Journal of Aerospace System Engineering (항공우주시스템공학회지)

The Society for Aerospace System Engineering (항공우주시스템공학회)
권호 표지
DOI QR코드

DOI QR Code

A Study of Aircraft Ground Motion

항공기 지상운동 특성에 관한 연구

  • Song, Won Jong (The 7 th Research and Development Institute, Agency for Defense Development)
  • 송원종 (국방과학연구소 제7기술연구본부)
  • Received : 2017.09.25
  • Accepted : 2017.11.10
  • Published : 2017.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Vertical reaction force between ground and tire is an important parameter determining the ground behavior characteristics of aircraft. This parameter can be used to calculate the lateral force and friction. However, it is hard to obtain this parameter in real-time when the aircraft is taxiing. Therefore, pre-analysis of ground behavior and vertical reaction force should be conducted using ground simulation results to prevent rollover or hazardous scenarios. In this paper, a Landing Gear and Full-Aircraft model was constructed using VI-Aircraft S/W. The roll behavior of aircraft was analyzed using steering simulation results compared with taxi-test data.

항공기가 지상에서 주행할 때 지면과 타이어 사이에 걸리는 수직하중 정보는 마찰력, 횡력 계산 시 사용되는 등 항공기 거동에 있어서 주요한 변수이다. 그러나 실제 항공기 주행 시 실시간으로 수직하중 정보를 얻기 힘들고, 실제 시험에서 발생 가능한 비정상적 활주 상황을 방지하기 위하여 사전 해석을 통해 타이어 수직하중 및 항공기 지상 거동 특성을 예측해 볼 필요가 있다. 본 논문에서는 VI-Aircraft S/W를 이용하여 착륙장치 및 Full-Aircraft 모델을 구성하였고 조향 해석 및 활주시험 상황 모사 해석을 통하여 항공기 지상 거동 특성에 대하여 분석하였다.

Keywords

References

  1. J. W. Shin, T. U. Kim, S. C Kim, J. S. Lee and S. J. Chung, "Performance Analysis of the Aircraft Landing Gear," The Korean Society of Mechanical Engineers, pp. 482-487, Nov. 2011.
  2. S. Choi, J. H. Lee, K. D. Cho and C. R. Jung, "An analysis on the ground impact load and dynamic behavior of the landing gear system using ADAMS," Journal of The Korean Society for Aeronautical and Space Sciences, vol. 30, no. 4, pp. 114-122, June 2002. https://doi.org/10.5139/JKSAS.2002.30.4.114
  3. J. D. Han, Y. S Kang, O. S. Ahn and Y. S. Lee, "A Study on Parameters of SUAV Landing Gear Orifice," Journal of The Korean Society for Aeronautical and Space Sciences, vol. 37, no. 1, pp. 99-104, Jan. 2009. https://doi.org/10.5139/JKSAS.2009.37.1.099
  4. W. S. Park, J. U. Hwang, Y. H. Hyun, J. H. Hwang, J. S. Bae and T. U. Kim, "Dynamic Characteristics Analysis of Landing Gear that Consider 6-Degree of Freedom of Helicopter," Journal of Aerospace System Engineering, vol. 2, no. 1, pp. 1-6, Jan. 2008.
  5. J. U. Hwang, J. S. Bae, J. H. Hwang, Y. S. Hong, S. J. Park and T. K. Chung, "Nose Landing Gear Drop-test Simulation using Numerical Analysis about Orifice," Journal of Aerospace System Engineering, vol. 8, no. 1, pp. 18-23, Jan. 2014.
  6. S. N. Kang, Y. Y. Kim, C. H. Kim, Y. J. Kim, J. S. Song, S. Y. Choi and J. S. Shim, "The Nonlinear Shimmy Analysis of T-50 Supersonic Aircraft Using ADAMS," The Korean Society For Aeronautical And Space Sciences, pp. 284-287, April 2003.
  7. J. H. Walls, "Investigation of the Air-Compression process during Drop tests of an Oleo-Pneumatic Landing Gear," NACA-TN-2477, Washington, pp. 5-9, 1951.
  8. W. J. Song, M. S. Yi, J. Y. Kwon and S. J. Chung, "Composition of the Strut model to Simulate Performance of Landing Gear," The Society for Aerospace System Engineering Spring Conference, Jeju, Korea, May 14-16, 2014.
  9. VI-Grade, "VI-Aircraft 17.0 Documentation," VI-Grade GmbH, Marburg, Germany, pp. 146-165, 400-461, 2016.
  10. NATO Standardization Agency, "STANAG 4671 (EDITION 1) - Unmanned Aerial Vehicle Systems Airworthiness Requirements," pp. 1-D-9, 2009.
  11. N. S. Currey, "Aircraft Landing Gear Design : Principles and Practices," AIAA Inc., Washington D.C, pp. 47-50, 1988.
  12. R. Rajamani, D. Piyabongkarn, V. Tsourapas and J. Y. Lew, "Real-Time Estimation of Roll Angle and CG Height for Active Rollover Prevention Applications," American Control Conference, St. Louis, MO, USA, pp. 433-438, June 10-12, 2009.
  13. D. Odenthal, T. Bunte and J. Acjermann, "Nonlinear Steering and Braking Control for Vehicle Rollover Avoidance," European Control Conference, Karlsruhe, Germany, pp. 598-603, Aug. 31-Sep. 3, 1999.