the left side shoulder with pain and cannot move below the left elbow. After the treatments, the pain was disappeared, and he was able to move over 60 cm without pain. And improving of the movement of fingers, he can beat over 8 times with a drumstick.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.3
• /
• pp.121-127
• /
• 2004

This paper presents a new vertex selection scheme for shape approximation. In the proposed method, final vertex points are determined by "two-step procedure". In the first step, initial vertices are simply selected on the contour, which constitute a subset of the original contour, using conventional methods such as an iterated refinement method (IRM) or a progressive vertex selection (PVS) method In the second step, a vertex adjustment Process is incorporated to generate final vertices which are no more confined to the contour and optimal in the view of the given distortion measure. For the optimality of the final vertices, the dynamic programming (DP)-based solution for the adjustment of vertices is proposed. There are two main contributions of this work First, we show that DP can be successfully applied to vertex adjustment. Second, by using DP, the global optimality in the vertex selection can be achieved without iterative processes. Experimental results are presented to show the superiority of our method over the traditional methods.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.44-49
• /
• 1996

후방계단(backward facting step) 주위의 난류 유동 특성을 수치 해석을 통해 파악하고자 하였다. 지배방정식은 2차 정도의 유한 차분 기법으로 이산화하였으며 비교차격자계를 사용하여 양해법으로 계산하였다. 난류 모형으로는 이층 모형(two-layer)을 사용하였고 압력 Poisson 방정식을 이용하여 압력과 속도를 연성 시켰다. Re=44,000인 경우에 대해 계산 결과로 부터 후방 계단 뒤의 속도 벡터, 유선, 압력 및 속도 분포, 재부착 길이(reattachment length)등의 실험치와 비교하였다. 본 계산에 사용한 수치 해석 기법은 박리등이 포함된 복잡한 난류 유동 현상을 잘 재현할 수 있음을 확인할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.3039-3045
• /
• 1994

The k-$\varepsilon$ turbulence models by Launder et al.(1977, LPS) and Leschziner and Rodi(1981, LR) are modified to account for the secondary straining effect with having a generality in the present paper. The modified models are obtained by replacing the gradient Richardson number used to account for the secondary straining effect in the original models by a new parameter with a tensor-invariant correction form. These two modified models are used to predict the turbulent flow over a backward-facing step. In contrast to both standard and modified LR models, the modified LPS model is found to predict the reattachment point fairy well, as well as mean velocity, wall static pressure, turbulent kinetic energy and Reynolds shear stress in the recirculating region.

• Journal for History of Mathematics
• /
• v.15 no.1
• /
• pp.15-42
• /
• 2002

Dialectical Methods is the form in which thinking and being developed, according to Hegel. Every given definition removes itself necessarily and goes over to its contrary definition. The mutual struggle brings us to a new definition, which is richer and more concrete insofar as it embraces the original definition, but on a higher level. The purpose of this study is to enhancing student's creative thinking in mathematics by dialectical methods. The conclusions drawn from the results obtained in this study are as follows, First the introduction of dialectical methods to mathematics education had been made by Lakatos, Brousseau, Freudenthal. Second, the dialectical teaching methods in mathematics are developed from dialectical methods: the step of affirmation - the step of negation - the step of sublation. Third, the students who team mathematics by dialectical teaching methods are creative in its implications.