• Structural Engineering and Mechanics
• /
• 제7권5호
• /
• pp.457-471
• /
• 1999

In this paper, different curvature-rates are controlled to highlight the characteristic of viscoplastic response in cyclic bending tests. The curvature-ovalization apparatus, which was designed by Pan et al. (1998), is used for conducting the curvature-controlled experiments on thin-walled tubular specimens for AISI 304 stainless steel under cyclic bending. The results reveals that the faster the curvature-rate implies, the fast degree of hardening of the metal tube. However, the ovalization of the tube cross-section increases when the curvature-rate increases.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.306-309
• /
• 2007

In this study, hydroforming characteristic of the double-layered tube was investigated in the hydroforming process. The double-layered tube can be made outer surface on the stainless steel by only one processing. The free bulging test was performed to analysis optimized pressure and axial feeding amount of the double layered tubes. And the experimental results between stainless/carbon and carbon/carbon double-layered tube were compared with the forming data. Moreover analysis model that can be hydroformability and predictable forming pressure of double-layered tube was presented.

• 대한기계학회논문집A
• /
• 제27권12호
• /
• pp.2011-2018
• /
• 2003

To analyze the bending collapse behavior of an aluminum square tube beam under a bending load, a finite element simulation for the four-point bending test has been performed. Using an aluminum tube beam specimen partly inserted with two steel bars, the local buckling deformation near the center of the tube beam was induced. The maximum bending load and the bending collapse behavior obtained from the numerical simulation were in good agreement with experimental results. Using a combination of the four-point bending test and its finite element simulation, analysis of the local buckling and the accompanied bending collapse behavior of aluminum tube beam could be quantitative accomplished.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.210-214
• /
• 1995

Research on concrete-filled steel columns has been conducted. It is also well known that the load and deformation capacity of concrete-filled steel columns are considerable larger than those of widely used reinforced concrete columns and steel encased concrete columns because the concrete core in the steel is confined laterally by the steel. But, most of these works focused on columns with strength enhancement by the confinement effect, so that no local buckling prevented by the concrete. columns because the concrete core in the steel is confined laterally by the steel. But, most of these works focused on columns with strength enhancement by the confinement effect, so that no local buckling prevented by the concrete. This paper, therefore, presents on the stress-strain relation of a concrete filled rectangular steel tube under axial compression. As the results, the axial load verse average axial strain relationship of concrete-filled rectangular steel columns were very stable. The small B/t ratios in concrete-filled rectangular steel columns aren't affected prevention of local buckling but strength enhancement by confinement effect.

• Earthquakes and Structures
• /
• 제19권3호
• /
• pp.197-214
• /
• 2020

Diagrid structures have been introduced as a fairly modern lateral load-resisting system in the design of high-rise buildings. In this paper, a novel diagrid system called tube-in-tube diagrid building is introduced and assessed through pushover and incremental dynamic analyses. The main objectives of this paper are to find the optimum angle of interior and exterior diagrid tube and evaluate the efficiency of diagrid core on the probability of collapse comparing to the conventional diagrid system. Finally, the seismic performance factors of the proposed system are validated according to the FEMA P695 methodology. To achieve these, 36-story diagrid buildings with various external and internal diagonal angles are designed and then 3-D nonlinear models of these structures developed in PERFORM-3D. The results show that weight of steel material highly depends on diagonal angle of exterior tube. Adding diagrid core generally increases the over-strength factor and collapse margin ratio of tall diagrid buildings confirming high seismic safety margin for tube-in-tube diagrid buildings under severe excitations. Collapse probabilities of both structural systems under MCE records are less than 10%. Finally, response modification factor of 3.0 and over-strength factor of 2.0 and 2.5 are proposed for design of typical diagrid and tube-in-tube diagrid buildings, respectively.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.112-114
• /
• 2004

현재 다발의 광섬유를 생산하기 위해서는 Fig. 1과 같이 stainless steel strip으로 광섬유들을 둘러싸고, 이를 레이저로 용접하여 광섬유 튜브를 생산하는 방법이 이용되고 있다. (중략)

