• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.132-140
• /
• 2000

In conventional drilling, burr geometry can be changed according to the variation of drill geometry like point angle, rake angle. Step drilling is proposed to minimize the burr formation in drilling operation. The burr formed in first cutting can be removed in second cutting by the edge in step. The burr formed in second cutting by the edge in step can be minimized according to the change of geometry like, step angle and depth. The mechanism in step drilling is analyzed. Some step drills are applied to drilling the input shaft which is used for vehicle steering. To measure the burr formed in drilling, laser and height gage are used.

• 한국운동역학회지
• /
• 제24권1호
• /
• pp.67-74
• /
• 2014

This study researched into the left-right inclination of the rear foot at the lower limb joints, knee joint angle, angular velocity of the knee joint, angular acceleration and the max. Based on the analysis of kinematics according to the changes in the height of step box (6, 8, 10 inches) during step aerobics of female college students majoring in physical education. The findings of this study are as follows: Then angle of the knee joint decreased as the height of the step box increased the min. Angle was measured right before the right foot was on the step box, and the angle tended to decrease as the step box get heightened. The left-right inclination of the rearfoot angle according to the height of step box increased as the height increased. In the 'pull-up' stage during which the weight was loaded on the right foot the angle increased, while in the right foot stepping stage during which the right foot was on the ground, the left-right inclination of the rearfoot angle increased as the height of the step box increased. The angular velocity of the knee joint according to the height of step box started increasing when the right foot initially stepped on the step box and during the initial stepping section, the angular velocity decreased as the height of step box increased. The changes in angular acceleration of the knee joint according to the height of step box increased as the height of step box increased.

• The Journal of Korean Physical Therapy
• /
• 제8권1호
• /
• pp.33-47
• /
• 1996

This study was performed to examine the correlation between calcaneus to tibia angle and Q-angle, and the effects of step width and toe out angle on the calcaneus to tibia angle and Q-angle. The age of participated subjects was from 19 to 29 years(Mean=22.95, SD=2.23) who have no significant orthopedic and neurological dysfunction. The marking tapes for measurement of Q-angle and calcaneus to tibia angle were placed on seven location of each subject. Video data were collected while the subject walked on a walking grid. The result as follows : 1. There were significant differences in the step width, toe out angle, and Q-angle but not calcaneus to tibia angle between male and female. 2. There were significant differences in toe calcaneus to tibia angle and Q-angle n step width increased, respectively. 3. There were significant differences between tee out angle and calcaneus to tibia angle but not toe out angle and q-angle. 4. There was statistically significant correlation between calcaneus to tibia angle and Q-angle.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.47-53
• /
• 2006

An Experiment was carried out to find the scheme far minimization of burr formation on inclined exit surface in drilling. Several drills with different geometry are used for drilling the workpiece with inclined exit surface. Step drills are specified with step angle and step size. The influence of the inclination angle of exit surface on burr formation was observed, which enables to analyze the burr formation mechanism on inclined exit surface. Along the edge on the inclined exit surface, burrs are formed by the bending deflection to feed direction and also burrs are formed in exit direction of cutting edge. To minimize the burr formed in feed direction, the corner angle which is formed by the inclination angle and step angle must be large enough not to be bent to burr. By decreasing step angle of drill and decreasing the distance between two axes of two holes, burr formation at the intersecting holes can be minimized. Burr formation mechanisms are analyzed according to the drill geometries and cutting conditions. Several schemes far burr minimization on inclined exit surface were proposed.

• 제어로봇시스템학회논문지
• /
• 제19권4호
• /
• pp.334-340
• /
• 2013

Using a relationship between step length and accelerometer output, step length can be estimated. In this paper, we propose a new step length estimation algorithm, which can be used both for the plane and the slope by compensating the slope angle. The slope angle is estimated using a barometer and the slope angle is compensated by observing how the slope affects the step length estimation. The proposed algorithm is verified using five adult man walking data, where the average length error is about 3% regardless of the slope.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1991년도 추계학술발표회논문집
• /
• pp.84-88
• /
• 1991

The lead angle control of step motor for high speed drive is represented in this paper. It was designed position and speed information feedback system which was composed of step motor coupled with encoder, z-80, and hardware. The relationships between the lead angle and speed characteristics are established by experiments.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.149-163
• /
• 2004

