• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.229-238
• /
• 2009

In this paper, AWS ECU test method, which is considering behavior of a Bi-modal tram, is described. In order to evaluate the performance of an electronic automotive ECU, the method which combines HILS (Hardware In the Loop Simulation) and RBT (Requirement Based Testing) is introduced. HILS is the method to predict the behavior of a vehicle adopting an ECU. The behavior of a Bi-modal tram can be analyzed by using the vehicle dynamic model. Requirement Based Testing compare the outputs of a real system with a virtual electronic unit (oracle) which created by the requirements. Rear axles of the Bi-modal tram are independently controlled by two AWS ECU. Especially, swing out can happen when an articulated vehicle is operated in the curved road. Therefore dynamic behaviour of a Bi-modal tram is considered at this situation. Through this study, the reliability of ECU can be verified economically and safely using the proposed test method before conducting the track test.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권sup1호
• /
• pp.37-42
• /
• 2016

Studies have shown that smoking is a learnt behavior, often initiated during adolescence. This paper aims to describe tobacco-related knowledge, attitude and associations among school adolescents aged 13-15 with exposure to anti-smoking information. Using data from the Global Youth Tobacco Survey (GYTS) in Viet Nam, 2014, knowledge was measured through 4 questions about tobacco use, and attitude was assessed through 3 questions on personal, social and environmental aspects. Students giving most anti-tobacco responses to all questions were considered as having correct knowledge or appropriate attitude or both. Access to anti-smoking information was determined by exposure to any media messages on tobacco control during the past 30 days and teaching in school about the danger of tobacco use during the past 12 months. A substantial percentage of students thought that being near others who smoke might be harmful to them and smoking is harmful to health (89.4% and 89.6% respectively). However, only 46.4% reported that it is definitely difficult to quit smoking and 66.9% thought that smoking for only 1 or 2 years, once stopped, is harmful to health. Slightly more than half of the respondents reported appropriate attitude that young smokers have fewer friends than others and smoking makes them less attractive and less comfortable at social events. Noticing anti-smoking messages in the media together with having lessons in school about the dangers of tobacco substantially increased the likelihood of having correct knowledge, appropriate attitude and both. Despite relatively high awareness about smoking harms, effective educational communication is still highly needed to improve the level of comprehensive knowledge and an appropriate attitude regarding tobacco use.

• 한국멀티미디어학회논문지
• /
• 제18권3호
• /
• pp.387-400
• /
• 2015

A fuzzy logic based mobile robot navigation system was developed to improve the driving ability without trapping inside obstacles in complex terrains, which is one of the most concerns in robot navigation in unknown terrains. The navigation system utilizes the data from ultrasonic sensors to recognize the distances from obstacles and the position information from a GPS sensor. The fuzzy navigation system has two groups of behavior rules, and the robot chooses one of them based on the information from sensors while navigating for the targets. In plain terrains the robot with the proposed algorithm uses one rule group consisting of behavior rules for avoiding obstacle, target steering, and following edge of obstacle. Once trap is detected the robot uses the other rule group consisting of behavior rules strengthened for following edge of obstacle. The output signals from navigation system control the speed of two wheels of the robot through the fuzzy logic data process. The test was conducted in the Matlab based mobile robot simulator developed in this study, and the results show that escaping ability from obstacle is improved.

• 항공우주시스템공학회지
• /
• 제11권6호
• /
• pp.17-25
• /
• 2017

항공기가 지상에서 주행할 때 지면과 타이어 사이에 걸리는 수직하중 정보는 마찰력, 횡력 계산 시 사용되는 등 항공기 거동에 있어서 주요한 변수이다. 그러나 실제 항공기 주행 시 실시간으로 수직하중 정보를 얻기 힘들고, 실제 시험에서 발생 가능한 비정상적 활주 상황을 방지하기 위하여 사전 해석을 통해 타이어 수직하중 및 항공기 지상 거동 특성을 예측해 볼 필요가 있다. 본 논문에서는 VI-Aircraft S/W를 이용하여 착륙장치 및 Full-Aircraft 모델을 구성하였고 조향 해석 및 활주시험 상황 모사 해석을 통하여 항공기 지상 거동 특성에 대하여 분석하였다.