• 비파괴검사학회지
• /
• 제22권2호
• /
• pp.187-192
• /
• 2002

서로 연결되어 있는 강관의 결함을 검사할 수 있도록 하기 위한 개폐식 탐촉자를 제작하였다. 본 탐촉자는 기존의 외삽형 와전류 탐촉자로서는 탐상이 불가능한 설치 가동중인 튜브류의 검사를 위한 것이다. 리본 케이블과 커넥터로 구성된 여기 코일은 접합/단락이 가능하게 하였으며 감지 코일은 튜브 외벽 근처에 원주 방향으로 어레이 형태로 배치하였는데 여기 코일로부터 튜브 직경의 약 1.5배정도 떨어진 위치이다. 제작된 탐촉자를 강관에 적용한 결과, 감도나 결함 크기 구분 등의 성능은 자기 포화형 탐촉자에 미치지 못하나 비교적 큰 결함의 발견이나 위치 파악 등에는 적용 가능한 것으로 나타났다. 크랙 형태의 표면 결함의 경우 두께의 19% 이상의 결함을 찾을 수 있었다.

• Journal of Welding and Joining
• /
• 제28권1호
• /
• pp.41-46
• /
• 2010

The low alloy-steel material(1.0Cr-0.5Mo, SA213T12), which has widely been used for the waterwall tube in the conventional power plant, do not have enough creep rupture strength for waterwall tubes of the Ultra-supercritical(USC) boilers. According to this reason, the high-strength low alloy-steel(2.25Cr-1.0Mo, SA213T22) has newly been adopted for the waterwall tube in the USC boilers. This paper presents failure analysis on weld-joint of the waterwall tubes in USC boilers. Visual inspections were performed to find out the characteristics of the fracture. Additionally both microscopic characteristics and hardness test were carried out on failed tube samples. Failures seem to happen mainly because the welding process has not been conducted strictly.(preheating, P.W.H.T and so forth). Thus, this paper has the purpose to describe the main cause of the poor welding process and to explain how to prevent similar failures in those weld-joints.

• 조명전기설비학회논문지
• /
• 제17권1호
• /
• pp.17-24
• /
• 2003

본 논문에서는 네온 변압기의 효율을 높이기 위하여 주 자속과 누설 자속의 흐름을 분석하고, 이에 따른 압연 방향과 주 자속과의 방향을 최대한 일치 시켜서 자속에 의한 손실을 최소화 하고 역율을 향상시킨 고효율의 네온관용 변압기를 제시 하였다. 그리고 정격 부하시, 단락시 및 무부하시의 각각의 자속 분포를 해석하고 이를 응용하여 부하측 이상 발생시 즉시 전원이 차단될 수 있는 전자식 차단 장치를 개발부착 하였다. 즉 네온관의 파손이나 누전으로 인한 화재나 인체 감전의 위험을 사전에 방지 할 수 있는 전자식 보호 기능을 내장한 자체 진단형의 무방향성 코어의 압연 방향성을 고려한 고효율의 네온관용 변압기를 구현하였다.

• 한국강구조학회 논문집
• /
• 제23권3호
• /
• pp.317-326
• /
• 2011

최근 CFT(Concrete Filled Steel Tube) 부재는 뛰어난 구조성능으로 인하여 그 사용범위가 확대되고 있다. 본 연구에서는 축력과 반복수평력을 받는 콘크리트 충전 내진 각형강관 기둥의 연성을 평가하는 실험을 수행하였다. 내진 각형강관은 SN400B 후판재를 냉간 프레스 성형하여 2개의 ㄷ자로 절곡한 후 기둥 폭의 중앙에서 2-seam 용접하는 방식으로 제작하였다. 강관의 폭두께비, 축력비, 가력방법을 변수로 총 8개의 실험체를 제작하여 실험을 수행하였고, 축하중과 반복수평력을 가력하기 위하여 2대의 액츄에이터가 사용되었다. 실험결과를 통해 기둥의 휨내력, 변형능력 및 에너지소산능력을 평가하였으며, 반복수평력에 대한 기둥의 연성거동 또한 평가되었다.