• Tribology and Lubricants
• /
• v.20 no.4
• /
• pp.204-208
• /
• 2004

This paper presents the oil leakage characteristics of the valve stem system in gasoline engines. For the oil leakage investigation, four study models have been prepared as functions of used poppet valve and used valve stem seal, used poppet valve and unused valve stem seal, unused poppet valve and used valve stem seal, and unused poppet valve and unused valve stem seal. With four models, the experimental study on the oil leakage has been investigated for the oil temperature, intake pressure, and camshaft speed. The experimental results show that the sealing performance of the valve stem seal plays an important role on the leakage of the valve stem system. And the appropriate replacement of a stem seal with used poppet valve shows good sealing performance in oil leakage in compared with a new valve system.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.1-6
• /
• 2007

This paper provides the effects on the leakage characteristics of the surface roughness of a valve stem in LPG automotive. The valve stem seal is to stop an oil leakage through a sealing gap between a valve stem and a valve stem seal. The sealing performance of two components is related to a leak safety and a long life of a valve stem and a valve stem seal. The experimental results show that the optimal surface roughness of a valve stem is to recommend as $0.4{\sim}0.5{\mu}m$ in a centerline average roughness, Ra and a uniformly distributed profile of the roughness. Basically the smooth surface and uniform profiles of the roughness may reduce an oil leakage between a valve stem and a valve stem seal.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.7-11
• /
• 2008

This paper presents the experimental results on the oil leakage characteristics of stem seals depending on the driving distance in LPG vehicle. The increased speeds of the camshaft and oil temperatures do not affect to the oil leakage of the seals because of the low level of driving distances less than 40,000 km. But the increased driving distance over 50,000 km to 100,000 km shows a rapid deteriorating the sealing performance, which may increase the oil leakage through the rubbing surfaces between the poppet valves and stem seals. In this result, the stem seal may be exchanged about the driving distance of 50,000 km to 60,000 km with a currently used stem seal in LPG car. Thus, the stem seal for a poppet valve should be resigned for the increased durability and long life.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.421-422
• /
• 2002

The purpose of this paper is to investigate the leakage characteristics of the valve stem in the gasoline engines. Especially, three factors affecting oil leakage are the power cylinder, engine head system, and the positive crankcase ventilation system. Which is the most variables, analysis difficulty is the valve stem seal characteristics. The testing system is used with oil motoring system. The leakage of an engine is analyzed for the cylinder temperature, atmosphere pressure, positive pressure, negative pressure, revolution of the camshaft and the surface roughness of the valve stem.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.1
• /
• pp.85-92
• /
• 2019

The purpose of this study was to compare and evaluate the cytotoxicity of 3 calcium silicate-based materials (CSMs) on stem cells from human exfoliated deciduous teeth (SHEDs). The powder of Retro $MTA^{(R)}$ (RM), $EZ-Seal^{TM}$ (EZ) and ENDOCEM $Zr^{(R)}$ (EN) was eluted with SHED culture media and then filtered. The SHEDs were cultured in the presence of the various concentrations of the eluate. To investigate the effect of the 3 CSMs on SHED proliferation, the MTS (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium) assay was performed. Flow cytometry analysis was also performed to identify any changes in the cellular phenotype. The absorbance values of the SHEDs cultured in the eluate of samples at a 10% concentration showed the following relation: RM > EN > EZ (p = 0.0439). However, the SHEDs maintained their mesenchymal phenotype regardless of product exposure. Although the 3 CSMs did not alter the SHED stem cell markers, EZ may be a less cytocompatible than RM and EN.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.311-312
• /
• 2006

선박의 추진축은 선박의 기관실 최말단부에서 바깥의 프로펠러까지 선체를 관통하여 설치되고 회전하기 때문에 선외로부터의 해수유입을 쳐대한 차단하는 역할을 하는 독특한 메커니즘을 가진 축밀봉장치(Shaft Sealing System)를 필요로 하는데 이것을 스턴튜브 씰(Stem Tube Seal)이라고 한다. 본 연구는 국내 중소형 선사들이 저렴한 가격대비 우수 품질의 씰 및 하우징을 사용할 수 있고 3차원 형상화를 통하여 선박의 운용자가 쉽고 정확하게 스턴튜브 씰을 이해 및 신속 정비가능, 해외업체 생산 규격을 선박 축에 맞게 절단, 접합의 씰 성능저하 관행을 고쳐 선주가 원하는 사양과 규격대로 제작된 우수한 씰 제품을 공급할 수 있고, 선박용 기자재에 대한 기초지식, 씰링 메카니즘, 구조 및 유동 해석 결과를 제공하여 국내 최초의 무접착 원형 메인 씰 개발 및 씰 하우징 제작 및 독자설계 기술을 확립하고자 한다.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.4
• /
• pp.39-42
• /
• 2016