• 비파괴검사학회지
• /
• 제28권6호
• /
• pp.531-537
• /
• 2008

One of the fundamental features of time reversal acoustic (TRA) techniques is the ability to focus the propagating ultrasonic beam to a specific point within the test material. Therefore, it is important to understand the focusing properties of a TR device in many applications including nondestructive testing. In this paper, we employ an analytical scheme for the analysis of TR beam focusing in a homogeneous medium. More specifically, a nonparaxial multi-Gaussian beam (NMGB) model is used to simulate the focusing behavior of array transducers composed of multiple rectangular elements. The NMGB model is found to generate accurate beam fields beyond the nonparaxial region. Two different simulation cases are considered here for the focal points specified on and off from the central axis of the array transducer. The simulation results show that the focal spot size increases with increasing focal length and focal angle. Furthermore, the maximum velocity amplitude does not always coincide with the specified focal point. Simulation results for the off-axis focusing cases do demonstrate the accurate steering capability of the TR focusing.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.84-89
• /
• 2001

The alignment of the rollers carrying the web is found to be one of important factors to the lateral behavior of the moving web and to the quality of the final web products. But, the perfect alignment of the rollers is not always possible and the web itself can be cambered. Thus the control of lateral behavior of the moving web is critical in the most of web handling systems. The web guiding system that adjusts the angle of the alignment between two adjacent rollers is commonly used in industry. But, in this paper a new web guiding system is proposed by using the lateral dynamics of the moving web induced by a tilted roller in normal direction of a web. The computer simulation study was carried out to verify the steering performance of the suggested guiding system. Computer simulation study shows that the performance of the new guiding mechanism is better than that of an existing guiding mechanism.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.220-225
• /
• 2000

This paper develops a finite element model for studying occupant behavior of a mid-size truck equipped with a driver side airbag. The developed model simulates an occupant behavior using PAM-CRASH/PAM-SAFE in super computer SP2. The model is developed based on a sled test. A 50% hybrid dummy III is used for measuring head and chest accelerations and femur loads, and major injury coefficients such as HIC, CA and femur load. Inferior components such as foot rest, seat, kneebolster, crash pad, etc. are roughly modeled and defined by a rigid material model. And contact type II is used for detecting a contact with dummy. Contact type II definition uses force-deflection relationship of each body Such components as steering column which directly affect on the occupant injuy are modeled in detail and defined by an elastic-plastic material model. Airbag cushion is modeled using rivet elements. Airbag cover groove is modeled using rivet elements. Airbag tether is modeled as nonlinear bar elements. Airbag model has two vent holes to ventilating the exploded gas. Airbag is folded close to the real airbag folding procedure, and folded cautiously in order not to have initial penetration. A vehicle pulse acquired from 31mph frontal barrier test is used as input signal for the simulation. The simulation conditions are tuned to the sled test ones. The measured dummy accelerations and major injury coefficients, and filmed dummy behavior and airbag inflation process using high speed camera are compared to the simulation results to verify the developed finite element model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1213-1218
• /
• 2007

The brake judder comes from non-uniformities in the tire/wheel assembly caused by mechanical effects such as a brake torque variation (BTV). A disc thickness variation (DTV) related with the kinematic behavior of the disc was investigated a main source of BTV. In this study, a dynamic model with brake corner assembly of full vehicle using MSC.ADAMS was correlated by experiment of judder phenomenon. Judder was generated and correlated systematically by judder experiment in chassis and brake dynamometer from variation in the thickness of the disc. Also it has been found a judder transfer path and variation of the braking pressure. Through analysis of transfer function and movement of subsystem caused by BTV generation, design parameters have been found. Based on the results obtained from parameter study of suspension module, the effective design process and developed model with brake corner assembly was suggested for vibration reduction of steering wheel caused by the judder phenomenon.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2013년도 제48차 하계학술발표논문집 21권2호
• /
• pp.293-294
• /
• 2013

다양한 생물체의 행동 원리를 이용하여 모델링한 알고리즘을 생체모방 알고리즘(Biologically Inspired Algorithm)이라고 한다. 본 논문에서는 생체모방 알고리즘 중 동물 집단의 행동을 모델링한 플로킹 알고리즘(Flocking Algorithm)을 이용한 집단 게임 캐릭터의 길찾기 방법을 제안한다. 플로킹 알고리즘의 조타행동은 크게 분리(Separation), 정렬(Alignment), 응집(Cohesion), 회피(Avoidance)로 구성되어 있다. 게임에서의 기존 플로킹 알고리즘은 주로 여러 개의 몬스터나 NPC 들로 구성된 몇 개의 그룹 단위로 독자적인 집단 행동을 하는 경우에 적합하다. 그러나, 게임플레이어가 제어하는 캐릭터가 많은 경우, 기존 알고리즘은 플레이어가 선택한 캐릭터 그룹을 목표지점으로 이동하는 방법으로 적합하지 않다. 따라서 본 논문에서는 게임 플레이어가 제어하는 집단 게임캐릭터의 목표 지점까지의 길찾기를 위한 수정된 정렬 조타행동 알고리즘을 제안한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.39-44
• /
• 1995

The gas nitro-carburizing treatment with the merits of carburizing and nitriding treatment is recently applied to transmission gears. the shafls of an engine oil pump and steering shafls. For all that, the researches of the gas nitro-carburizing treatment are short of the fatigue behavior and the evaluation of fatigue life. In this paer, it is examined for the effect of inclusions and hole defects with fatigue limit and the evaluation of the fatigue strengthaccording tothe hardness and resifualstress with the specimen of a notro-carburizing treatment.