• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.57-61
• /
• 2010

Data with collected from 278 trees sampled through out the climatic range of Quercus acuta in Jeju Experiment Forests. The models tested to select the best-fit equations form the Max & Burkhart's model, Kozak's model, and Lee's model. Performance of the equations in predicting of residuals on predicted values. In result, all three models gave slightly better values of fit statistics. In plotting residuals against predicted diameter, Max & Burkhart's model showed underestimation in predicting small diameter and Lee's Model did the same in predicting small diameter. Based on the above analysis of three models in predicting stem taper, Kozak's model was chosen for the best-fit stem taper equations, and its parameter estimates was given for Quercus acuta. Kozak's model was used to develop a stem volume table outside bark for Quercus acuta.

• Journal of Korean Society of Forest Science
• /
• v.95 no.2
• /
• pp.168-173
• /
• 2006

Stem respiration rate ($R_{stem}$) was examined using an open flow system on black locust (Robinia pseudoacacia L.). $R_{stem}$ exponentially increased with increasing air and stem temperature during measurement period and was most closely correlated with stem temperature. It was more closely correlated with stem temperature observed 0.5-2.0 hrs earlier than with current stem temperature, that is, there was time lag between the increase of stem temperature and the efflux of $CO_2$ from stem. $R_{stem}$ gradually increased from spring to summer, and then decreased during autumn. $R_{stem}$ ranged from 0.13 to $4.44{\mu}mol$ $CO_2m^{-2}s^{-1}$. $Q_{10}$ decreased with increasing stem temperature, and varied along position (or diameter) within trees during the same period, especially during the growing season. On the other hand, time lag was shortened with increasing temperature.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.2
• /
• pp.108-112
• /
• 1989

To determine optimal plant density of forage rape in southern areas of Korea, Velox, the highest yielding variety among seventeen introduced varieties of forage rape, was grown under five different plant densities. The results obtained are summarized as follows: 1. Yield components such as stem diameter, number of main stem,leaves, number of branches and number of branch leaves and fresh yield were highest at the plots with 50cm row spacing and 30cm plant spacing. 2. Dry matter yield, content of crude protein, IVDMD and digestible dry matter yield were highest at the plots of broadcasting. 3. Since plants under high density were high in plant length and small in stem diameter, contents of crude fiber such as NDF, ADF, cellulose and lignin were lowest at the plots of broadcasting.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2005.11a
• /
• pp.179-180
• /
• 2005

Non linear finite element analyses were performed in various configurations of stem-ball head. High stresses were found for the cases when the stem tended to penetrate less into the ball head. An upgraded design of the cone may improve the loading of the ball head to resist trauma-like loading more effectively than manipulating the ball diameter. When the surgeon needs to use small ball heads (i.e. 22 mm), the use of zirconia seems to be appropriate also. After simulating a trauma like loading of the materials, it was found that the deepness of the cone to locate the stem is of major importance for the performance of the device. Further work, considering more sizes for the cone design should be performed in order to determine an optimal depth for the cone in relation to the diameter of the ball head. Also the simulation of contacts pairs including polyethylene and CoCr is important for further research.

• Journal of Korean Society of Forest Science
• /
• v.94 no.5 s.162
• /
• pp.313-320
• /
• 2005

This study was performed in a 38-year-old Mongolian pine (Pinus sylvestris L. var. mongolica Litvin) plantation in northeast China. Data were collected from 5 sample trees with different canopy position ranging in DBH from 14.6 cm to 23.8 cm. Sawn speciments that included the biggest knot were taken from the stem below the living crown. Number and distribution of knots per whorl below the living crown were studied by relative height below living crown (RHBC). A linear model expressed as function of whorl age (AGE), whorl height ($H_k$) and the stem diameter at which the whorl was located ($D_k$) was developed to predict the knot diameter and angle. The number of annual rings in four periods and the width of respective zone alone stem were used as dependant variables to analyze the knot develop phases. In average, the number of years from branch birth to ceased forming rings was 7.8, the branches remained alive for 4.2 years without forming annual rings, and branches were occluded 14.4 years after their death. These results can provide abundance branch and knot information so as to describe current and past tree growth dynamic of Mongolian pine plantation.

• Journal of Ginseng Research
• /
• v.12 no.1
• /
• pp.40-46
• /
• 1988

This study was conducted to investigate the optimum temperature and light intensity of photosynthesis and transmittance in the shade for better growth and root yield of ginseng. The 3-year-old ginseng plants grown under the shade of 5, 10 and 20% transmittance did not show any significant difference in the stem length, stem diameter, leaf area and root length. The root diameter markedly increased under the shade of 10% and 20% transmittance, and the root was the heaviest under the shade of 20% transmittance. The 6-year-old ginseng plants grown at 20% transmittance showed the largest root diameter but the root length was not influenced by transmittance. The root was heaviest in the shade of 20% transmittance.