A PFA lined ball valve, which is machined with fluorinated resin PFA to its inner part for improving corrosion resistance, non-stickness, heat-resistance, has been widely used to the chemical/pharmaceutical industries, the semiconductor/LCD manufacturing processes, etc. with the high purity chemicals as working fluid. EPA stated that 60% of all fugitive emissions come from the valve stem packing in a typical petroleum or chemical processing plant. They monitor regulated components for leaks and maintain seal performance at acceptable levels. Korean industrial standards only deals with the bubble test for in-line leakage of valves, which has the detectable leak rate of $10^{-4}$ [$mbar{\cdot}L{\cdot}s^{-1}$], therefore, it is not sufficient to check fugitive emissions. In this study, we conducted Helium leak detection from a PFA lined ball valve and evaluated fugitive emissions according to ISO 15848-1, which has the detectable leak rate of $10^{-9}$ [$mbar{\cdot}L{\cdot}s^{-1}$], for manufacturing the high-reliable PFA lined ball valves against fugitive emissions.

• Korean Journal of Plant Resources
• /
• v.15 no.3
• /
• pp.260-268
• /
• 2002

Morphological characteristics and growth patterns of 20 Polygonatum collections indigenous to Korea were examined and the collections were classified to obtain the basic data for practical use of Polygonatum genetic resources. Based on the cluster analysisi 20 collections were distinctly classified into seven groups with average distance greater than 0.6 between groups. Group I was p. sibiricum Delar, and group II included p. odoratum var. pluriforum Ohwi, P. odoratum var. pturiforum Ohwi 'Variegata' and P. odoratum var. maximowiczii Koidz.. Group III was P. odoratum var. thunbergii Hara, group IV included P. lasianthum var. coreanum Nakai, and group V was P. involucratum Maxim. and P. desoulavyi Komarov. group Ⅵ was P. inflatum Komarov and group Ⅶ was P. humile Fischer ex. Maxim. Morphologically, group I was larger than the other groups, group II and III were medium, and group IV to Ⅶ were small. In the classification of genus Polyognatum, stem length, stem habit, phyllotaxis, stem angularity, petiole, inflorescence, perianth, bract and rhizome were particularly important characters. Group I to III were thought to be useful as the edible and medicinal resources plants, and group IV to Ⅶ were thought to be useful as ornamental plants.

• Korean Journal of Plant Resources
• /
• v.15 no.2
• /
• pp.164-171
• /
• 2002

Morphological characteristics and growth pattern of 10 Polygonatum collections indigenous to Korea were examined to select the promising medicinal, edible resources and horticultural crops. Plant heights of I0 collections ranged from 15 to 102cm. Stem type was ascending or erect, and node numbers per a stem was 6.2 to 23.2. Phyllotaxis type was alternate or verticillate, and leaf shape was elliptical or linear. Leave numbers per a stem was 5.2 to 63.4, and bract types were classified into bracteate and nonbracteate. Flowers bloomed from May 7 to May 30, and flowering period was 5 to 13 days. Inflorescence types were classified into racemose, corymbose, and umbellate. Flower numbers per a stem was 1.5 to 125.2, and flower length was 13.1 to 30.2㎜. Perianth shapes were classified into tubular, constrict and urceolate. Surface colors of rhizome were pale yellow, pale brown, brown, and dark brown. As a result of this experiment, P. sibiricum, P. odoratum var. pluriflorum and P. odoratum var. thunbergii were thought to be useful as the medicinal and edible resources plants. On the other hand, P. odoratum var. pluriflorum 'Variegata', and P. odoratum var. maximowiczii, P. lasianthum. P. involucratum, P. desoulavyi, P. humile, and P. inflatum were thought to be useful as horticultural plants.