This study analyzed kinematic variables about the cross step, the delivery and the release for women's javelin athletics recorded over 50m in the 2004 Busan International Athletics Competition. It was used the Kwon3D Motion Analysis Package Ver. 3.1 Program(Kwon, 2000) for analysing the kinematic variables about the distance, the velocity, and the angle, then we had the results as follows; 1 In the Cross step phase, the COG velocity was low because their step length was short. To keep the CM velocity from the approach to the last cross over step contact, the athletes have to keep the longer step length within about 130% of the athletics' height. 2. In the Delivery phase, the athletics' COG height was gradually lower, and the deceleration of the COG was going up. As the same in the cross step, Therefore the athletes have to increase the step length within about 100% of their height, in order to increasing the COG velocity. And it was shown they have to make small angle of the elbow as possible from the right foot contact to the left foot contact in order to being the big acceleration of the upperarm at the release phase. 3. In the release phase, it was shown to being low position of the release point as the COG was low and then the release velocity of the upperarm was low. Specially when the shoulder lean lateral angle is big at the release phase, it was shown they have a excessive release angle. And, when it was shown the high rotation angle of the shoulder, the shoulder was opened forward bigger than the trunk was opened forward. So the transmission of velocity from the proximal segments was a fast change.

• 대한가정학회지
• /
• 제29권3호
• /
• pp.23-34
• /
• 1991

With 10 subjects of 6-year-old children residing in Pusan, I analyzed the relation of walking types(step angle, step width, step and stride) and wear comfort according to the style and size fo shoes in order to reveal the fitness of children's shoes centered on the relationship of shoes size and walking. Three styles of children's shoes(laced and unlaced formal shoes, magic-taped sports shoes) ranging in five different size were used. The following are conclusions. 1. As to step angle, there was no conceivable change in the left side, while the right side had a significance in accordance with the shoes size at p<0.001. As the size grew, right step angle of all shoes increased, with unlaced shoes having more influence than others. Step angle were the smallest when all the sampled shoes made the difference of 5mm between foot size and shoes size. 2. As to step width, there was no conceivable change in the style of shoes, while shoes size had a significance at p<0.001. As the size grew, step width also increased. Step width were the smallest when all the sampled shoes made the difference of 5mm between foot size and shoes size. 3. Step and stride, however, took no significance at all, since they were not influenced by the size or style of the shoes. 4. Wear comfort had a significance at the level of p<0.001. Since it was influenced by the size or style of the shoes. The best wear comfort was felt when all the sampled shoes had laces and magic tapes as well as the size with the difference of 5-10mm between foot size and shoes size.

• 융복합기술연구소 논문집
• /
• 제4권1호
• /
• pp.33-35
• /
• 2014

Investigation of flow characteristics behind a edged backward facing step is important for selecting appropriate positions of building constructions in the desert area. In the present study, the effect of edge angles on the flow characteristics is investigated using a commercial software CFD-ACE+. When the edge angle is less than 30 degree, reattachment length decreases, whereas when the edge angle is larger than 30 degrees, reattachment angle increases. It can be concluded that the flow patterns behind an edged backward facing step is classified as the two, streamlined and bluffed bodies. Appropriate edge angles have an effect of increasing the momentum toward the wall, which can reduce the reattachment length. It can be said that present results can be utilized for diverse industrial applications that includes the backward facing step.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권2호
• /
• pp.204-210
• /
• 2000

The mandibular contour determines the shape of the lower part of the face and thus influences the appearance of the face. A patient with a large, squarish, or broad face who desires a small, round, or slender face can undergo mandibular contouring surgery to reduce the width of the lower face. The successful correction of a prominent mandibular angle by conventional angle ostectomy has been reported. But, in the majority of patients with a widened facial appearance, both the mandibular angle and part of the mandibular body anterior to it are protuberant laterally, so both must be resected. The purpose of this study is to introduce a new method of performing mandibular contouring surgery, more effectively and easily, and to reduce postoperative complication and evaluate its results. We treated 6 patients who has prominent mandibular angle using multiple step osteotomy with angle-splitting ostectomy. The advantages of this new method are as following. (1) easily performable (2) effective mandibular contouring surgery by reducing the width of lower face (3) producing a natural relief of the mandibular angle (4) low risk of soft tissue damage and complications (5) shortening of the operation time. etc.