• Journal of Biosystems Engineering
• /
• v.27 no.4
• /
• pp.283-292
• /
• 2002

Mechanical and physical properties of various parts of jujube (Zizyphus jojoba Miller) such as fruits, leaves, secondary branches, and leafy stems were measured and analyzed. The physical dimensions of the fruits were measured using a digital caliper, and the detachment force of the fruit and leafy stems was measured using a force gauge. The physical characteristics of the secondary branches such as the modulus of elasticity and the torsional rigidity were tested using a universal testing machine (UTM). The physical characteristics of leafy stems such as length and weight were also measured using a digital caliper and a digital scale, respectively. The detachment force of leafy stems and the area of the leaf also measured. The terminal velocities of the jujube fruits, leaves, and leafy stems were measured using a custom made terminal velocity experiment system. Diameter of the major and minor axis of the jujube fruit, weight of the fruit, and detachment force of the fruit stem was average of 32.02 mm, 23.92 mm. 10.0 ${\times}$ 10$\^$6/ ㎥, 8.99 g, and 5.43 N. respectively. The detachment forces of the jujube fruits increased and the force-to-weight ratio of the jujube fruits decreased as the weight of the jujube fruits increased. The modulus of elasticity of the secondary branches of the jujube was average of 7.01 ${\times}$ 10$\^$8/ N/㎡ and decreased as diameter of the secondary branches increased. The average torsional rigidity of the secondary jujube branches was 5.2 ${\times}$ 10$\^$-/ N/㎡, and the torsional rigidity decreased as the secondary branch diameter increased. The distribution of the torsional rigidity data associated with the diameter of the branches, however. widely scattered and it was difficult to find any relationship between the diameter of the branches and the torsional rigidity of tile branches. The weight of the leafy stems, number of loaves attached to the leafy stems, diameter of the stem side of the leafy stems, diameter of the leafy stem end was average or 0.7 g, 6.6 ea, 12.2 cm, 4.5 mm, and 2.7 mm, respectively. The major and minor axis of the .jujube loaves, area of leaves, weight of the leaves. and detachment force of the leaves was average of 5.7 cm, 3.3 cm, 12.98 cm$^2$, 0.20 g, and 4.39 N, respectively. The terminal velocity of the .jujube fruits increased as the weight of the fruits increased. The terminal velocity of the leafy stems, however, did not show a relationship with the weight of the leafy stems and the number of leaves attached to the leafy stem. The terminal velocity, however, slightly increased as the length of the leafy stems increased.

• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2005

A multipurpose operating system was developed to adjust both spray times and ventilation method without a configuration of the moving path and the type of the greenhouse. The multipurpose working system proved to be a reliable system for testing the growth quality of the fruit vegetables in the greenhouse. The results are as follows. The first leaf, diameter of a stem, leaf area, and average stem diameter in the Cucumber seedling growth were repressed by high-speed ventilation, but was not repressed by spray times. The first leaf in the Tomato seedling growth was repressed as ventilation velocity was high, but the average stem diameter was not repressed. While the Tomato was given water three times a day, the diameter of a stem and the leaf area were increased as ventilation speed became higher. However, those were different other factors. The Tomato leaf area was larger when given water twice a day than that in hand spray, but showed no difference with ventilation speed. The first leaf, the diameter of a stem and the leaf area of a Red pepper were lower in automatic spraying with ventilation than those in hand spray.

• Korean Journal of Agricultural Science
• /
• v.40 no.2
• /
• pp.87-91
• /
• 2013

The major characteristics of the developed corn hybrids were compared at each different planting time; 1st time(April 28) and 2nd time(August 20), respectively. Among traits surveyed, stem height showed highly at 1st time than 2nd, while ear height, stem diameter and ear length were similar at two times. Sugar content of the used hybrids showed highly at 2nd planting time than 1st. Pericarp thickness was also high at 2nd planting time. Especially, among hybrids CNU99 was the highest in stem height and ear length, CNU11 and CNU56 were high in sugar content, and CNU51 and CNU124 were thiner than other hybrids in pericarp thickness. Accordingly, these hybrids will be planted and recognized in 2nd yield trial for superior corn hybrid selection.

• Korean Journal of Agricultural Science
• /
• v.2 no.1
• /
• pp.125-130
• /
• 1975

This investigation was carried out to define the cultivation state of Ginseng seedling and to study the growth of important characters by location and correlations between characters, the results obtained are summarized as follows; 1. Most of farmers culitvating ginseng seedling had not any special consideration for the improvement of soil, and they applied green manure only as basic fertilizer but they did not apply chemical fertilizer. 2. Any efforts on the improvement of ginseng seed were not found. Seed was harvested from 3 years old ginseng plant. Seedling density was 1.8 cm by 2 cm. 3. Growth of all characters showed significant differences among farms. Coefficients of variation among individual seedling plants was largest at root diameter and smallest at root length. 4. Gromth of all characters without root diameter by planted location under the shadow was poor at front row, however root diameter was shortest at back row. 5. Significant high correlatons were rocognized between root diameter and stem diameter, between leaf blade and stem diameter and between leaf blade and leaf length, but stem length were not correlated with any characters. It is noticable that negative correlations were found between stem length and root diameter, between stem length and root length and between stem length and stem diameter.